Résumé du contenu de la page N° 1
HDMI-C5 Series
User’s Guide
© 2007 Avenview ™ Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise,
Résumé du contenu de la page N° 2
Table of Contents Getting Started ....................................................................................................................................... 3 Key Features ........................................................................................................................................... 3 System Devices and Functions ........................................................................................................... 3 Receiver HDMI-C5-R .........
Résumé du contenu de la page N° 3
Getting Started The HDMI-C5-5 Receiver can receive HDMI signals over Cat 5 / 5e / 6 cable from HDMI-C5 Series Transmitter and Transceivers. The HDMI-C5-R receiver is a cost effective solution for digital signage, public information display, and large scale demonstration, where crystal-clear, high-resolution digital video needs to be shown. Key Features HDMI over Cat 5 / 5e / 6 cable. Video Amplifier Bandwidth: 1.65GHz Maximum distance between HDMI-C5-SR Transceiver and HDMI
Résumé du contenu de la page N° 4
Panel Description Receiver HDMI-C5-R www.avenview.com 4
Résumé du contenu de la page N° 5
www.avenview.com 5
Résumé du contenu de la page N° 6
Installation and Operation HDMI-C5-S Single-Port Transmitter Installation a. First Time Setup: Turn off the HDMI output device and monitors. b. Device Connection: Connect local HDMI monitor (M1) to the “HDMI/M1 OUT” of the transmitter. Take the HDMI cable, plug one end to “HDMI IN” port of transmitter and the other end of the cable to “HDMI OUT” of HDMI output device. Connect the Connect the power adapter to the “DC 5V” and plug it into the power outlet. Installation Diagram of Sy
Résumé du contenu de la page N° 7
e. EQ Adjustment: You can adjust the EQ control to Auto Mode by rotating the EQ control anti-clockwise. The “EQ” and “Auto” LEDs will display blue. If noise or an unstable image is seen on the local HDMI monitor, adjust the EQ control for best image display quality. f. LINK OUT: HDMI signal can be extended/cascaded over “LINK OUT” port by Cat 5 / 5e / 6 cable. The signal can be received by: - HDMI-C5-R: The maximum HDMI distance is: < 30m (100 ft) for 480 / 720p / 1080i or <15m for
Résumé du contenu de la page N° 8
HDMI-C5-SR Transceiver Installation a. Monitor Connection: Connect HDMI monitor’s HDMI cable to Transceiver and turn on the monitor. b. Device Connection: Plug power adapter to HDMI-C5-SR, the “PWR” LED and “M1 LINK” will turn ON. The “LINK IN” LED should turn off since there is no input of video signal from “LINK IN” port. Connection of HDMI Transceiver c. HDMI Cascading: The RJ45 “LINK IN” port is designed to receive the HDMI signal from Transmitter over Cat 5 / 5e / 6 cable. Follo
Résumé du contenu de la page N° 9
d. EQ Adjustment: You can adjust the EQ control to Auto Mode by rotating the EQ control anti-clockwise. The “EQ” and “Auto” LEDs will display blue. After connecting the extender system, if you see dynamic dots or unclear image on the HDMI monitor, adjust the signal on HDMI Transmitter. e. LINK OUT: The function of “LINK OUT” port on Transceiver will act the same as Transmitter’s. It can extend/cascade HDMI signal to HDMI-C5-R, HDMI-C5-SR, HDMI-C5-4, or HDMI-C5-8. Three ways of e
Résumé du contenu de la page N° 10
HDMI-C5-4 / HDMI-C5-8 Multiport Transceiver Installation a. Monitor Connection: Connect HDMI monitor’s HDMI cable to Multi-Port Transceiver’s “HDMI/LOCAL OUT” port and turn the monitor ON. b. Device Connection: Plug power adapter to Multi-Port Transceiver, the Front Panel’s “POWER” LED and “LOCAL LINK” will turn ON. The “ACTIVE” LED will turn ON till Transceiver has received active HDMI signal. Connection of Multi-Port Transceiver c. HDMI Sources: The “HDMI IN” can receive HDMI signal f
Résumé du contenu de la page N° 11
d. EQ Adjustment: You can adjust the EQ control to Auto Mode by rotating the EQ control anti-clockwise. The “EQ” and “Auto” LEDs will display blue. After connecting the extender system, if you see dynamic dots or unclear image on the HDMI monitor, adjust the signal on HDMI Transmitter. e. LINK OUT: The function of “LINK OUT” port on Multi-Port Transceiver is to cascade HDMI signal to one-port HDMI Transceiver or another 4 / 8 port HDMI Transceiver; Two ways of cascading HDMI
Résumé du contenu de la page N° 12
g. Addition System Expansion: The “RJ-45 HDMI OUT” port can also be used as link out port for more system expansions. Selection of Cable for HDMI-C5-Series a. Selection: Most makes and versions of Cat 5/5e/6 cables will work with HDMII-C5-Series. However, since the quality and characteristics of Cat 5/5e/6 cables varies it has been found that some perform better than others. The major factor influencing the transmitting distance is the skew property of the cables. Skew represents the diffe
Résumé du contenu de la page N° 13
f. Connect UTP Cable: Plug one end of the cable to Transmitter’s “LINK IN/OUT” port and the other end to the Transceiver’s RJ45 “LINK IN/OUR” port. The monitor connected to the Transceiver should now display and the “LINK” or “ACTIVE” LED should turn Green to indicate the HDMI signal activation. Adjust the “EQ” control for best quality HDMI display. Installation of Multiple Transceivers and Displays a. Multiple Transceivers: By using additional HDMI-C5-SR Transceivers, it is possible to e
Résumé du contenu de la page N° 14
g. Function Test: After above installation, you will be able to broadcast the HDMI signal to Receiver’s connected monitor. General Troubleshooting Problem Possible Solution Check your current resolution, refresh rate and color depth Screen Defects Appear settings in the Settings and Monitor tabs in your Display Properties dialog. Try adjusting the brightness, sharpness, contrast, and color Off-Center Screen Image, Odd balance controls of your monitor. Colors or No Picture T
Résumé du contenu de la page N° 15
Specifications Model HDMI-C5-R Description 1 Port HDMI Receiver Input HDMI Female x 1 Output RJ45 x 1 With each cascading length: Max Distance < 30m (100ft) @ 480p / 720p / 1080i and Resolution < 15m (50ft) @ 1080p Signal Type HDMI www.avenview.com 15
Résumé du contenu de la page N° 16
www.avenview.com 16
