Résumé du contenu de la page N° 1
AS73CES
Dryer
Asciugatrice
Secadora
Résumé du contenu de la page N° 2
Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference. This User Manual will • Help you use your machine in a fast and safe way. • Read the User Manual before installing and starting your product. • In
Résumé du contenu de la page N° 3
1 Important safety information This section includes safety information that or adaptors to connect the dryer to will help protection from risks of personal power supply in order to decrease the injuries or materialistic damages. Failure risk of electric shock. to follow these instructions shall cause • Do not make any changes on the plug any warranty and reliability commitment to supplied with the product. If it is not become void. compatible with the socket, have a qualified electr
Résumé du contenu de la page N° 4
places where it will be exposed to • Underwear that contains metal outdoor conditions. reinforcements should not be placed in • Do not tamper with the controls. a dryer. Damage to the dryer can result • Do not perform any repair or part if metal reinforcements come loose replacing procedures on the product during drying. even if you know or have the ability to • Check all garments for forgotten perform unless it is clearly suggested lighters, coins, metal pieces, needles, in the operating
Résumé du contenu de la page N° 5
2 Installation Ventilation hose and connecti- Refer to the nearest Authorised Service Agent for installation of your product. on (for products equipped with CPreparation of location and electrical an outlet vent) installation for the product is under Ventilation hose allows exhaust air from customer’s responsibility. inside the machine BInstallation and electrical connections Vented dryer has 1 air outlet. must be carried out by a qualified Stainless sheet metal or aluminum pipes personn
Résumé du contenu de la page N° 6
Important: • The hose should be attached to a BThe ventilation hose should not be height of maximum 80 cm. connected to the chimney of a stove or • Make sure that the hose is not pinched a fireplace. or bend. BDo not operate your product at the • The end of the hose should not be same time with heaters such as a coal bent, it should not be stepped on and or gas stove. Airflow may cause the it must not be folded between the drain chimney to flare up. and the product. Connection to wa
Résumé du contenu de la page N° 7
on the machine. Otherwise, the “tank circuit without grounding. full” light of your machine will illuminate • Connection must comply with national and stop the programme. regulations. C If the dryer is mounted on the washing • If the current value of the fuse or machine by means of a bracket, use of breaker in the house is less than 16 the water drain hose is recommended. Amps, have a qualified electrician install The drain hose should be directed a 16 Amp fuse. downwards as shown in the fig
Résumé du contenu de la page N° 8
Transportation of the machine 1. Unplug the machine from the mains. 2. Remove the water drain (if any) and chimney connections. 3. Drain water remained in the machine completely before transportation. Disposing of the old machine Dispose of your old machine in an environmentally friendly manner. Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your machine. Before disposing of your old machine, cut off the power cable plug and make the lo
Résumé du contenu de la page N° 9
3 Initial preparations for drying Things to be done for energy saving: • Make sure that you operate the product at its full capacity but pay attention to A B C D not exceeding it. Low • Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is decreased. • Pay attention to dry same types of l n m laundry together. • Follow the instructions in the user manual for programme selection. • Make sure that sufficient clearance
Résumé du contenu de la page N° 10
• Do not dry items cleaned with industrial Correct load capacity chemicals in the dryer. • Do not dry your unwashed laundry in the dryer. • Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer. • Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcem
Résumé du contenu de la page N° 11
Following weights are given as examples. Approximate Home articles weights (g) Cotton quit covers 1500 (double) Cotton quit covers (single) 1000 Bed sheets (double) 500 Bed sheets (single) 350 Large tablecloths 700 Small tablecloths 250 Tea napkins 100 Bath towels 700 Hand towels 350 Approximate Garments weights (g) Blouses 150 Cotton shirts 300 Shirts 200 Cotton dresses 500 Dresses 350 Jeans 700 Handkerchiefs (10 pieces) 100 T-Shirts 125 Loading • Open the loading door. • Place laundry items
Résumé du contenu de la page N° 12
4 Selecting a Programme and Operating Your Machine Control panel 1 2 3 4 6 5 7 8 1. Filter cleaning warning light 5. Programme selection knob Warning light turns on when the filter is Used to select a programme. 6. Start/Pause/Cancel button full. 2. Program follow-up indicator Used to start, pause or cancel the Used to follow-up the progress of the programme. 7. Water tank warning light* current programme. 3. Cancel audio warning Warning light turns on when the water Used to cancel the au
Résumé du contenu de la page N° 13
Preparing the machine machine. 1. Plug in your machine. Anti-creasing 2. Place the laundry in the machine. A 2-hour anti creasing programme to 3. Press the “On/Off” button. prevent laundry from creasing will be C Pressing the “On/Off” button does not activated if you do not take the laundry necessarily mean that the programme out after the programme is over. This has started. Press "Start/Pause/Cancel" programme rotates the laundry in button of the machine to start the 10-minute intervals t
Résumé du contenu de la page N° 14
Program selection and consumption table EN Approximate Spin speed in amount of Drying time Programs Capacity (kg) washing machine remaining (minutes) (rpm) humidity Cottons / Coloreds 1200-1000 % 60 135 7 900-800 % 70 160 Ready to Wear A 1200-1000 % 60 80 3.5 900-800 % 70 100 1200-1000 % 60 145 7 900-800 % 70 170 Ready to Wear + A 1200-1000 % 60 90 3.5 900-800 % 70 105 1200-1000 % 60 100 7 900-800 % 70 120 Ready to Iron A 1200-1000 % 60 65 3.5 900-800 % 70 85 Mini 1.2 1200-1000 %50 30 Shir
Résumé du contenu de la page N° 15
Auxiliary function 4. Delayed operation of the selected Cancel audio warning program is started by pressing the "Start/ Your dryer will give an audio warning when Pause/Cancel" button after selecting the the programme comes to an end. If you time delay. do not want to hear the audio warning, C Additional laundry may be loaded / taken press “Cancel Audio Warning” button. out during the time delay period. The relevant light will turn on when this C During the time delay period, laundry is
Résumé du contenu de la page N° 16
Changing the programme after it has process, but this process will extend the started programme duration and increase energy You can use this feature to dry your clothes consumption since the drying will be under higher or lower temperatures after interrupted continuously. Therefore, it is your dryer has started. recommended to add laundry before the For example; drying programme has started. 1. Press and hold the “Start/Pause/Cancel” Child-proof lock button for about 3 seconds to “Cancel”
Résumé du contenu de la page N° 17
selection knob to its previous position, cycle. the programme will be terminated Press “On/Off” button to turn off the since the position of the programme dryer. selection knob is changed. The drying CFinal step of the drying cycle (cooling light turns on and the machine remains step) is performed without heat on hold until a new programme is application in order to keep the items selected and the “Start/Pause/Cancel” at a temperature that would not harm them. button is pressed. CA 2-hour a
Résumé du contenu de la page N° 18
5 Maintenance and cleaning Cover filter To clean the sensor: Lint and fibres released from the laundry to 1. Open the loading door of the dryer. the air during the drying cycle are collected 2. Allow the machine to cool down if drying in the “Cover Filter”. has been carried out. 3. Wipe the metal sensors with a soft cloth, dampened with vinegar and dry them. CClean metal sensors 4 times a year. ANever use solvents, cleaning agents or similar substances when cleaning since these materials ca
Résumé du contenu de la page N° 19
3. If there is lint accumulation in the water tank cover, clean it and press to close. 4. Place the water tank into its seat. For the condenser (products with a condenser) Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank. CClean the condenser after every 30 drying cycles or once a month. To clean the condenser: 1. If a drying process has been carried out, open the door o
Résumé du contenu de la page N° 20
6 Solution suggestions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water. Laundry come out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. • Excessive laundry might have been loaded in. Do not overload the machine. Machine does not switch on or the program does not start. Machine is not activated when set. • It might have not been plugged in. Make sure that the machine is plugged in. • The loading door may b
