Instruction d'utilisation Kompernass PFLK15

Résumé du contenu de la page N° 1

PFLK 15
2003

Résumé du contenu de la page N° 2

Résumé du contenu de la page N° 3

Résumé du contenu de la page N° 4

SOLDERING PENCIL PFLK 15 For soldering electronic components and circuit boards TECHNICAL INFORMATION Electricity supply: 230 V ~ Power consumption: 15 W Frequency: 50 Hz max. soldering tip temperature: approx. 300° C BEFORE USING FOR THE FIRST TIME
Please read the safety advice for electric tools in the section on "Safe operation".
Before using the tool for the first time check that your mains voltage agrees with that on the rating plate.
Before heating the tool check that the soldering

Résumé du contenu de la page N° 5

RANGE OF USE The PARKSIDE soldering pencil PFLK 15, with its nominal 15 watt power rating, is ideal for soldering electronic components and circuit boards. The nominal soldering tip temperature is about 320° C. For best results use electronics solder 1.0 (10 g included with the soldering pencil) or 1.5 mm dia. 60 % Sn. We recommend soldering paste (not soldering grease or soldering fluid) as a flux. The design of the soldering pencil makes it especially suitable for use where access is diffic

Résumé du contenu de la page N° 6

11. Wear eye protection, protective mask and ear defenders. For work which produces splinters, swarf or dust or when working overhead always wear eye protection, with an appropriate protective mask. When working in noisy conditions, wear ear defenders. 12. Connect the dust suction device. If devices for the connection of dust suction equipment and collectors are available, ensure that these are connected and properly used. 13. Use cable only for such purposes for which it is intended. Never

Résumé du contenu de la page N° 7

24. Take care when working from ladders and scaffolds. Special care must to be taken when working from ladders or scaffolds. Make sure they are correctly assembled and secured against slipping. 25. Attention! Only use such accessories and auxiliaries that are listed in the operating instructions. Use of replacement tools other than those stipulated in the operating instructions or other accessories may entail the risk of injury for operator. 26. Have your power tool repaired by a professional e

Résumé du contenu de la page N° 8

Warranty This piece of equipment is covered by a 36-month warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase (if available) to the closest service address.
Damage caused due to improper handling as well as regular wear of the parts are not covered by this warranty. Beave

Résumé du contenu de la page N° 9