Résumé du contenu de la page N° 1
Thermostat With Humidity Control
WHITE-RODGERS
Digital 7-Day Programmable
TM
90 Series
P R E M I U M
1F95-391
Operating Instructions
Retain for Future Use
Résumé du contenu de la page N° 2
Easy, Menu-Driven Set-Up and Programming 8 9 1 2 3 4 5 6 7 10 11 12 Premium options 17 16 15 14 13 to customize the thermostat to fit your application.
Résumé du contenu de la page N° 3
ORIENTATION THE THERMOSTAT BUTTONS Used with TIME /TIME Selects fan operation (see The FWD 13 6 See inside front cover for illustration Display page 3). This button is also BACK to set the clock. showing button locations. used to program the fan to run Used to adjust the time backward, 7 (Blue arrow) Lowers temperature 1 continuously during a program period. or to select the previous menu item. setting (45°F or 7°C minimum) Used to enter the service menu to 14 Used to adjust the time forwa
Résumé du contenu de la page N° 4
LARGE LIGHTED (LCD) DISPLAY shown, one word at a time (PRGM Displays FAN ON when the fan is 4 The thermostat display alternately MODE, EMR, COOL FAN DELA operating continuously. Displays FAN shows the current time and the current OFF, etc.). AUTO when the fan cycles with the temperature on the left side. The CHECK STAT appears when the 2 heating or cooling system. display also shows the temperature thermostat detects certain problems Displays the setpoint temperature. 5 you have programmed or
Résumé du contenu de la page N° 5
INTRODUCTION Thank you for purchasing your You will find information about new White-Rodgers 90 Series thermostat buttons (page 1) and thermostat with humidity control. display beginning on page 2. White-Rodgers has been producing energy saving controls for over 60 years. We have been designing and producing the White-Rodgers 90 Introduction ..................................................... 3 Series family of electronic pro- Configuration ..............................................4-11 gr
Résumé du contenu de la page N° 6
CONFIGURATION The configuration menu allows you to set thermostat operating characteristics to your system or personal requirements. FWD BACK FWD and TIME once at the same time. Press TIME to advance through the To enter the menu, press TIME menu options. Press arrow keys to change options. User Configuration Menu Step Press Button(s) Displayed Press or to select: COMMENTS Ref (Factory Default) Page Adjusts temperature display higher or lower. FWD 1 0 °F 5
Résumé du contenu de la page N° 7
User Configuration Menu (Continued) Adjusts temperature display between °F or °C 7 FWD (°F) °C 8 TIME Set Fan (one shot) option. Set the duration of the 8 8 FWD SET FAN 0 HRS (OFF) to TIME one shot option. (0) 6 HRS 8 ON allows second stage to energize if setpoint is raised 8 10 FWD HEAT FAST OFF TIME 3 or more degrees. OFF (economy) minimizes second (ON) stage operation on setpoint changes. ON allows second stage to energize if setpoint is 11 TIME FWD COOL FAST OFF 9 (OFF) lowered 3 or mor
Résumé du contenu de la page N° 8
User Configuration Menu (Continued) Enables outdoor temperature sensor. Requires optional 16 TIME FWD ON 10 TEMP OUT F145-1378 outdoor sensor. (OFF) tions in large buildings where extra adjust, refer to the CONFIGURATION CONFIGURATION MENU section (page 5, step 1). time to reach the set temperature may FEATURES be desired, EMR Long may be Adjustable Temperature Display. selected. When EMR ON L is selected Selectable Energy Management (User menu, Item 1), The room in the user menu (page 5, item
Résumé du contenu de la page N° 9
conditions and/or personal preference, humidity. For suggested settings see minutes (or 3 hours, 45 minutes if EMR ON L is selected). The maximum time in you may wish to adjust the thermostat table below. cooling and heat pump applications is 3 display higher or lower (up to +/- hours and 45 minutes. Cooling or heat 20%). For example, if the thermostat Programmable Dehumidification pump applications start earlier because it displays room humidity of 40% but Optimal Comfort Mode (OPTM you want it
Résumé du contenu de la page N° 10
Programmable Dehumidification Fahrenheit or Celsius fan to normal operation before the end of Optimal Dehumidification Mode Temperature Display. the time period, press the FAN button. (OPTM DHUM) (User menu, Step 7) This thermostat (User Menu step 6)When turned on is factory set to display temperature in Beeper on. this feature automatically reduces Fahrenheit. If you prefer, you may (User menu, Step 9) The thermostat indoor humidity if humidity is 2% configure the thermostat to display has a
Résumé du contenu de la page N° 11
Cool Fast. you want to install the thermostat in a different program periods. This allows (User menu, Step 11) This feature, separate room to prevent tampering. the system to maintain a comfortable when set to ON, will bring the second After installing and connecting the environment by giving higher priority stage of cooling on any time you remote sensor(s) to the thermostat, the to occupied locations. At the same manually lower the temperature three installer can enable each remote indoor time,
Résumé du contenu de la page N° 12
press PROGRAM VIEW to advance The sensor must be properly con- SENSOR the time period you wish to modify, nected and enabled using the User L A B then press the HUMIDITY button. On menu. The display shows the outdoor MOR AVG HI LO the display in place of period of day temperature from -40° to 140°F by DAY HI AVG LO (MOR, DAY, EVE, NHT) the priority pressing the light button twice within EVE HI AVG LO of the sensor and the sensor identifica- one second when the thermostat is in NHT AVG HI LO tion
Résumé du contenu de la page N° 13
FWD Keypad Lockout Menu (Must be in User Menu to enter Keypad Lock Menu- press and hold Time and BACK Time for one second or more). Step Press Button(s) Displayed Press or to select: COMMENTS Ref (Factory Default) Page FWD ON 1 TIME ON Disables all keypad functions except Temp Up and PART LOCK 10 & 11 Down. User may temporary override within (OFF) lowest programmed setpoint in cooling and highest programmed setpoint in heating. FWD TIME
Résumé du contenu de la page N° 14
PROGRAMMING MANUAL OPERATION TIME with the thermostat set to Heat, Cool, 3. Press SET again. The display (Bypassing the Program) FWD or Auto. Fill out the blank schedules will show minutes. Use TIME BACK Your White-Rodgers 90 Series (pages 16 & 17) with the time and or TIME to set to the current thermostat can be used to control temperatures you want in your minutes. temperature manually (without program. Fill in every space for your RUN 4. Press PROGRAM . programming). For manual operation,
Résumé du contenu de la page N° 15
9. If you program Monday the first schedule. If you want the fan ON VIEW time you press PROGRAM it continuously during this period, press will be copied to the rest of the week. FAN the button. To program the other days of the week VIEW 12.Press PROGRAM one time. ADV. press DAY to until you reach the MOR on the display will change to day you wish to change and follow DAY. Repeat steps 10 and 11 to enter Steps 10, 11 & 12. You can also copy time and temperature for this period. the program fr
Résumé du contenu de la page N° 16
7-Day Sample HEAT Program Schedule (Shows factory programming) 1 2 3 4 5 6 5 6 5 6 5 6 6:00 AM 70°F (21°C) 8:00 AM 62°F (16°C) 5:00 PM 70°F (21°C) 10:00 PM 62°F (16°C) MON 6:00 AM 70°F (21°C) 8:00 AM 62°F (16°C) 5:00 PM 70°F (21°C) 10:00 PM 62°F (16°C) TUE 6:00 AM 70°F (21°C) 8:00 AM 62°F (16°C) 5:00 PM 70°F (21°C) 10:00 PM 62°F (16°C) WED 6:00 AM 70°F (21°C) 8:00 AM 62°F (16°C) 5:00 PM 70°F (21°C) 10:00 PM 62°F (16°C) THU 6:00 AM 70°F (21°C) 8:00 AM 62°F (16°C) 5:00 PM 70°F (21°C) 10:00 PM 62°F
Résumé du contenu de la page N° 17
7-Day Sample COOL Program Schedule (Shows factory programming) 1 2 3 4 5 6 5 6 5 6 5 6 MON 6:00 AM 78°F (25°C) 8:00 AM 85°F (29°C) 5:00 PM 78°F (25°C) 10:00 PM 82°F (27°C) TUE 6:00 AM 78°F (25°C) 8:00 AM 85°F (29°C) 5:00 PM 78°F (25°C) 10:00 PM 82°F (27°C) WED 6:00 AM 78°F (25°C) 8:00 AM 85°F (29°C) 5:00 PM 78°F (25°C) 10:00 PM 82°F (27°C) THU 6:00 AM 78°F (25°C) 8:00 AM 85°F (29°C) 5:00 PM 78°F (25°C) 10:00 PM 82°F (27°C) FRI 6:00 AM 78°F (25°C) 8:00 AM 85°F (29°C) 5:00 PM 78°F (25°C) 10:00 PM
Résumé du contenu de la page N° 18
7-Day Personal HEAT Program Schedule 1 2 3 4 5 6 5 6 5 6 5 6 MON TUE WED THU FRI SAT SUN 1 Morning (MOR) 2 Day (DAY) 3 Evening (EVE) 4 Night (NHT) 5 Start Time 6 Temperature 16
Résumé du contenu de la page N° 19
7-Day Personal COOL Program Schedule 1 2 3 4 5 6 5 6 5 6 5 6 MON TUE WED THU FRI SAT SUN 1 Morning (MOR) 2 Day (DAY) 3 Evening (EVE) 4 Night (NHT) 5 Start Time 6 Temperature 17 Programming
Résumé du contenu de la page N° 20
FEATURES Temporary Program Override Pushbutton Backlight maximum and 15-minute minimum. The large numbers and letters on your Any time your program is running and Beyond 19 hours you may wish to use you would like to override it for a LCD screen make it easy to see. In low the vacation hold feature (pages 19 & light conditions, press the button on specific amount of time, press 20). If you need to, you can adjust the top of the thermostat and the display or until the temperature you temperatur
