Résumé du contenu de la page N° 1
Quick Start Guide
®
SE450
LabelWriter
Professional Label Printer for Serial and USB Connections
Résumé du contenu de la page N° 2
Copyright © 2010 Sanford, L.P. All rights reserved. Revised 05/10. No part of this document or the software may be reproduced or transmitted in any form or by any means, or translated into another language without the prior written consent of Sanford, L.P. Trademarks DYMO, LabelWriter, and DYMO Label are trademarks or registered trademarks of Sanford, L.P. All other trademarks are the property of their respective holders.
Résumé du contenu de la page N° 3
Quick Start Guide This Quick Start Guide gives instructions for connecting the printer, installing the software, and loading the labels. For complete information about programming and using the LabelWriter SE450 printer, refer to the LabelWriter SE450 Technical Reference Guide available on the Developers Program page of the DYMO Web site (www.dymo.com). The LabelWriter SE450 label printer is primarily intended for applications limited to sending simple ASCII print data and Escape commands fo
Résumé du contenu de la page N° 4
S/N 00000-0000000 Become familiar with the printer’s major components. See Figure 2. Top cover Label roll Serial connector Label spool USB USB 10101 24VDC connector DC power connector Cable channel Label release Serial number Form-feed button and status light Label feed path and tear bar Figure 2 LabelWriter Printer Features Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the printer uses heat from a thermal print head to print on specially treate
Résumé du contenu de la page N° 5
Installing as a Serial ASCII Printer (Windows) 1 Plug the end of the serial cable with the RJ11 connector into the serial port on the bottom of the printer. See 10101 24VDC Figure 3. USB 10101 24VDC 2 Connect the 9-pin serial connector to an available serial port on your computer or device, as appropriate. 3 Plug the power cord into the power adapter. 4 Plug the power adapter into the power connector on the bottom of the printer. 5 Insert the cables through the cable channel. 6 When all t
Résumé du contenu de la page N° 6
Installing as a USB Connected Printer The LabelWriter SE450 printer includes DYMO Label v.8 label printing software. You can choose to install the DYMO Label v.8 software or only the LabelWriter SE450 printer drivers depending on how you plan to use the printer. Printer drivers for Windows and Mac are installed from the CD. For those familiar with Linux or CUPS, the CUPS SDK, including the printer drivers, is included on the Software CD. Installing the Software Do not connect the printer to
Résumé du contenu de la page N° 7
3 Do one of the following: • For Windows: Click Install and follow the instructions in the installer. • For Mac OS: Double-click the Installer icon and follow the instructions. 4 When prompted, connect the printer to your computer. See “Connecting the Printer”. Mac OS If the printer is not in the printer list when the installation is complete, refer to the ReadMe file for instructions on how to add the printer. Connecting the Printer 24VDC USB 1 Plug the USB cable into the USB port on the bott
Résumé du contenu de la page N° 8
Loading Labels Important! In order for the labels to feed properly during printing, the labels must be loaded with the left edge of the label inserted against the left edge of the label feed slot. See Figure 8. To load a label roll 1 Press the form-feed button to eject the labels that Spool Spool spindle guide protected the printer during shipment. 2 Open the top cover and remove any packing material inside the label compartment. 3 Remove the label spool from inside the top cover and pull t
Résumé du contenu de la page N° 9
6 Insert the label spool into the slot in the printer cover with the labels extending from underneath the roll. See Figure 7. 7 Align the left edge of the label with the left edge of the label feed slot and insert the label into the slot. The printer automatically feeds the label, stopping at the beginning of the first label. Align labels against left edge If the printer does not feed the labels, make sure the first label is fully inserted and then press the form-feed button on the front
Résumé du contenu de la page N° 10
More Information For more information about programming and using the LabelWriter SE450 printer, refer to the following resources: LabelWriter Printer User Guide Complete information for using and caring for LabelWriter 450 series label printers, including the LabelWriter SE450 printer. This user guide is located on the software CD or it can be viewed from the Help menu in DYMO Label v.8 software. LabelWriter SE450 Technical Reference Guide Complete information for integrating label printing
Résumé du contenu de la page N° 11
Résumé du contenu de la page N° 12
Distributed by: DYMO, Atlanta, GA 30328 800-426-7827: www.dymo.com © 2010 Sanford, L.P. 1771221 05/10 10-0938
