Instruction d'utilisation Antec PLUS600

Résumé du contenu de la page N° 1

Disclaimer
This manual is intended only as a guide for Antec's Computer Enclosures. For more
User’s Manual
comprehensive instructions on installing your motherboard and peripherals, please refer
to the user's manuals which come with your components and drives.
PLUS600 Series - Mini Tower Case
The Antec TruePower power supply that comes with this case is equipped with TruePower
circuitry which, among other features, allows the power supply fans to be constantly
monitored and controlled. Bas

Résumé du contenu de la page N° 2

Set Up Note: The speed of the fan go as low as 1500 RPM when the temperature is low. At these 1. Take the case out of the box. speeds some motherboards may not be able to detect the fan speed adjustment during the 2. Remove the Styrofoam. boot up stage. Please refer to your motherboard manual for proper fan monitoring set up. 3. Remove the plastic bag. 1. Connect the 20-pin ATX power connector and other power connectors to your 4. Place the case upright with the power supply fan at the back fac

Résumé du contenu de la page N° 3

IDE Cable Connection IEEE1394 (FireWire, I-Link) Connection This is for IDE devices only. There are six wires with connectors coming out from the front mounted IEEE1394 port of After you have connected the devices to the power supply, you need to connect the IDE your case. They consist of 2 sets of twisted pair cables - TPA (Twisted Pair A) and TPB cables between the devices and the motherboard. (Twisted Pair B), a power cable (VP), and a ground cable (VG). 1. Locate and identify the pin-out o