Résumé du contenu de la page N° 1
¨
Model No. NTBE04990
Serial No.
Write the serial number in the space
above for reference.
USERÕS MANUAL
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that
there are missing parts, we will
guarantee you complete satis-
faction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL
DIRECT TO OUR TOLL-FREE
CUSTOMER HOT LINE. The
trained technicians on our cus-
tomer
Résumé du contenu de la page N° 2
¨ Table of Contents Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Part Identification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Ass
Résumé du contenu de la page N° 3
Important Precautions WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the weight system. 1. Read all instructions in this manual before a barbell and weights (not included). Do not using the weight system. Use the weight sys- place more than 310 pounds, including the tem only as described in this manual. barbell, on the weight gliders and safety spotters. 2. It is the responsibility of the owner to ensure that all users of the weight system
Résumé du contenu de la page N° 4
Before You Begin ¨ Thank you for selecting the versatile NordicTrack you have additional questions, please call our Customer GRT270 weight system. Whether your goal is a shape- Service Department toll-free at 1-888-825-2588, ly figure, dramatic muscle size and strength, or a Monday through Friday, 6 a.m. until 6 p.m. Mountain healthier cardiovascular system, the NordicTrack Time (excluding holidays). To help us assist you, GRT270 will help you achieve the specific results you please note the pro
Résumé du contenu de la page N° 5
R1299A Part Identification ChartÑModel No. NTBE04990 M8 Nylon Locknut (37)Ñ12 M8 Washer (35)Ñ10 M10 Washer (3)Ñ8 M10 Nylon Locknut (7)Ñ16 M8 x 25mm Screw (36)Ñ2 M8 x 70mm Bolt (25)Ñ4 M10 x 25mm Bolt (27)Ñ2 M8 x 65mm Carriage Bolt (38)Ñ4 M10 x 65mm Carriage Bolt (24)Ñ4 M8 x 60mm Bolt (23)Ñ2 M10 x 65mm Bolt (26)Ñ4 M8 x 30mm Bolt (22)Ñ2 M10 x 70mm Bolt (29)Ñ8 M8 x 16mm Screw (33)Ñ2 5
Résumé du contenu de la page N° 6
Assembly Before beginning assembly, carefully read the Note: Some small parts may be pre-assem- following information and instructions: bled. ¥ As you assemble the weight system, make sure Make Things Easier for Yourself! all parts are oriented as shown in the drawings. This manual is designed to ensure that the weight bench can be assembled successfully Assembly requires the included allen wrench by anyone. By setting aside plenty of time, and and the following tools (not included): by decid
Résumé du contenu de la page N° 7
3. Slide a Brace (2) onto the bracket on one of the 3 Uprights (1). Attach the Brace to the Upright with two M10 x 65mm Bolts (26), four M10 Washers (3), and two M10 Nylon Locknuts (7). Do not tighten the Nylon Locknuts yet. 1 Slide the Upright (1) and the Brace (2) onto the M10 x 65mm Carriage Bolts (24) and the M8 x 65mm Carriage Bolts (38) in the left Base (4). Attach the 7 Upright with two M10 Nylon Locknuts (7). Attach the 3 Brace with two M8 Washers (35) and two M8 Nylon Locknuts (37). Do
Résumé du contenu de la page N° 8
5. Press a 25mm Round Cap (34) into the end of a 5 Weight Storage Tube (13). 2 While a second person holds the Middle Crossbar (5) in the position shown, insert two M10 x 70mm Bolts 5 (29) through the bracket on the Weight Storage Tube (13), through the left Brace (2), and through the 13 bracket on the Middle Crossbar (5). Thread an M10 29 Nylon Locknut (7) onto each Bolt. Do not tighten the 7 Nylon Locknuts yet. 29 34 6. Press a 25mm Round Cap (34) into the end of the 6 34 29 other Weight Stora
Résumé du contenu de la page N° 9
8. Press a 25mm Bushing (31) into each end of the 8 Locking Bar (20). Insert the Barbell (21) through the Locking Bar (20) until the Barbell is centered in the Locking Bar. 31 20 21 31 9. Identify the Left Weight Glider (18) by looking at the 9 position of the round tube. Press a 38mm Bushing (16) into each end of the round tube on the Left Weight Glider (18). 18 16 Slide the Left Weight Glider (18) onto the left end of 21 33 the Barbell (21). Secure the Weight Glider to the Barbell with a hand
Résumé du contenu de la page N° 10
12. Place the Right Safety Spotter (14) on the right Base 12 (4) and center it over the indicated hole. Note: The 11 handle must point toward the center of the bench. Have a second person hold the Locking Bar (20) so that the Right Weight Glider (17) rests on top of the 1 17 Right Safety Spotter (14). Insert a Weight Guide (11) into the Right Weight Glider, the Right Safety Spotter, and the hole in the Base (4). Note: Tilt the Weight 20 Guide away from the Upright (1) as you insert it. 14 Handle
Résumé du contenu de la page N° 11
Adjusting the Weight System This section explains how the weight system is adjusted. See the included exercise guide for important informa- tion about how to perform a variety of exercises and how to get the greatest benefit from your exercise program. Inspect and tighten all parts each time you use the weight system. Replace any worn parts immediately. The weight system can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents. USING THE LOCKING BAR AND SAFETY SP
Résumé du contenu de la page N° 12
R1299A Part ListÑModel No. NTBE04990 Key No. Qty. Description Key No. Qty. Description 1 2 Upright 24 4 M10 x 65mm Carriage Bolt 2 2 Brace 25 4 M8 x 70mm Bolt 3 8 M10 Washer 26 4 M10 x 65mm Bolt 4 2 Base 27 2 M10 x 25mm Bolt 5 1 Middle Crossbar 28 2 Large Washer 6 1 Top Crossbar 29 8 M10 x 70mm Bolt 7 16 M10 Nylon Locknut 30 2 50mm Bushing 8 2 Large Support Plate 31 2 25mm Bushing 9 2 Small Support Plate 32 8 45mm x 45mm Bushing 10 4 50mm Square Outer
Résumé du contenu de la page N° 13
R1299A Exploded DrawingÑModel No. NTBE04990 35 22 22 29 9 35 9 7 1 11 6 29 34 29 7 1 7 13 29 26 2 7 3 3 5 13 3 7 26 29 3 7 2 37 7 37 8 37 35 34 35 25 37 12 7 10 11 30 7 32 27 32 23 33 4 28 18 33 38 35 35 19 16 10 17 37 10 24 31 16 32 32 37 37 20 16 21 41 8 32 42 4 32 15 14 37 36 36 35 19 32 32 25 38 35 39 40 10 28 27 31 24 23 30
Résumé du contenu de la page N° 14
Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: ¥ The MODEL NUMBER of the product (NTBE04990) ¨ ¥ The NAME of the product (NordicTrack GRT270 weight system) ¥ The SERIAL NUMBER of the product (see the front cover of this manual) ¥ The KEY NUMBER
