Instruction d'utilisation Hunter Fan 28445

Résumé du contenu de la page N° 1

Installation Instructions
For Hunter Ceiling Fan Light Kits
Preparing for Installation
CAUTIONS
1. Unassemble the fan switch housing as shown
in Figure 1.
· Read entire text carefully before
2. Disconnect the upper and lower plug
beginning installation and save these
connectors between the upper switch housing
instructions.
and lower switch housing.
· To reduce the risk of electrical shock,
Note: Do not discard any parts. You will need
install this light kit only on listed Hunter
to replace it

Résumé du contenu de la page N° 2

Installing the Light Fixture Removing the Wiring Harness from the 2. Reconnect the upper plug connector from the Lower Switch Housing upper switch housing to the lower plug connector in the light fixture. Before you can install the light fixture, you must remove the wiring harness and its components Note: Both plug connectors are polarized and from the lower switch housing. You must then will only fit together one way. Make sure that install the wiring harness into the light fixture. both con

Résumé du contenu de la page N° 3

Installing Globes and Bulbs 1. Remove the lockwashers from the light sockets. Place the lip of the globe into the cup and tighten the lockwasher onto the socket until the globe is secure. 2. Install three Max 60 Watt standard medium- base bulbs. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38125 United States of America © 2004 Hunter Fan Company 3 41716-01 06/17/2004