Résumé du contenu de la page N° 1
OPERATOR’S MANUAL
HEAT GUN
DOUBLE INSULATED
HG300
Your heat gun has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for buying a Ryobi product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Résumé du contenu de la page N° 2
TABLE OF CONTENTS n Introduction ..................................................................................................................................................................... 2 �n Important Safety Instructions ....................................................................................................................................... 3-4 �n Specific Safety Rules......................................................................................................
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS n Avoid accidental starting. Be sure switch is off WARNING: before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on Read and understand all instructions. Failure to follow invites accidents. all instructions listed below may result in electric shock, n Remove adjusting keys or wrenches before turning fire, and/or serious personal injury. the tool on. A wrench or a key that is left attached to a rotating p
Résumé du contenu de la page N° 4
IMPORTANT SAFETY INSTRUCTIONS n When servicing a tool, use only identical replacement SERVICE parts. Follow instructions in the Maintenance section n Tool service must be performed only by qualified of this manual. Use of unauthorized parts or failure to repair personnel. Service or maintenance performed by follow Maintenance Instructions may create a risk of unqualified personnel may result in a risk of injury. shock or injury. SPECIFIC SAFETY RULES n The nozzle of the heat gun becomes very
Résumé du contenu de la page N° 5
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load o Class II Construction Doub
Résumé du contenu de la page N° 6
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Résumé du contenu de la page N° 7
ELECTRICAL DOUBLE INSULATION EXTENSION CORDS Double insulation is a concept in safety in electric power When using a power tool at a considerable distance from tools, which eliminates the need for the usual three- a power source, be sure to use an extension cord that has wire grounded power cord. All exposed metal parts are the capacity to handle the current the tool will draw. An un- isolated from the internal metal motor components with dersized cord will cause a drop in line voltage, result
Résumé du contenu de la page N° 8
FEATURES PRODUCT SPECIFICATIONS Heat Output.............................................................................................................................................. 300˚F/600˚F/1100˚F Input ..................................................................................................................................... 120 V, 60 Hz, AC only, 10 Amps Net Weight..................................................................................................................
Résumé du contenu de la page N° 9
FEATURES KNOW YOUR HEAT GUN POWER CORD See Figure 1. An extra-long 10-foot power cord gives you more freedom of movement and placement flexibility when working with Before attempting to use this product, familiarize yourself your heat gun. with all operating features and safety rules. SCRAPER NOZZLE TEMPERATURE SWITCH A scraper nozzle attachment is provided with your heat gun Your heat gun’s conveniently located switch allows you to to expand its possible uses. select one of three available
Résumé du contenu de la page N° 10
ASSEMBLY UNPACKING WARNING: This product has been shipped completely assembled. If any parts are missing do not operate this tool until the n Carefully remove the tool and any accessories from the missing parts are replaced. Failure to do so could result box. Make sure that all items listed in the packing list are in possible serious personal injury. included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. WARNING: n Do not discard the packing ma
Résumé du contenu de la page N° 11
OPERATION n Work in one room at a time. Furnishings should be re- STARTING/STOPPING THE HEAT GUN moved or placed in the center of the room and covered. See Figure 2. Work areas should be sealed off from the rest of the The heat gun is started by sliding the power switch upward dwelling by sealing doorways with drop cloths. into either the HI, MED, or LO position. To stop, slide the n Children, pregnant or potentially pregnant women, and switch all the way down to the OFF (O) position. nurs
Résumé du contenu de la page N° 12
OPERATION INSTALLING SCRAPER NOZZLE See Figure 4. The scraper nozzle reduces the airflow from a circular area to a wide, narrow line. This nozzle can be used for removing HEAT GUN NOZZLE paint, and for softening and forming acrylic sheets, vinyl floor tiles, linoleum, and laminate surfaces. NOTE: Install or remove attachment only when both the heat gun nozzle and the scraper nozzle are cool. REMOVING THE NOSE CONE See Figure 5. The nose cone helps to limit exposure to the extremely hot nozz
Résumé du contenu de la page N° 13
MAINTENANCE WARNING: WARNING: When servicing, use only identical Ryobi replacement Always unplug the heat gun before performing any type parts. Use of any other parts may create a hazard or of maintenance. Following this rule will reduce the risk cause product damage. of serious personal injury. CLEANING THE HEAT GUN WARNING: The heat gun and nozzle attachment should be kept clean, Always wear safety goggles or safety glasses with side dry, and free of oil or grease. Only a mild soap and da
Résumé du contenu de la page N° 14
OPERATOR’S MANUAL HEAT GUN DOUBLE INSULATED HG300 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers. • MODEL NO. AND SERIAL NO. The model
