Résumé du contenu de la page N° 1
REFRIGERATOR USER INSTRUCTIONS
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.amana.com for additional information. If you still need assistance, call us at 1-800-843-0304. In
Canada, visit our website at www.amanacanada.ca or call us at 1-800-807-6777.
You will need your model and serial number located on the right-hand side of the refrigerator interior.
Table of Contents / Índice /
Résumé du contenu de la page N° 2
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions: ■ Plug into a grounded 3 prong outlet. ■ Use nonflammable cleaner. ■ Do not remove ground prong. ■ Keep flammable materials and vapors, such as gasoline, away from refrigerator. ■ Do not use an adapter. ■ Use two or more people to move and install refrigerator. ■ Do not use an extension cord. ■ Disconnect power before installing ice maker (
Résumé du contenu de la page N° 3
Location Requirements Electrical Requirements WARNING WARNING Explosion Hazard Electrical Shock Hazard Keep flammable materials and vapors, such as Plug into a grounded 3 prong outlet. gasoline, away from refrigerator. Do not remove ground prong. Failure to do so can result in death, explosion, or fire. Do not use an adapter. Do not use an extension cord. To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your Failur
Résumé du contenu de la page N° 4
Water Supply Requirements Connect Water Supply Gather the required tools and parts before starting installation. Read all directions before you begin. Read and follow the instructions provided with any tools listed IMPORTANT: If you turn the refrigerator on before the water line here. is connected, turn the ice maker OFF. TOOLS NEEDED: Connect to Water Line ■ Flat-blade screwdriver ■ ¹⁄₄" Nut driver ■ ⁷⁄₁₆" and ¹⁄₂" Open-end or two ■ ¹⁄₄" Drill bit 1. Unplug refrigerator or disconnect power.
Résumé du contenu de la page N° 5
4. Turn shutoff valve ON. 4. Turn shutoff valve ON. 5. Check for leaks. Tighten any connections (including 5. Check for leaks. Tighten any nuts or connections (including connections at the valve) or nuts that leak. connections at the valve) that leak. A Complete the Installation B WARNING C D A. Tube clamp C. Compression nut B. Copper tubing D. Valve inlet 6. The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install Electrical S
Résumé du contenu de la page N° 6
■ Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your Crisper Humidity Control food may spoil. (on some models) NOTE: Adjusting the Refrigerator and Freezer Controls to a You can control the amount of humidity in the moisture-sealed higher (colder) than recommended setting will not cool the crisper. Adjust the control to any setting between LOW and compartments any faster. HIGH. LOW (open) for best storage of fruit
Résumé du contenu de la page N° 7
To Dispense Ice: 1. If the ice storage bin is located on the door, remove the Ice Maker and Storage Bin temporary shield from underneath the ice storage bin. See “Ice Maker and Storage Bin.” Turning the Ice Maker On/Off 2. Press the button to select the desired type of ice. To turn ON the ice maker, simply lower the wire shutoff arm. To manually turn off the ice maker, lift the wire shutoff arm to the WARNING OFF (arm up) position and listen for the click. NOTE: Your ice maker has an automati
Résumé du contenu de la page N° 8
After changing the filter, reset the filter status light by pressing the To Clean Your Refrigerator: FILTER RESET button. The status light will change from red to NOTE: Do not use abrasive or harsh cleaners such as window green when the system is reset. sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or Non-Indicator Water Filter (on some models) gaskets. Do
Résumé du contenu de la page N° 9
TROUBLESHOOTING First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call. In the U.S.A., www.amana.com In Canada, www.amanacanada.ca Refrigerator Operation ■ Rattling - flow of refrigerant, water line, or from items placed The refrigerator will not operate on top of the refrigerator ■ Sizzling/Gurgling - water dripping on the heater during defrost cycle WARNING ■ Popping - contraction/expansion
Résumé du contenu de la page N° 10
Off-taste, odor or gray color in the ice Temperature and Moisture ■ New plumbing connections? New plumbing connections Temperature is too warm can cause discolored or off-flavored ice. ■ Ice stored too long? Discard ice. Wash ice bin. Allow ■ New installation? Allow 24 hours following installation for 24 hours for ice maker to make new ice. the refrigerator to cool completely. ■ Odor transfer from food? Use airtight, moisture proof ■ Door(s) opened often or left open? Allows warm air to en
Résumé du contenu de la page N° 11
The water dispenser will not operate properly WATER FILTER CERTIFICATIONS ■ Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.” ■ Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open. ■ Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See
Résumé du contenu de la page N° 12
PERFORMANCE DATA SHEETS Base Grille Water Filtration System Model T2WG2L/T2RFWG2 Capacity 200 Gallons (758 Liters) Model T2WG2/T2RFWG2 Capacity 200 Gallons (758 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class II*; and against NSF/ANSI Standard 53 for the reduction of Mercury, Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran. This system has been tested according to NSF/ANSI Standards 42
Résumé du contenu de la page N° 13
Base Grille Water Filtration System Model T1WG2L/T2RFWG2 Capacity 200 Gallons (758 Liters) Model T1WG2/T2RFWG2 Capacity 200 Gallons (758 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class II*; and against NSF/ANSI Standard 53 for the reduction of Mercury, Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran. This system has been tested according to NSF/ANSI Standards 42 and 53 for the reductio
Résumé du contenu de la page N° 14
® AMANA MAJOR APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Amana brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Amana”) will pay for factory specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Amana designated service company. This limited warranty is valid only in
Résumé du contenu de la page N° 15
INSTRUCCIONES PARA EL USUARIO DEL REFRIGERADOR LE AGRADECEMOS la compra de este producto de alta calidad. Si usted experimenta un problema que no se haya cubierto en SOLUCIÓN DE PROBLEMAS, visite nuestro sitio de internet en www.amana.com para obtener información adicional. Si considera que aún necesita ayuda, llámenos al 1-800-843-0304. En Canadá, visite nuestro sitio de internet en www.amanacanada.ca o llámenos al 1-800-807-6777. Necesitará tener a mano su número de modelo y de serie ubic
Résumé du contenu de la page N° 16
Antes de tirar su viejo refrigerador o congelador: Cómo deshacerse adecuadamente de su ■ Saque las puertas. refrigerador viejo ■ Deje los estantes en su lugar para que los niños no puedan meterse con facilidad. ADVERTENCIA Peligro de Asfixia Remueva las puertas de su refrigerador viejo. No seguir esta instrucción puede ocasionar la muerte o daño al cerebro. IMPORTANTE: El atrapamiento y asfixia de niños no es un problema del pasado. Los refrigeradores tirados y abandonados son un peligro, a
Résumé du contenu de la page N° 17
NOTA: No se recomienda instalar el refrigerador cerca de un horno, radiador u otra fuente de calor. No instale el refrigerador Requisitos del suministro de agua cerca de una ubicación en la que la temperatura puede bajar de Reúna las herramientas y piezas necesarias antes de comenzar los 55°F (13°C). la instalación. Lea y siga las instrucciones provistas con cualquiera de las herramientas enlistadas aquí. HERRAMIENTAS NECESARIAS: ■ Destornillador de hoja plana ■ Llave para tuercas de ¹⁄₄"
Résumé du contenu de la page N° 18
Conexión del suministro de agua Lea todas las instrucciones antes de comenzar. Conexión al refrigerador IMPORTANTE: Si usa el refrigerador antes de instalar la conexión del agua, ponga la fábrica de hielo en la posición Estilo 1 apagado (OFF). 1. Desenchufe el refrigerador o desconecte el suministro de energía. Conexión a la línea de agua 2. Fije el tubo de cobre a la entrada de la válvula usando una tuerca de compresión y manga de compresión como se 1. Desenchufe el refrigerador o desconec
Résumé du contenu de la page N° 19
Estilo 3 1. Desenchufe el refrigerador o desconecte el suministro de energía. USO DE SU REFRIGERADOR 2. Retire y descarte el tapón de nylon negro del tubo de agua gris en la parte trasera del refrigerador. Uso de los controles 3. Enrosque la tuerca provista sobre la válvula de agua como se Para su comodidad, los controles de su refrigerador han sido muestra. programados en la fábrica. Cuando instale su refrigerador por NOTA: Apriete la tuerca a mano. Luego apriétela dos vueltas primera vez
Résumé du contenu de la page N° 20
Si necesita regular las temperaturas en el refrigerador o en el que el agua comience a correr. Una vez que el agua comenzó congelador, utilice como guía los ajustes que se enumeran en la a correr, continúe presionando y soltando la barra del tabla siguiente. Espere por lo menos 24 horas entre ajustes. despachador (5 segundos activado, 5 segundos desactivado) por otros 2 minutos. Este proceso eliminará el CONDICIÓN/MOTIVO: AJUSTE: aire en el filtro y en el sistema de despacho de agua. En alg
