Résumé du contenu de la page N° 1
“TEA CUP”
AM / FM CLOCK RADIO
with NIGHT LIGHT
OWNER'S MANUAL
GP815
Visit our web site at www.emersonradio.com
GP815_ib082003.p65 14 20/8/2003, 11:43
Résumé du contenu de la page N° 2
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- The exclamation point within WARNING: TO REDUCE THE head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
Résumé du contenu de la page N° 3
Thank you for purchasing the Girlpower AM/FM Clock Radio with Sure-Alarm from Emerson. This unique product has been designed to provide you with many years of exceptional performance with a minimum of care and maintenance. The Sure-Alarm battery back up system will remember the time and alarm settings of course, but it can do more than that. As long as there is a fresh 9-volt battery installed, the Sure-Alarm system will operate the radio or buzzer alarm to wake you up even if the power is off a
Résumé du contenu de la page N° 4
IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close heat radiating appliances such as electric heaters. • Dusty places. • Places subject to constant vibration. • Humid or moist places. POWER SOURCE This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio should be connec
Résumé du contenu de la page N° 5
PREPARATION FOR USE UNPACKING AND SET UP • Remove the clock radio from the carton and remove all packing material from the clock radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit. • Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels o
Résumé du contenu de la page N° 6
To install the battery: • Open the battery compartment cover on the bottom of the radio by pressing the tab in the direction of the arrow. • Connect the 9-volt battery to the battery terminal. It can only be connected one way. • Push the battery into the battery compartment and replace the cover. POWER FAILURE INDICATOR If no battery is installed in the radio, or if the battery in the compartment is weak or dead, the time and alarm settings will be lost if the power is interrupted. When th
Résumé du contenu de la page N° 7
LOCATION OF CONTROLS AND INDICATORS 1 2 3 6 4 5 11 12 1314 15 10 9 16 8 17 7 18 1.) Night Light. 9.) SLEEP Button. 2.) AM Indicator. 10.) TIME Adjustment Button. 3.) ALM (Alarm) ‘ On’ Indicator. 11.) LIGHT (ON/OFF) Switch. 4.) Time LED Display. 12.) HOUR Button. 5.) Battery Compartment. 13.) Speaker. (At rear cabinet) (At bottom of cabinet) 14.) MIN. (Minute) Button. 6.) AC Power Cord. 15.) VOLUME Control. 7.) ALARM Selector Switch. 16.) TUNING Control. (OFF/ON/AUTO/BUZZER) 17.) BAND (AM/FM) Se
Résumé du contenu de la page N° 8
OPERATING INSTRUCTIONS SETTING THE CLOCK When you connect the radio to your AC outlet for the first time the clock display will begin flashing “12:00” . The flashing will stop when you set the time. 1.) Depress the TIME button and the HOUR button to set the correct Hour. 2.) Depress the TIME button and the MIN button to set the correct Minute. AM indicator ALM indicator NOTE: Be sure to observe the AM indicator to make sure that the time is set correctly for AM or PM. If the AM indicator is ‘ On
Résumé du contenu de la page N° 9
LISTENING TO THE RADIO 1.) Set the BAND selector to the desired band, AM or FM. 2.) Set the VOLUME control to a low setting. 3.) Slide the ALARM switch to the ON position. 4.) Select your desired station with the TUNING control. 5.) Adjust the VOLUME control to the desired setting. 6.) When you are finished listening, slide the ALARM selector to OFF position to turn the radio ‘ Off’ . ANTENNA INFORMATION AM – The AM bar antenna is inside the cabinet. If AM reception is weak, change the position
Résumé du contenu de la page N° 10
WAKE TO RADIO 1.) Slide the ALARM selector to ON and select the band, station, and volume level that you wish to hear when the alarm comes ‘ On’ , then slide the ALARM selector to AUTO position. 2.) Reconfirm the wake up time settings by pressing the ALARM/RESET button. 3.) At the selected wake up time the radio will turn ‘ On’ . It will play for one hour and then shut off automatically. 4.) To stop the radio sooner, press ALARM/RESET button. The radio will stop but the alarm remains set and wil
Résumé du contenu de la page N° 11
SLEEP TO MUSIC TIMER You can program the sleep timer to play the radio for up to 1 hour 59 minutes and then shut off automatically. Note: The sleep timer can be activated when the ALARM switch is set to the 'OFF', 'AUTO', or 'BUZZER' positions. 1.) Press the SLEEP button. The display will briefly show “0: 59”. While holding the SLEEP button press the HOUR button, the display shows “1: 59” and the radio will begin to play. After 1 hour 59 minutes the radio will shut off automatically. 2.) To adju
Résumé du contenu de la page N° 12
CARE AND MAINTENANCE There are no user serviceable parts inside this clock radio. Please refer all service problems to a qualified service facility. See the Warranty page of this manual for further details. If the cabinet becomes dusty, wipe the exterior with a soft dust cloth only. Never use dusting sprays or polishes on the cabinet. If the cabinet becomes dirty or smudged with fingerprints it may be wiped with a soft cloth that has been slightly dampened with a mild soap and water solution. Al
Résumé du contenu de la page N° 13
LIMITED WARRANTY Emerson Radio Corp. warrants manufacturing defects in original material, including original parts and workmanship, under normal use and conditions, for a period of ninety (90) days from the date of original purchase in the U.S. With your dated proof of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace the product in our discretion. For repair or replacement, pack your unit in a padded box, enclose your c
Résumé du contenu de la page N° 14
BY EMERSON Part No. : 21-2052 308-02 Printed in China GP815_ib082003.p65 13 20/8/2003, 11:43
