Résumé du contenu de la page N° 1
OPERATOR'S MANUAL
18 VOLT CORDLESS
RECIPROCATING SAW
MODEL NO. RJC181
SPECIFICATIONS:
Length of Stroke 7/8 in. (22 mm)
Strokes Per Minute 0-3,000 SPM
Motor 18 Volt DC
Switch Variable Speed With Brake
Charger Rating 120 Volts, 60 Hz, AC
Charger Rate 1 Hour
Net Weight 6.16 lbs. (2.8 kg.)
THANK YOU FOR BUYING A RYOBI CORDLESS RECIPROCATING SAW.
Your new cordless reciprocating saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease
of operation, and operator safety.
Résumé du contenu de la page N° 2
TABLE OF CONTENTS ■ General Safety Rules .............................................................................................................................................. 2-3 ■ Specific Safety Rules.................................................................................................................................................. 3 ■ Important Safety Instructions For Charger ................................................................................................
Résumé du contenu de la page N° 3
GENERAL SAFETY RULES Tool Use and Care ■ Use clamps or other practical way to secure and sup- ■ Maintain tools with care. Keep cutting tools sharp and port the workpiece to a stable platform. Holding the clean. Properly maintained tools with sharp cutting edges work by hand or against your body is unstable and may are less likely to bind and are easier to control. lead to loss of control. ■ Check for misalignment or binding of moving parts, ■ Do not force tool. Use the correct tool for your appl
Résumé du contenu de la page N° 4
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER ■ Do not operate charger with a damaged cord or plug. WARNING: If damaged, have replaced immediately by a qualified serviceman. Following this rule will reduce the risk of Never use a battery that has been dropped or received a electric shock, fire, or serious personal injury. sharp blow. A damaged battery is subject to explosion. ■ Do not operate charger if it has received a sharp blow, Properly dispose of a dropped battery immediately. Failure been dro
Résumé du contenu de la page N° 5
SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes Time Alternating Current Type or a characteristic of current --- Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load 0 ...
Résumé du contenu de la page N° 6
FEATURES KNOW YOUR RECIPROCATING SAW LOCK-OFF BUTTON See Figure 1. Your saw is equipped with a "lock-off" button which reduces Before attempting to use your reciprocating saw, familiarize the possibility of accidental starting. The lock-off button is yourself with all operating features and safety requirements. located on the handle above the switch trigger. You must depress the lock-off button in order to pull the switch trigger. The lock resets each time the trigger is released. Note: You WARN
Résumé du contenu de la page N° 7
FEATURES DEPRESS HERE TO PULL SWITCH TRIGGER LOCK-OFF BUTTON LOCK-OFF BUTTON BASE (SHOE) ASSEMBLY SAW BLADE SWITCH TRIGGER BLADE CLAMP LOCK / RELEASE LEVER BATTERY PACK Fig. 1 Page 7
Résumé du contenu de la page N° 8
ASSEMBLY TO INSTALL SAW BLADE See Figure 3. WARNING: ■ Remove battery pack. See Figure 2. Always remove battery pack from your saw when you are assembling parts, making adjustments, assembling WARNING: or removing blades, cleaning, or when not in use. Removing battery pack will prevent accidental starting Failure to remove battery pack from saw could result in that could cause serious personal injury. accidental starting causing possible serious personal injury. TO REMOVE / ATTACH BATTERY PACK S
Résumé du contenu de la page N° 9
OPERATION LED FUNCTION OF CHARGER See Figure 4. GREEN LIGHT "ON" BATTERY INDICATES FULLY LED WILL BE LIGHTED TO INDICATE STATUS OF CHARGER CHARGED CHARGER AND BATTERY PACK: ■ Red LED lighted = Fast Charging Mode ■ Green LED lighted = Fully Charged Battery Pack ■ Yellow and Green LED Lighted = Control Charge or Possible Faulty Battery. CHARGING BATTERY PACK The battery pack for this tool has been shipped in a low charge condition to prevent possible problems. Therefore, RED LIGHT "ON" you shou
Résumé du contenu de la page N° 10
OPERATION GENERAL CUTTING See Figure 6. WARNING: Make sure blade does not touch work until motor reaches full speed, since this could cause loss of control resulting in serious injury. With saw blade at full cutting speed, slowly tilt saw downward until tip of blade starts cutting work. After blade penetrates work, tilt saw until blade is perpendicular to the work. METAL CUTTING See Figure 8. Fig. 6 Hold your saw firmly in front of and clearly away from you. Make sure saw blade is clear of any f
Résumé du contenu de la page N° 11
MAINTENANCE DO NOT ABUSE POWER TOOLS. Abusive practices can damage tool as well as workpiece. WARNING: When servicing use only identical Ryobi replacement WARNING: parts. Use of any other parts may create a hazard or cause product damage. Do not attempt to modify this tool or create accessories Avoid using solvents when cleaning plastic parts. Most not recommended for use with this tool. Any such plastics are susceptible to damage from various types of alteration or modification is misuse and co
Résumé du contenu de la page N° 12
OPERATOR'S MANUAL 18 VOLT CORDLESS RECIPROCATING SAW MODEL NO. RJC181 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers. • MODEL NO. AND SERIA
