Résumé du contenu de la page N° 1
INSTALLATION AND OPERATING
INSTRUCTIONS
TM
REFLECTIONS
36" Electric Fireplace
P/N 850,019M REV. B 04/2007
LENNOX HEARTH PRODUCTS
MODELS
LSE-36R
This installation manual will enable you to obtain a safe, efficient and
dependable installation of your electric fireplace. Please read and under-
stand these instructions before beginning your installation.
Do not alter or modify the fireplace or its components under any
circumstances. Any modification or alteration of the fireplace system,
includi
Résumé du contenu de la page N° 2
1. IMPORTANT: Before starting your fireplace CONGRATULATIONS! installation, read these installation instruc- tions carefully to be sure you understand them In selecting this DAVE LENNOX Signature™ Collection electric fireplace, you have completely and in entirety. Failure to follow chosen the finest and most dependable fireplace found anywhere. A beautiful and these instructions may result in a possible prestigious addition to the finest homes. Welcome to a Family of hundreds of electric sho
Résumé du contenu de la page N° 3
13. Do not insert or allow foreign objects to 5. Cut the bottom band and remove the car- UNPACKING THE UNIT enter any ventilation or exhaust opening, as ton wrapper (6). The wrapper can be used as Refer to Figure 2 for identification of the this may cause an electric shock, fire, or a working surface in front of the installation components as the product is unpacked. damage to the appliance. opening. Be sure to identify all components before 14. To prevent a possible fire, do not block air 6. R
Résumé du contenu de la page N° 4
FRAMING SPECIFICATIONS 36 ¹⁄₄" (921 mm) Electrical 46" 51 ¹⁄₄" Junction (1168 mm) 6 x 6 (1302 mm) Box 39 ¹⁄₄" 4 x 4 (997 mm) 2 x 4 72 ¹⁄₂" (1841 mm) Electrical 41 ¹⁄₂" Junction (1054 mm) 38" Box (965 mm) 34" 38" (Header (864 mm) 39 ¹⁄₄" (997 mm) (965 mm) Location) Corner View 4" (102 mm) 22" 9" (559 mm) Front View (229 mm) (Recommended) Side View Figure 3 FIREPLACE SPECIFICATIONS 27 ¹⁄₂" (699 mm) 22" (559 mm) Top View 23 ⁷⁄₈" (606 mm) 45 ⁵⁄₈" 34 ³⁄₄" (1159 mm) (883 mm) 33 ⁵⁄₈" 20 ⁵⁄₈" (854 mm) (
Résumé du contenu de la page N° 5
Note: The TV screen protrudes below the ASSEMBLY OUTLINE Television Assembly bottom frame of the tray assembly. Be sure to Before You Start support the tray assembly above the work Lay the television tray assembly onto a flat surface to protect the TV screen. Use the Check your inventory list to be sure you have surface. Use a cardboard protector to protect spacers from the TV box to do this. all the necessary parts supplied in good us- the tray from marring. able condition. Check also for
Résumé du contenu de la page N° 6
UNIT INSTALLATION 1. Prepare the framed opening as illustrated in Framing Specification on page 4. The header location is important. Verify the minimum distance before starting the installation. 2. Locate the main electrical connection on the left side of the fireplace and connect it to the outlet installed during the framing. Verify that the power to the receptacle is off. Secure At These 3. Lift and slide the unit into the opening until Three (3) the face is flush up against the wall. Secu
Résumé du contenu de la page N° 7
UNIT ACTIVATION At this time all connections should be made and tested to assure proper operation. 1. Locate the DVD disk for the DVD player in the envelope with these instructions. Remove the disk and set it aside. It will be installed shortly. 2. Locate the florescent bulb in the bottom of ember compartment and install it into the socket at that location (refer to Figure 8 ). 3. Locate the Television RCA cord, suspended from the fireplace top. Connect this cable to the jacks located at the
Résumé du contenu de la page N° 8
MANTELS (Logs Not Shown Combustible and Non-combustible mantels For Clarity) may be installed at any height above the appli- ance opening. Tabs CLEARANCE TO COMBUSTIBLES Sides: 0 mm - 0 inches Glass Floor: 0 mm - 0 inches Top: 0 mm - 0 inches Front Lip Tabs CABINET INSTALLATIONS Cabinets are available from your dealer which Up allow for fast, convenient installation of your (Front) (Back) (Front) fireplace against existing walls. Figure 13 ELECTRICAL CONNECTIONS A 15AMP, 120 Volt, 60Hz circuit,
Résumé du contenu de la page N° 9
DO NOT USE THIS FIREPLACE IF ANY PART OF IT HAS BEEN UNDERWATER. IMMEDI- ATELY CALL A QUALIFIED SERVICE TECHNI- CIAN TO INSPECT THE FIREPLACE AND RE- PLACE ANY PART OF THE ELECTRICAL SYS- A TEM WHICH HAS BEEN UNDER WATER. HARD (DIRECT) WIRE CONNECTION (Notch) C B If desired, a qualified electrician may remove the cord connection and wire this unit directly to the household wiring. A D E Any electrical re-wiring of this appliance must be done by a qualified electrician. (Notch) C INSTALLING THE
Résumé du contenu de la page N° 10
REMOTE CONTROL OPERATION PICTURE ADJUSTMENT A The Reflections Electric Fireplace is provided The television will come with all adjustments D with an Infrared Remote Control. All func- at normal. If you wish to enhance the color, tions of the fireplace are provided through the adjustments can be made. B remote. The remote provided with the T.V. should not be used. Step 1. Press the MENU button so that the E C menu display appears on the TV screen. The functions identified on the remote (see S
Résumé du contenu de la page N° 11
IR Transmitter Location Figure 19 MAINTENANCE OF MOTORS The motors used on the fan are pre-lubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater is recommended. CAUTION: MAKE SURE THAT THE POWER IS TURNED OFF BEFORE PROCEEDING. WIRING DIAGRAM Wiring diagrams are provided here for reference purposes only. CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DANGE
Résumé du contenu de la page N° 12
TROUBLESHOOTING DIAGRAM TROUBLESHOOTING: Miscellaneous Errors: Before beginning any troubleshooting, check that the following items are setup correctly. The unit should be plugged in and have power. The remote has the batteries installed properly. The ember bulb is installed. If these steps are correct, the embers will turn on and off with the hand held remote. Symptom: Problem/Test: Repair: • Plug any 110V lamp or night light into • If the receptacle is good, check for out of • No Power to
Résumé du contenu de la page N° 13
REPLACEMENT PARTS 1 9 11 8 4 3 2 5 7 12 13 10 6 LSE-36R No. DESCRIPTION Part No. Qty. Electric Fireplace Assembly – – 1. Refractory, (3 Piece Set) 42M46 1 2. Glass 42M50 1 3. Screen, (with Pulls) 66M45 2 4. Log Set (Boxed) H1091 1 5. Ember Bed 42M40 1 6. Grate LB-102458 1 7. Remote Control H1455 1 8. Floor LB-102434 1 9. Track, Door 499482 1 10. Door Support LB-102450 1 11. Door Clips LB-98109 2 12. Grille LB-102408 1 13. DVD Disk 42M35 1 Note: Lennox does not supply replacement bulbs. Use onl
Résumé du contenu de la page N° 14
ACCESSORY PARTS AND COMPONENTS ACCESSORY COMPONENTS FOR THE LSE-36R The following items are available for use with this appliance. The accessory parts and components shown on this page are to be used only with your LSE-36R electric fireplace. Separate instal- lation instructions are packaged with all ac- cessories. If you encounter any problems or have ques- tions concerning the installation or applica- tion of this system, please contact your dis- tributor. For the name of your nearest dis- Upg
Résumé du contenu de la page N° 15
NOTE: THIS PAGE INTENTIONALLY LEFT BLANK. NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 15
Résumé du contenu de la page N° 16
The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information. Printed in U.S.A. © 2003 by Lennox Hearth Products 1110 West Taft Avenue P/N 850,019M REV. B 04/2007 Orange, CA 92865 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 16
