Instruction d'utilisation Global Machinery Company BS800

Résumé du contenu de la page N° 1

INSTRUCTION MANUAL
800 Watt
Belt Sander
• London • Melbourne • Perth • Taipei • Verona
BS800
• Hong Kong • New York • Auckland • Paris 031222 ED5 DR

Résumé du contenu de la page N° 2

Contents Warranty 2 Full 2 Years Warranty Whilst every effort is made to ensure your complete sat- Introduction 3 isfaction with this tool, occasionally, due to the mass Specifications 3 manufacturing techniques, a tool may not live up to our required level of performance and you may need the General safety instructions 3 assistance of our service department. Additional safety rules for sanders 4 This product is warranted for a 2-year period from the date of the original purchase. If found to be

Résumé du contenu de la page N° 3

Dear Customer Description of symbols If you require any help with your product, whether it is a The rating plate on your tool may show symbols. These Warranty claim, spare part or user information: represent important information about the product or instructions on its use. Please phone our Help Line for an immediate response. The appropriate number is given on the rear page of this Wear hearing protection. manual. Wear eye protection. Wear breathing protection. Introduction Double insulated

Résumé du contenu de la page N° 4

1. Keep the work area clean and tidy. Cluttered work better and safer performance. Follow the instructions areas and benches invite accidents and injury. regarding lubrication and accessory changes. Inspect tool cords periodically and, if damaged, have them 2. Consider the environment in which you are working. repaired by an authorised service facility. Inspect Do not use power tools in damp or wet locations. Keep extension cords periodically and replace them if the work area well lit. Do not ex

Résumé du contenu de la page N° 5

cookers and refrigerator enclosures. or the bag. 20. Use only approved parts. When servicing, use only • Do not continue to use worn, torn or heavily clogged identical replacement parts. Use an authorised service sanding belts. facility to fit replacement parts. • Do not touch the moving sanding belt. • Ensure that you have removed foreign objects such as Additional safety rules for sanders nails and screws from the work before commencing Warnings. Before connecting a tool to a power source sand

Résumé du contenu de la page N° 6

Assembly The Sander is packed, fully assembled. Know your product 1. Front handle 2 2. Main handle 3. Dust collection bag 5 4. Lock on button(not shown) 5. On/Off switch 6. Drive roller 7. Sanding belt tension lever 9 8. Front belt roller 6 9. Belt rotation direction indicator 7 10. Tracking adjustment knob 8 11. Dust extraction port 11 1 3 10 6

Résumé du contenu de la page N° 7

4. Fold down the lever (7). Switching on and off 5. Plug the sander into a power point and with the sander held tight, pull the trigger on/off switch (5) and allow the belt to rotate for a short period. 6. Whilst the belt is running, adjust the tracking knob (10) to align the belt to 1. Pull the on/off trigger (5) upward to start the sander. the centre of the roller 2. Release the trigger to turn off the sander. (6). 3. By pulling the trigger on and pressing the lock on 7. Repeat the trigger act

Résumé du contenu de la page N° 8

purchase good quality belts. Dust extraction Note. After sanding with a belt sander, an orbital sander 1. Disconnect the plug from should be used to give a better surface finish. the power supply. 2. Firmly push the plastic Sanding nozzle of the dust bag 1. The sander is designed for sanding wood, metal, plastic (3) onto the dust and similar materials. It is used mainly for quickly extraction port (11). removing a large amount of material. Do not use this 3. Before removing the dust sander for s

Résumé du contenu de la page N° 9

Cleaning 1. Keep the tool’s air vents unclogged and clean at all times. 2. Remove dust and dirt regularly. Cleaning is best done with a rag. 3. Re-lubricate all moving parts at regular intervals. 4. If the body of the sander needs cleaning, wipe it with a soft damp cloth. A mild detergent can be used but nothing like alcohol, petrol or other cleaning agent. 5. Never use caustic agents to clean plastic parts. Caution. Water must never come into contact with the sander. Repairs 1. Only an authori

Résumé du contenu de la page N° 10

Carefully read the entire Instruction Manual before using this product. With continuing product development changes may Before returning this product for a have occurred which render the product received Warranty Claim or any other reason slightly different to that shown in this instruction Please Call 1300 880 001 (Australia) manual. The manufacturer reserves the right to or 0800 445 721 (New Zealand) change specifications without notice. Note: Specifications may differ from country to