Résumé du contenu de la page N° 1
*INFMANU4440*
Résumé du contenu de la page N° 2
SAFETY GUIDELINES WARNING! An authorized Pride Provider or qualified technician must perform the initial setup of this scooter and must perform all of the procedures in this manual. The symbols below are used throughout this owner's manual and on the scooter to identify warnings and important information. It is very important for you to read them and understand them completely. WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated procedures can cause eithe
Résumé du contenu de la page N° 3
CONTENTS I. INTRODUCTION .........................................................................................................................4 II. SAFETY...........................................................................................................................................5 III. YOUR SCOOTER ......................................................................................................................19 IV. BATTERIES AND CHARGING ................................
Résumé du contenu de la page N° 4
I. INTRODUCTION SAFETY Welcome to Pride Mobility Products Inc. (Pride). The product you have purchased combines state of the art components with safety, comfort, and styling in mind. We are confident the design features will provide you with the conveniences you expect during your daily activities. Understanding how to safely operate and care for this product should bring you years of trouble free operations and service. Read and follow all instructions, warnings, and notes in this manual before
Résumé du contenu de la page N° 5
II. SAFETY PRODUCT SAFETY SYMBOLS The symbols below are used on the scooter to identify warnings, mandatory actions, and prohibited actions. It is very important for you to read and understand them completely. Pinch/Crush points created during assembly. Corrosive chemicals contained in battery. EMI/RFI - This product has been tested and passed at an immunity level of 20 V/m. Explosive conditions exist! Do not expose to heat sources such as open flame or sparks. Do not transport batteries with
Résumé du contenu de la page N° 6
II. SAFETY Maximum seating weight. Unlocked and in freewheel mode. Place unit on level ground and stand to one side when changing from drive mode to freewheel mode or freewheel mode to drive mode. Locked and in drive mode. Front-to-rear plug orientation. Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and gloves when handling batteries and wash hand after handling. Do not place the scooter in freewheel mode when on an incline or decline. Not a bra
Résumé du contenu de la page N° 7
II. SAFETY Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions. Do not remove anti-tip wheels. Do not use a cell phone, walkie/talkie, laptop, or other radio transmitter while operating. Avoid exposure to rain, snow, ice, salt, or standing water whenever possible. Maintain and store in a clean and dry condition. This scooter does not meet ISO 7176-19 requirements for transport of an occupied scooter in a motor vehicle. Manufactured in. Removal of grounding pr
Résumé du contenu de la page N° 8
II. SAFETY Do not allow unsupervised children to play near the scooter while the batteries are charging. Do not use batteries with different amp-hour (Ah) capacities. Do not mix old and new batteries. Always replace both batteries at the same time. Keep your hands away from the tires when driving. Be aware that loose fitting clothing can become caught in drive tires. Battery charger for indoor use only. Disposal and recycling - Contact your authorized Pride Provider for information on proper dis
Résumé du contenu de la page N° 9
II. SAFETY GENERAL MANDATORY! Do not operate your new scooter for the first time without completely reading and understanding this owner’s manual. Your scooter is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an extensive variety of products to best fit the individual needs of the scooter user. Please be aware that the final selection and purchasing decision regarding the type of scooter to be used is the responsibility of the scooter user who is capabl
Résumé du contenu de la page N° 10
II. SAFETY Perform the following inspections prior to using your scooter: Check for proper tire inflation. Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on each tire if equipped with pneumatic tires. Check all electrical connections. Make sure they are tight and not corroded. Check all harness connections. Make sure they are secured properly. Check the brakes. Check battery charge. Ensure the manual freewheel lever is in drive mode before sitting on your scooter.
Résumé du contenu de la page N° 11
II. SAFETY When climbing an incline, try to keep your scooter moving. If you must stop, start up again slowly, and then accelerate cautiously. When driving down an incline, do so by setting the speed adjustment dial to the slowest setting and driving in the forward direction only. If your scooter starts to move down the incline faster than you anticipated or desired, allow it to come to a complete stop by releasing the throttle control lever. Then push the throttle control lever forward slightly
Résumé du contenu de la page N° 12
II. SAFETY When you approach an incline, it is best to lean forward. See figures 1 and 2. This shifts the center of gravity of you and your scooter toward the front of the scooter for improved stability. NOTE: When negotiating ramps, if the throttle control lever is released while moving forward, the powered scooter may "roll back" approximately 3 feet (1 meter) before the brake engages. If the throttle control lever is released while moving in reverse, the powered scooter may "roll back" appro
Résumé du contenu de la page N° 13
II. SAFETY OUTDOOR DRIVING SURFACES Your scooter is designed to provide optimum stability under normal driving conditions—dry, level surfaces composed of concrete or asphalt. However, Pride recognizes that there will be times when you will encounter other surface types. For this reason, your scooter is designed to perform admirably on packed soil, grass, and gravel. Feel free to use your scooter safely on lawns and in park areas. Avoid driving on uneven terrain and/or soft surfaces. Avoid tall
Résumé du contenu de la page N° 14
II. SAFETY INCLEMENT WEATHER PRECAUTIONS Exposure of your scooter to inclement weather conditions should be avoided whenever possible. If sud- denly caught up in rain, snow, severe cold or heat while operating your scooter, proceed to shelter at the earliest opportunity. Thoroughly dry your scooter before storing, charging, or operating your scooter. PROHIBITED! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery surfaces can cause damage to the scooter and electrical syste
Résumé du contenu de la page N° 15
II. SAFETY ELEVATORS Modern elevators have a door edge safety mechanism that, when pushed, reopens the door(s). If you are in the doorway of a elevator when the door(s) begin to close, push on the rubber door edge or allow the rubber door edge to contact the scooter and the door will reopen. Use care that pocketbooks, packages, or scooter accessories do not become caught in elevator doors. NOTE: If your scooter’s turning radius is greater than 60 in. (152.4 cm), it may be difficult to maneuver
Résumé du contenu de la page N° 16
II. SAFETY PREVENTING UNINTENDED MOVEMENT WARNING! If you anticipate being seated in a stationary position for an extended period of time, turn off the power. This will prevent unexpected motion from inadvertent throttle control lever contact. MOTOR VEHICLE TRANSPORT Pride recommends that you do not remain seated in your scooter while traveling in a motor vehicle. The scooter should be stowed in the trunk of a car or in the back of a truck or van with batteries removed and/ or properly secured.
Résumé du contenu de la page N° 17
II. SAFETY REACHING AND BENDING Avoid reaching or bending while driving your scooter. Bending forward creates the risk of accidental throttle control lever contact. Bending to the side while seated creates the risk of tipping. It is important to maintain a stable center of gravity and keep the scooter from tipping. Pride recommends that the scooter user determine his/her personal limitations and practice bending and reaching in the presence of a qualified attendant. WARNING! Do not bend, lean, o
Résumé du contenu de la page N° 18
II. SAFETY FLAMMABILITY PRECAUTIONS WARNING! Even though the plastics used on your scooter have been tested and have passed the applicable flammability standards, Pride recommends that you do not expose your scooter to open flames. WARNING! Replace worn or damaged upholstery immediately to reduce the risk of fire hazard. WARNING! Be aware that washing of upholstered items may reduce the resistance to flammability of the fabric. ELECTROMAGNETIC AND RADIO FREQUENCY INTERFERENCE (EMI/RFI) WARNING!
Résumé du contenu de la page N° 19
III. YOUR SCOOTER TILLER CONSOLE The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial, throttle control lever, battery condition meter, lights switch, and horn buttons. See figure 4. PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console does become exposed to moisture, do not attempt to operate your scooter until the tiller console has dried thoroughly. BATTERY CONDITION METER SPEED ADJUSTMENT D
Résumé du contenu de la page N° 20
III. YOUR SCOOTER Lights Switch This switch controls your scooter’s lights. Toggle the switch forward to turn on your scooter’s front top light and running lights. Toggle the switch rearward to turn on all the scooters lights (upper and lower front and running lights). WARNING! Scooter users are required to use their lights when visibility is restricted—day or night. Throttle Control Lever This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximu
