Résumé du contenu de la page N° 1
Precision Health Scale
UC-321PBT-C
Instruction Manual
1WMPD4001968B
Résumé du contenu de la page N° 2
Contents Before Use Precautions --------------------------------------------------------------------------------------1 Scale Components ------------------------------------------------------------------------------ 2 Display Symbols --------------------------------------------------------------------------------- 3 Installing (or Replacing) Batteries ---------------------------------------------------------- 3 Pairing The PBT-C Series Device With a Continua-Compliant Manager ---------- 4
Résumé du contenu de la page N° 3
Scale Components Display Back Ready/Complete Symbol Low Battery Indicator Slide Switch Front Battery Compartment Measurement Switch The following measurements can be selected by the slide switch and are classified into two categories - WEIGHT A and WEIGHT B. Within WEIGHT A and WEIGHT B, you have a choice to select and have your weight displayed in kg or lb. Use the WEIGHT B category to enable the radio to send measurement results.
Résumé du contenu de la page N° 4
Display Symbols Ready/Complete symbol. This symbol is displayed when the measurement display is stable. Low battery indicator. If this symbol is displayed, replace all four batteries with new ones. Installing (or Replacing) Batteries Caution Insert each battery with its positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment. Improper installation of the batteries may cause battery leakage. Replace all four batte
Résumé du contenu de la page N° 5
Pairing The PBT-C Series Device With a Continua-Compliant Manager Model UC-321PBT-C is a PBT-C series device. PBT-C series devices are designed to be connected only with Continua Managers. To pair the device with a Manager, please follow these steps: 1. Remove the four AA batteries from the device. 2. Discharge the device completely by trying to take a measurement. Press the “Measurement” switch, tap the toe switch, or tap the surface of the device as appropriate. Note: the measureme
Résumé du contenu de la page N° 6
Basic Measurement Measuring Your Weight Set the slide switch 1. Set the slide switch to the correct mode. to the correct mode Example: Set the slide switch to [WEIGHT B]. Press the measurement switch 2. Press the measurement switch gently. All display segments are displayed for several seconds. Ready/Complete symbol 3. Wait until the symbol is displayed. Wait until “0.0 kg /0.0 lb” and the Ready/Complete symbol are displayed. Note: If “0.0 kg /0.0 lb” and the Rea
Résumé du contenu de la page N° 7
Basic Measurement Measuring an Infant or Small Animal Set the slide switch to the correct mode 1. Set the slide switch to the correct mode. Example: Set the slide switch to [WEIGHT B]. Press the measurement switch Step on the scale 2. Press the measurement switch gently and step on the scale. All display segments are displayed for several seconds. Step on the scale without any baby Ready/Complete symbol or animal in your arms before “0.0 kg /0.0 lb” is displayed. kg 3
Résumé du contenu de la page N° 8
Measuring Your Weight on a Carpet Place the scale on a solid level surface, such as tile, wood, or laminate flooring. If the scale must be used on a carpet, be sure to attach the plastic add-on feet. Steps for Attaching the Add-on Feet 1. Each add-on foot has two pins. Match those pins to the holes on the scale leg and insert firmly. 2. Attach add-on feet on all four legs. Notes Please be careful not to fall when using the add-on feet. We recommend using this scale on a sol
Résumé du contenu de la page N° 9
Specifications Digital display Liquid crystal display, 25 mm character height Maximum capacity 200 kg / 450 lb Minimum display 0.1 kg / 0.2 lb Wireless communication WML-40AH (Mitsumi Electronics Co. Ltd.) Bluetooth Ver.2.1 Class 1 HDP Continua certified Power source Four type AA batteries (R6P or LR6, 1.5 volt x 4) Battery life Approximately 1000 measurements Accessories Add-on feet (4), Instruction manual, batteries(4) Specifications are subject to change without prior noti
Résumé du contenu de la page N° 10
Transmitting Data to a Continua Manager Measurement results will be automatically transmitted to the paired Manager at each measurement. In the case of unsuccessful transmission, the device stores the last 25 measurements in memory. The device will send all of the data at the next successful connection and clear memory. Before Requesting Service Problems Corrective Action Nothing is displayed by pressing the Check the battery installation. measurement switch. Replace all four batte
Résumé du contenu de la page N° 11
MEMO 10
Résumé du contenu de la page N° 12
A&D Company, Limited 1-243 Asahi, Kitamoto-shi, Saitama 364-8585 JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LTD. Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D Australasia Pty Ltd. 32 Dew Street, Thebarton, South Australia 5031 AUSTRALIA Telephone: [61] (8) 8301-8100 Fax
