Résumé du contenu de la page N° 1
REFRIGERATOR-
FREEZER
ZBB 7266
INSTRUCTION BOOKLET
2223 445-22
Résumé du contenu de la page N° 2
IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of safety.You MUST read it care
Résumé du contenu de la page N° 3
Disposal of old Appliances At the end of the Appliance The symbol on the product or on its packaging Life indicates that this product may not be treated as household waste. Instead it shall be handed over to When disposing of your appliance, use an the applicable collection point for the recycling of authorised disposal site. electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent Remove the plug and ensure that any locks or potential neg
Résumé du contenu de la page N° 4
OPERATION Do not use soap or detergent as the smell may Before using linger. Dry thoroughly. Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Control panel A - Appliance button ON/OFF D - Temperature and function indicator B - Freezer Thermostat control knob E - Function button/ reset alarm F - Fridge Thermostat control knob C - Temperature indication button DISPLAY 1. If on, the indicated tempera
Résumé du contenu de la page N° 5
Temperature indication Activation of functions In normal conditions, the display indicates the freezer Each time button E is pressed, the following functions temperature (symbol 2). are activated in a clockwise direction: Each time button C is pressed, the display indicates in Symbol 5 : fast freeze function sequence: Symbol 6 : shopping function 1. symbol 1 turns on and indicator 4 shows the No Symbol: Normal operation temperature of the fridge compartment; Not more than one function can be ac
Résumé du contenu de la page N° 6
wrap in polythene bags and place on the glass shelf Normal Operating Sounds above the salad drawers. You may hear faint gurgling or bubbling sounds Meat can only be stored safely in this way for when the refrigerant is pumped through the coils one or two days at the most. or tubing at the rear, to the cooling Fruit & vegetables: these should be thoroughly plate/evaporator. cleaned and placed in the salad drawers. When the compressor is on, the refrigerant is Butter & cheese: these should be
Résumé du contenu de la page N° 7
Frozen food storage Making ice cubes The appliance is provided with one or more trays for When you first start the freezer or if the freezer has ice-cubes trays. been out of use for some time, we advise you to run your appliance for at least 24 hours in the «fast Fill the tray(s) 3/4 full to give the ice space to expand freeze» mode before storing frozen food. and place them in the freezer compartment. Do not exceed the storage period indicated by the To release the ice cubes simply give the tra
Résumé du contenu de la page N° 8
Moveable shelves The walls of the refrigerator have runners so that the shelves can be positioned as desired . For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be adjusted in height.To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes off, then reposition as required. Freezing Calendar The symbols sh
Résumé du contenu de la page N° 9
HINTS AND TIPS Food Storage In the Event of a Power Failure To obtain the best results from your appliance, If there is a power failure during the storage of frozen neither hot foods nor liquids which may foods, keep the door closed. If the temperature within evaporate, should be placed in the larder your freezer should rise do not refreeze the food compartment. without checking it’s condition. The following guide- lines should assist you. Keep the time between buying chilled food and placin
Résumé du contenu de la page N° 10
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried Changing the light bulb out, DISCONNECT the appliance from the ELECTRICITY supply. Should the interior light fail to work, first switch off the appliance and disconnect from the electricity supply, then replace the bulb as follows; Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. Important : Insert the 2 upper shelves in the
Résumé du contenu de la page N° 11
SOMETHING NOT WORKING Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee. Before contacting your local Service Force Centre, check the following points: Symptom Solution No power to the appliance Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown. The light does not come on Ensure t
Résumé du contenu de la page N° 12
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure
Résumé du contenu de la page N° 13
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been u
Résumé du contenu de la page N° 14
TECHNICAL SPECIFICATIONS POWER SUPPLY VOLTAGE AND FREQUENCY 230-240 V / 50 Hz TOTAL POWER ABSORBED 160 W AVERAGE DAILY UNITS ELECTRICITY * 0.91 kWh GROSS CAPACITY Fridge 164 l Freezer 162 l NET CAPACITY Fridge 91 l Freezer 78 l STAR RATING * This figure is based on standard test results in accordance with European Standard EN 153. Actual consumption will depend on how the appliance is used and where it is located. 14
Résumé du contenu de la page N° 15
INSTALLATION Important Warning It must be possible to disconnect the appliance from IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, the mains power supply; the plug must therefore be easily accessible after installation. YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “D
Résumé du contenu de la page N° 16
The plug moulded onto the lead incorporates a fuse. For replacement, use a 13amp BSI362 fuse. Only Electrical connections ASTA or BSI approved fuses should be used. Any electrical work required to install this appliance The plug must not be used if the fuse cover/carrier is should be carried out by a qualified electrician or lost. The cover/carrier is indicated by the coloured competent person. insert at the base of the plug. WARNING:THIS APPLIANCE MUST BE A replacement cover/carrier must be obt
Résumé du contenu de la page N° 17
Instructions for totally built-in appliances Door reversal The appliance is supplied with the right or left door opening.To change the opening direction of the door proceed as in the following instructions before installing it. 1. Unscrew the upper pin and remove the spacer. 2. Remove the upper pin and the upper door. 3. Unscrew the middle hinge. 4. Remove the lower door. 5. Unscrew the lower pin and refit it on the opposite side 6. Refit the lower door. 7. Rescrew the middle hinge und th
Résumé du contenu de la page N° 18
Make sure that a distance of 44 mm is maintained in the lower part between the kitchen furniture and the border of the appliance. The lower hinge cover inserted in the accessories 1 bag, is useful to guarantee the exact position of the kitchen furniture and the appliance. Also make sure that the appliance does not clamp 2 the mains cable Fasten the appliance with 4 screws provided in the kit included with the appliance. I I Apply the sealing strip pushing it between the refrigerator and the adja
Résumé du contenu de la page N° 19
Separate parts Ha, Hb, Hc, Hd as shown in the figure. Place guide (Ha) on the inside part of the furniture door, up and down as shown in the figure and mark
the position of external holes. After having drilled holes, fix the guide with the screws supplied.
Fix cover (Hc) on guide (Ha) until it clips into place Open the appliance door and the furniture door at 90°. Insert the small square (Hb) into guide (Ha). Put together t
Résumé du contenu de la page N° 20
Place the small square on the guide again and fix it with the screws supplied. Should the lining up of the furniture door be necessary, use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly. Fix cover (Hd) on guide (Hb) until it clips into place. Fix the appliance to the side of the kitchen unit, fit the bracket (E)and (F), adjust the distance , and fix using the screws (as in figure). Fit the cover (D).
