Résumé du contenu de la page N° 1
External Enclosure for
3.5" SATA to USB + eSATA
RX81US-HT35B-BLK
User Manual
Résumé du contenu de la page N° 2
External Enclosure For 3.5” SATA to USB + eSATA User Manual Please read this installation carefully before you use the products. Precaution: If it is a new HDD, needs to processing the disk partition Win98SE and WinME do not recognize NTFS formatted drives, so if you want to use your drive on those platforms, we recommend you to use FAT32 instead. Mac OS does not recognize NTFS formatted drives, to use your device on both platforms, we recommen
Résumé du contenu de la page N° 3
External Enclosure For 3.5” SATA to USB + eSATA User Manual Available Interfaces USB 2.0 + e-SERIAL ATA Protection of DC adapter a. Primary (Input) Protection The input power line will be fused with a fuse 2.0A, 250 VAC. b. Secondary (Output) protection b.1. Over Current (OC) Protection When an internal fault occurs, or an external fault is applied to the power, such that an overload or short circuit is applied to the output, the power will be shutdow
Résumé du contenu de la page N° 4
External Enclosure For 3.5” SATA to USB + eSATA User Manual Package Contents 3.5 inch external enclosure Driver Disk Installation Guide AC adapter USB cable eSATA cable Footstand Screw Kit FEATURE Standard USB 2.0 high speed transfer rate. Support Serial ATA. (USB + e-SATA) Aluminum HDD frame for easy installation. Crystal acrylic casing with blue & green LED illumination. Suitable for all 3.5" SATA HDD. All aluminum, to enhance heat
Résumé du contenu de la page N° 5
External Enclosure For 3.5” SATA to USB + eSATA User Manual Technical Specifications Bus USB v 2.0 / eSATA Interfaces: USB 2.0 = 480 Mbps Data Speeds eSATA = 3.0 Gbps (NCQ Support) Connectors USB B receptacle / eSATA connectors SATA Compliant with SATA I / II with NCQ Standard support LED Power On / Access Power Supply AC Adapter 12V 2A AC Input 100V ~240V full range Dimensions 208 (D)*128 (W)*36(H) mm Weight: 0.84Kg Certification CE 4
Résumé du contenu de la page N° 6
External Enclosure For 3.5” SATA to USB + eSATA User Manual Installation Guide 1. Pull the bottom (as fig.1) to release the HDD tray. 2. Fix the HDD by screws after HDD located with the connecter. 5
Résumé du contenu de la page N° 7
External Enclosure For 3.5” SATA to USB + eSATA User Manual 3. Aims at trail and pull in the tray into external box. 4. After connect USB / SATA and Power cable, HDD will appear the relativity. Attention: Make sure your PCI Host Card is installed correctly If required, update your OS (win 2000 to SP4, Win xp to SP1a) Only one interface at the time can be used (combo model) 6
Résumé du contenu de la page N° 8
External Enclosure For 3.5” SATA to USB + eSATA User Manual Driver Installation: Windows 98SE After plug the external box into, the system will remind you there is a new hardware of USB Storage Adapter add into. Design the driver of the safe path (in the driver), the system will active the installation automatically. After for a while, click "My Computer", USB HDD will appear the relativity on the PC. Windows ME/2000/XP/Vista The system already pro
Résumé du contenu de la page N° 9
External Enclosure For 3.5” SATA to USB + eSATA User Manual The divided partition of the external HDD Win 98SE/ME SYSTEM FDISK is command that doing the divided partition to HDD, The step of how to divided partition from the HDD by using FDISK as follows: Plug the cable of USB into PC, and be sure that the PC has identified HDD. Execute "FDISK" under the model of COMMAND. After enter the FDISK program [If the FDISK program does not work, please res
Résumé du contenu de la page N° 10
External Enclosure For 3.5” SATA to USB + eSATA User Manual Notice: If you want your ENCLOSURE on a Windows as well as on your Mac OS, we recommend you to use a PC to format the drive. Choose FAT32 format and do not change anything on the partition or format on your Mac, otherwise the Windows OS can not be able to recognize the enclosure. To remove the device: For Windows 98SE Users Before you remove your device please wait for “Access LED” on reader stop
Résumé du contenu de la page N° 11
External Enclosure For 3.5” SATA to USB + eSATA User Manual FAQ How to solve it if you can’t use the Mobile Disk under some OS: It doesn’t support any USB device under the WIN95 and NT4 OS, so that can’t use the Mobile Disk. After formatting can PC use in the MAC? If use the Mobile Disk in the PC, can just format directly. If the PC & MAC cannot be in common use, you can use the MACOPEN software (download from the Internet) in the PC, format to the MAC
