Résumé du contenu de la page N° 1
This booklet contains the information you need to get the most from your musical
M&S SYSTEMS
intercom system. It also tells you what to do if your system develops operating
problems, and contains applicable statements of warranty. Keep this booklet for
Model MC602
future reference.
Master Unit
Owner's Guide
Résumé du contenu de la page N° 2
CONTENTS MC602 FEATURES MC602 Features ..................................................... 1 Congratulations! Your new Model MC602 is a state of the art Music Center that provides Hands Free Room to Room communication throughout your house as well MC602 Master Unit Operation .......................................... 2 as furnishing AM, FM, or auxiliary source audio. An optional door chime can be Setting Time ................................................. 4 integrated into the system to p
Résumé du contenu de la page N° 3
In addition, your new musical intercom also features: information is explained under the function with which it is associated. *Smart Chime which will not interfere with Door Communications 3. POWER button - This button is used to turn the MC602 ON and OFF. When *Lightning, static, and surge protection the unit is turned on, one of the four source indicators (AM, FM, AUX, or TAPE) on the *Improved reliability and serviceability right side of the display will be SHOWN. When the unit is of
Résumé du contenu de la page N° 4
minutes. 5. TIME SET button - This button is used to access the time setting mode. When the TIME SET button is pressed momentarily, the display will indicate "SET TIME" and the current time will be displayed with the hours flashing. The UP and 6. SOURCE button - active only when the MC602 is ON. This button is used DOWN buttons (either TUNING UP and DOWN or VOLUME UP and DOWN) can then to select the audio source (FM A, FM B, AM A, AM B, AUX input, or TAPE input) be used to increment or decrem
Résumé du contenu de la page N° 5
The TUNING DOWN button is also used to decrement the time when the unit increased, the display will show the level of this volume with a number from 1 is in the SET TIME, SET AUTO ON TIME, or SET AUTO OFF TIME mode as (minimum volume) to 32 (maximum volume). described under the TIME SET button. Each Room Speaker including the MASTER SPEAKER has its own volume control 8. TUNING UP button - active only when the MC602 is ON and the FM or AM which can be used to turn down the audio level for each pa
Résumé du contenu de la page N° 6
The function is turned on by pushing both the VOLUME UP and VOLUME DOWN buttons at the same time and holding them for 4 seconds. NOTE: When communicating with the person at the door(s), both sides of the conversation will be heard at each speaker that is in the RAD/INT, or INT position 10 & 11. OPTIONAL SECURITY INTERFACE - always active. If the system is (See section 18). connected with a SECURITY system the VOLUME UP button and VOLUME DOWN button are used to activate the panic alarm. The p
Résumé du contenu de la page N° 7
There are four positions for each of these switches. from the speaker being monitored. See Appendix A for details on changing the monitor override configuration. INTERCOM - A speaker with its switch set in the INTERCOM position will hear all intercom communications (including the chime, if Your MC602 may be equipped with either a 3-note or an 8-note Door Chime. This used), but will not hear the audio sources (FM, AM, AUX, optional chime rings through the Master speaker or any room speaker and
Résumé du contenu de la page N° 8
21. ROOM LISTEN button - always active. This button is used for listening to the other rooms and the master. To listen to other rooms and the master hold the MC602 ROOM SPEAKER OPERATION ROOM LISTEN button in. Release the ROOM LISTEN button when you are finished listening. NOTE: To get the maximum benefit from this Hands Free system, make it a house rule that whoever initiates a call will always follow up by pressing the ROOM LISTEN button. This allows someone to respond to the call witho
Résumé du contenu de la page N° 9
OPTIONAL 23 & 24. OPTIONAL HOME AUTOMATION INTERFACE - always active. If the system is connected with a HOME AUTOMATION system the VOLUME UP button REMOTE SCAN and VOLUME DOWN button are used to activate (turn on) the automated function. SPEAKER OPERATION The function is turned on by pushing both the VOLUME UP and VOLUME DOWN buttons at the same time and holding them for 4 seconds. 23. MUSIC VOLUME UP/ON button - always active. This button is used to increase the audio level (volume) of the
Résumé du contenu de la page N° 10
to FM. OPTIONAL HAND HELD 2. UP button - active only when the MC602 is ON and the FM or AM source RF REMOTE CONTROL is selected. This button is used to scan up through the FM or AM memory presets. To go up to the next preset, the UP button is simply pressed momentarily. The MC602 PROGRAMMING - Upon initial power up of the MC602 or upon applying power will tune in the next preset station (the sequence is A1, A2, A3, A4, B1, B2, B3, B4, after the unit loses its memory (power outages greater than
Résumé du contenu de la page N° 11
VOLUME buttons on the MCTX HAND HELD CONTROLLER for the proper listening MC602 TROUBLESHOOTING TIPS volume (this is really setting the maximum listening volume). The individual music speaker volume control can then be adjusted in rooms which require less volume. Problem What to Check ADVANCED FEATURES _____________________________________________________________ No FM or 1. Power turned on (Section 3) APPENDIX A - Monitor Override AM reception 2. Proper Source selected (Section 6) 3. Speaker Sw
Résumé du contenu de la page N° 12
STATEMENTS OF WARRANTY M&S SYSTEMS Limited 2-Year No-Fault Product Warranty M&S SYSTEMS warrants for 2 years all products to be free of defects (M&S SYSTEMS honors the 10-Year No-Fault warranty for AirVac Gold power units. See section below). The warranty period begins from either (1) the date of “first user” purchase of this product or (2) the first close of escrow date on a residence in which this new product was originally installed. This warranty extends to the original user of the product a
