Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
(DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Yamaha Electronics Corporation, USA. Address: 6660 Orangethorpe Avenue Buena Park, CA 90620 Telephone: 714-522-9105 Fax: 714-670-0108 Type of Equipment: CD Recordable/Rewritable Drive Model Name: CRW3200SX This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that
Résumé du contenu de la page N° 3
Laser Product Class: Class 1 CAUTION Laser Diode Properties Use of controls or adjustments or performance of Wavelength: 780 – 787 nm procedures other than those specified herein may result Pulse Durations and Max. Output in hazardous radiation exposure. at the lens of the Laser Pickup Unit Read Mode: 0.85 mW (Continuous) ACHTUNG Write Mode: Max. 48 mW Halten Sie sich beim Bedienen und Einstellen der (for 212 ns, Min. Cycle 57.9 ns) Bedienungselemente sowie bei der Bedienungsabfolge an
Résumé du contenu de la page N° 4
Résumé du contenu de la page N° 5
OWNER’S MANUAL i English
Résumé du contenu de la page N° 6
SAFETY PRECAUTIONS PLEASE READ THE FOLLOWING WARNINGS AND CAUTIONS CAREFULLY TO PREVENT PERSONAL INJURY AND DAMAGE TO THE DEVICE. These precautions explain how to use the device properly and safely, thereby preventing injury to yourself and others. This section has been sub-divided into a WARNING section and a CAUTION section, according to the likelihood and nature of any potential injuries or damage inflicted. They relate to your personal safety, and also help you prevent the risk of damag
Résumé du contenu de la page N° 7
Clean the AC power plug regularly to avoid the risk of fire due to insulation failure such as humidity. Do not unplug the AC adapter by pulling the cable, and do not place objects on the cable to avoid the risk of electrical shock, fire, or malfunction. Plug in the AC adapter fully to avoid the risk of electrical shock or fire. Do not connect many devices to an electrical outlet. Maintain the rated power of the outlet to avoid the risk of fire due to overheating. CAUTION Always follo
Résumé du contenu de la page N° 8
Do not listen to audio with headphones at high volume for prolonged period to avoid auditory disorder. Prior to turning on the computer, always minimize the volume to avoid auditory disorder by a sudden burst of sound at high volume. Do not place the device near magnets or anything magnetized such as a display to avoid the risk of interferences between each other. Have the device serviced regularly to avoid internal dust buildup that can cause malfunction, damage or fire. For service
Résumé du contenu de la page N° 9
Table of Contents Features of the CRW3200SX Drive................................................ 1 Names and Functions of Parts..................................................... 2 Front Panel...............................................................................................2 Rear Panel................................................................................................3 Precautions on Use.................................................................. 4 Handling Disc
Résumé du contenu de la page N° 10
Features of the CRW3200SX Drive High speed writing/reading The CRW3200SX drive supports up to 24X-speed writing for CD-R discs, and up to 10X-speed writing/rewriting for CD-RW discs. In addition, the drive supports data reading and digital audio data extraction at up to 40X speed. Tip The Partial CAV method permits 24X-speed writing for CD-R discs. The CLV method and the 4X – 10X Full CAV method permit 10X-speed writing/ rewriting for CD-RW discs. SafeBurn™ (Enhanced stability writing tech
Résumé du contenu de la page N° 11
Names and Functions of Parts Front Panel ➀➂ ➁ ➃➄ ➅ ➀ Disc tray ➅ LED Holds the disc. It is opened or closed by Indicates the operational status of the pressing the eject button. (P. 20) CRW3200SX drive by its colors and blinking patterns. ➁ Manual eject hole Lights or blinks blue Forcibly opens the disc tray when the tray Lights: Standby (with disc) cannot be opened by pressing the eject Blinks: Opening/Closing disc tray, or button. (P. 21) reading disc information (TOC) ➂ Eject button
Résumé du contenu de la page N° 12
Names and Functions of Parts Rear Panel ➀ ➁ ➂ ➃➄ ➀ LINE OUT jacks (L/R) ➃ SCSI connectors Connect audio devices such as external Connect the SCSI cable. (P. 12) speakers. D-sub half-pitch 50-pin pin-type is used. (P. 13) ➁ Power switch (STANDBY/ON) ➄ Dip switch Turns the power on/off. (P. 12, 15) Sets the SCSI ID number and the ➂ DC-IN connector terminator. (P. 9) Connects the included AC adapter. (P. 14) 3
Résumé du contenu de la page N° 13
Precautions on Use Handling Discs To avoid trouble, such as writing errors, loss of recorded data, and malfunction of the drive, take the following precautions when handling discs. Do not place discs in a hot or damp place or where they will be exposed to direct sunlight. Do not touch the disc surface. Hold the disc by the edge when handling it. Remove dust and dirt from the disc surface. Use an air spray to remove dust. The disc surface may be scratched if strongly wiped with a dry clo
Résumé du contenu de la page N° 14
Precautions on Use Compatible Discs Discs that can be written on The CRW3200SX drive can write on the following discs. For the latest information about discs previously checked for compatibility with the drive, refer to the following website. YAMAHA CD-R/RW Drive website URL: http://www.yamaha.co.jp/english/product/computer/ CD-R discs The CRW3200SX drive can write at 1X, 2X, 4X, 8X, 12X, 16X or 24X speed. CD-R discs can be played back on a CD-ROM drive or a CD player. Note 24X-speed writ
Résumé du contenu de la page N° 15
Partial CAV (Constant Angular Velocity) The CLV (Constant Linear Velocity) method is generally used to write data on a CD-R disc. In writing using the CLV method, the disc rotation speed is adjusted to keep the data writing speed (data transfer rate) constant on all parts of the disc. In contrast, the CAV (Constant Angular Velocity) method exercises control so as to keep the disc rotation speed constant. Since the CAV method makes it possible to substantially increase the maximum data transf
Résumé du contenu de la page N° 16
Precautions on Use Hard drive space Writing data on a CD-R/RW disc requires 50 MB to 100 MB of free space as a working area on the hard drive. When writing data on a CD-R/RW disc after creating an image file, there must be enough free space on the hard drive to store the image file in addition to the working area (a total of up to 900 MB). However, hard drive space for image files is not required when directly writing onto a CD-R/RW disc from a hard drive or CD-ROM using the CRW3200SX dri
Résumé du contenu de la page N° 17
For Macintosh Computer (Macintosh) CPU: PowerPC G3, 300 MHz or faster RAM: 32 MB (64 MB or more is recommended) CD-ROM drive Note The CRW3200SX drive cannot be used to boot the computer or to set up an operating system. Hard drive space Writing data on a CD-R/RW disc requires 50 MB to 100 MB of free space as a working area on the hard drive. When writing data on a CD-R/RW disc after creating image file, there must be enough free space on the hard drive to store the image file in add
Résumé du contenu de la page N° 18
Preparing the CRW3200SX Drive Serial Number The serial number is printed on the label on the bottom of your CRW3200SX drive. When you have a question about the drive or need user support services, the serial number is required. Please write the serial number down in the space below. It may be difficult to check the serial number after setting up the drive or for any other reason. Serial number (10 characters: 3 letters + 7 numbers) Serial Number 1 Set up the CRW3200SX Drive Prior to connec
Résumé du contenu de la page N° 19
➀➀ SCSI ID Number ➀➀ Each of the SCSI devices connected to the computer needs to be identified by its own SCSI ID number from “0” to “7.” The SCSI ID number “7” is normally reserved for the SCSI card. Therefore, assigning a SCSI ID number from “0” to “6,” except for the ID numbers in use by other SCSI devices, to the CRW3200SX drive is recommended. The dip switch of the CRW3200SX has four switches, and use SW 1, SW 2, and SW 3 (three switches from the left) to set the SCSI ID number. The sw
Résumé du contenu de la page N° 20
Preparing the CRW3200SX Drive ➁➁ Termination ➁➁ A terminator prevents the reflection of SCSI signals at the last device of the SCSI chain. The terminators of the first and last devices of the SCSI chain should be set to ON. If the CRW3200SX drive is not at the last of the SCSI chain, the TERMINATOR (SW 4) of the dip switch should be set to OFF. Computer Extenal SCSI Device (unterminated) CRW3200SX (terminated) SCSI card (terminated) Termination ON (default) Termination OFF OFF OFF ON ON Se
