Résumé du contenu de la page N° 1
English Español
For Your Records and
Warranty Assistance
T T Type ype ype A Models A Models A Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
Viente __________________________________________
Model Name
__________________________________________
21322
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42857-01
20081204
©2008 Hunter Fan Co
Résumé du contenu de la page N° 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
Résumé du contenu de la page N° 3
Mounting and Optional Accessories Understanding Mounting Support Brace Hunter’s patented mounting system provides you maximum ease in installing your fan. This fan was designed to be mounted only on flat ceilings and can be used on ceilings less than 8 feet high. Low Profile Considering Optional Accessories Ceiling Mounting Outlet Box Style Consider using Hunter’s optional accessories, including a wall-mounted or remote speed control. To install and use the accessories, follow the instruc
Résumé du contenu de la page N° 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
Résumé du contenu de la page N° 5
2 • I 2 • In ns st ta al ll li in ng t g th he H e Ha an ng ge er B r Br ra ac ck ke et t CAUTION: To avoid possible electrical shock, before installing your fan, Hanger disconnect the power by turning off the circuit breakers to the outlet box Bracket and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. Canopy 2-1. Drill two pilot holes into the wood support stru
Résumé du contenu de la page N° 6
3 • Assembling and Hanging the Fan 3-1. Position the square hanger so that the green ground wire attached Step 3-1 to the square faces out of the large opening in the metal bracket. 3-2. Holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling plate. WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling. Square 3-3. Install two locking screws through the
Résumé du contenu de la page N° 7
4 •Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 4-1. Disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. 4-2. To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. CAUTION: Be sure no bare wire or wire strands are visible aft
Résumé du contenu de la page N° 8
5 • Installing the Motor Housing Step 5-1 5-1. Place the fan housing over the motor. 5-2. Align the keyholes in the fan housing with the two partially Motor installed canopy screws in the hanger bracket. Rotate the fan housing to situate the screws in the narrow ends of the keyholes. Fan Housing 5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. 5-4. Install the rubber plugs into the holes over the canop
Résumé du contenu de la page N° 9
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal. 6-3. Remove the blade mounting screws and rubber shipping bumper
Résumé du contenu de la page N° 10
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two
Résumé du contenu de la page N° 11
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) 7-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together Plug one way. Make sure the connectors are properly aligned before Connector connecting them. Incorrect connection could cause improper operation and damage to the product. 7-7. Place th
Résumé du contenu de la page N° 12
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-9. If the fandangle is attached to the extra pull chain, remove it now. 7-10. Attach the extra pull chain (included) to the fan pull chain using Breakaway Connector the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.) 7-11. Thread the fan pull chain
Résumé du contenu de la page N° 13
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Uninstalling the Light Fixture 7-16. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire. 7-17. Disconnect the plug connectors between the two white wires. 7-18. Remove the two screws attaching the light kit to the lower switch housing. 7-19. Remove the light fixture from the lower switch housing, pulling Lower Switch Housing disconnected wires th
Résumé du contenu de la page N° 14
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. The light pull chain cont
Résumé du contenu de la page N° 15
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade bracket screws until snug. 2. Tighte
