Instruction d'utilisation Tripp Lite B130-101-WP

Résumé du contenu de la page N° 1

Owner’s Manual
VGA Over Cat5
Extender Wallplate Kit
Model: B130-101-WP
Safety Information 2
Package Contents 2
Product Features 2-3
Optional Accessories 3
Specifications 3
Features 4
Installation 5
Warranty & Warranty Registration 6
Español 7
Français 13
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Note: Follow these instructions to ensure proper operation and prevent damage
to this device and its connected equipment.
Copyright © 2009 Tripp Lite. All rights reserv

Résumé du contenu de la page N° 2

Safety Information • To reduce the risk of electric shock, do not expose the product to moisture. • Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fire. • Use only recommended accessories to avoid fire, shock or other hazards. • Unplug this product before cleaning. Use a damp cloth for cleaning. Do not use cleaning fluids or aerosols, which could enter the unit and cause damage, fire

Résumé du contenu de la page N° 3

Product Features • Features built-in Equalization and Gain controls to adjust the video image • Supports video resolutions up to 1920x1440 • No drivers required Optional Accessories • P502-Series Monitor Cables with RGB Coax, HD15 Male/Male • N020-01K-GY Cat5e Bulk Stranded Cable, 1000 ft. • N022-01K-GY Cat5e Bulk Solid Cable, 1000 ft. • N222-01K-GY Cat6 Bulk Solid Cable, 1000 ft. Specifications Signal Type VGA, SVGA, XGA, UXGA and WUXGA Video Amplifier Bandwidth 350 Mbps Input DDC Signal

Résumé du contenu de la page N° 4

Features HD15 Female Connector. 1 Source Video-In Port: Local Unit Power LED: This LED illuminates when the external power 2 supply is connected and the unit is receiving power. 3 Local Unit Power Jack: The 12.6V, 3A external power supply plugs in here. 4 110 Punchdown Connector: Connect Cat5/5e/6 cable between the 110 Punchdown Connectors on the local and remote units. 5 Remote Unit Power LED: This LED illuminates when the unit is con- nected to the local unit and receiving power. Adjust

Résumé du contenu de la page N° 5

Installation 1 2 5 6 3 4 Note: You should test to make sure the entire installation works properly before pulling cables through ceiling/walls. 1 Connect the Male end of the included VGA splitter cable to the HD15 port on the source computer. 2 Connect one of the Female connectors on the included VGA splitter cable to the HD15 port on the local unit. (Optional) Connect a local monitor to the remaining Female connector 3 on the included VGA splitter cable. 4 Connect the external power suppl

Résumé du contenu de la page N° 6

Warranty & Warranty Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service cent