Instruction d'utilisation Jura Capresso Xf70

Résumé du contenu de la page N° 1

IMPRESSA XF70
Short operating instructions
Art. 65478 – XF70 GB – 12/2005

Résumé du contenu de la page N° 2

Control elements Control elements 11 22 1. Rotary Switch 2. Illuminated ring 3. ON/OFF key 13 4. Programming key 5. Draw-off key 1 cup 6. Draw-off key 2 cups 7. Maintenance key Rotary Switch 8. Steam pre-selection key 12 9. Display dialog system 10 10. Water tank with carrying handle 11. Filler funnel for pre-ground coffee 13 12. Bean tank cover 13. Aroma preservation cover 8 7 6 5 9 4 3 3 14. Steam/hot water draw-off valve 15. Replaceable 2-stage frothing jet 14 2 16. Replaceable hot wa

Résumé du contenu de la page N° 3

First use Insert filter (first use) Press power switch (I) (on rear) Remove water tank and empty it (1) Fill bean tank Flip up cartridge (1) holder Touch symbol Insert filter cartridge (2) into water tank, applying slight (2) pressure Close cartridge holder (1) (engages audibly) Fill water tank and insert Display text: SPRACHE - DEUTSCH Turn the Rotary Switch until the required language is displayed Hold Rotary Switch down until the display shows FILTER Confirm selected language by

Résumé du contenu de la page N° 4

Cleaning (duration: approx. 15 minutes) Changing the filter Display text: Display text: READY - CLEAN READY - FILTER Touch the maintenance symbol until the display shows NOTE: After having used 50 litres of water or after two months at the EMPTY - TRAY Empty drip and grounds tray and place back into the machine latest, the filter cartridge will be used up. Remove drip tray Touch symbol to switch machine off Place a receptacle (ca. 1 litre) under the coffee spout Touch maintenance

Résumé du contenu de la page N° 5

Decalcifying (duration: approx. 40 minutes) Decalcifying (continuation) Empty drip and grounds tray and place back into machine when Display text: READY - DECALCIFY display prompts you to do so Touch symbol to switch machine off Rinse water tank well, fill with cold, fresh tap water and place it back into the machine Place receptacle under spout Touch maintenance symbol until the display shows Turn tap to position EMPTY - TRAY Turn it back to the initial position when display pr

Résumé du contenu de la page N° 6

Cleaning the 2-stage frothing jet Notes TIP: To ensure perfect operation of the 2-stage frothing jet, we recommend you clean it regularly. Hold the nozzle at the top and at the bottom end or use a 7 mm open-ended spanner Screw the nozzle apart Thoroughly rinse the 3 parts under running water NOTE: The display will not prompt you to clean the 2-stage frothing jet