Instruction d'utilisation Rowenta Travel

Résumé du contenu de la page N° 1

Latitude Travel Iron
Instructions for Use
Latitu
de

Résumé du contenu de la page N° 2

IMPORTANT SAFETY INSTRUCTIONS When using your iron, basic safety precautions should always be followed, including the following: Read all instructions before using the iron. 1. Use iron only for its intended use. 2. To protect against a risk of electric shock, do not immerse the iron in water or other liquids. Do not use the appliance in a wet environment (on wet floor, near a sink) 3. The iron should always be turned to Minimum (Min) before plugging or unplugging from outlet. Never yank c

Résumé du contenu de la page N° 3

SPECIAL INSTRUCTIONS 1. This is a 1000 watt appliance. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. 2. If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it can not be pulled or tripped over. 3. After the iron has cooled, wrap the cord loosely around the handle. 4. Your Rowenta appliance is intended for household use only. SAV

Résumé du contenu de la page N° 4

A BC D E F G 24 0 V H 120 V Description: A Burst of steam button B Water Filling Inlet C Steam control D Temperature control E Water tank F Handle release G Voltage Selector H Soleplate 4 Latitu de

Résumé du contenu de la page N° 5

BEFORE USE
Please read the instructions for use and the Important Safeguards carefully. Remove the soleplate sticker or transparent soleplate protector.

It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly disappear. FOLDING HANDLE The handle should be in the upright position while the iron is in use. To lock the handle in the upright position, lift the handle and it will automatically lock. To fold handle , press handle release but

Résumé du contenu de la page N° 6

Adding water If you need to add water during ironing.
UNPLUG the iron and repeat filling water steps.
Ensure iron is fully reheated after filling before ironing.
To avoid damage to clothes from dust or dirt that may collect in the iron, we recommend that for the first use or after the iron has been stored for some time that you first iron an old cloth, testing both the steam and burst of steam feature. SELECTING THE TEMPERATURE Set the temperature control according to max the type of f

Résumé du contenu de la page N° 7

Latitu BURST OF STEAM
To remove stubborn wrinkles or press in a sharp crease, use the burst of steam button.
Press the button firmly, a strong burst of steam penetrates deep into the fabric.
Leave an interval of at least four seconds between pressing the burst of steam button.
The burst of steam button can be used as soon as the steam ironing temperature has been reached ( ). VERTICAL STEAM The iron can also be used vertically. This is especially useful for getting creases out of han

Résumé du contenu de la page N° 8

AFTER IRONING
Unplug the iron. Slide the steam control forward to the no steam position and empty any water left in the tank. Leave the iron to cool down. Important: Always empty the water tank when you have finished ironing. After the iron has cooled down, it may be stored in the bag
provided. WATER TO USE IN ROWENTA IRONS Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing h

Résumé du contenu de la page N° 9

CLEANING AND MAINTENANCE
When cold and unplugged, the iron can be cleaned with a damp cloth and wiped dry. Never use household cleaners or solvents. Cleaning the soleplate Rowenta soleplates have excellent non-stick properties and can be simply wiped clean when cold.
In normal use a draggy coating may build up on the soleplate (starch, detergent buildup, burnt synthetic fibers). This can be easily removed by using the Rowenta Soleplate Cleaning Kit or a quality hot iron soleplate cleaner