Résumé du contenu de la page N° 1
SAFETY SYMBOLS
PRECAUTIONS
1. INTRODUCTION
1-1.Features
1-2.Package Contents
1-3.Controls & Connectors
2. CABLE CONNECTION
2-1.Before Connecting
2-2.Connecting the Signal
Cable (D-Sub or DVI)
2-3.Connecting the Signal
Cable (ADC)
2-4.Connecting Two PCs to
the Monitor
2-5.How to install the Hood
2-6.How to remove the Tilt
This manual is checked under the browser settings shown
Stand
below. Text size can change for another one through browser
setting.
3. ScreenManager
3-1.How to use the
Résumé du contenu de la page N° 2
7. TROUBLESHOOTING 8. CLEANING 9. SPECIFICATION 10. GLOSSARY APPENDIX/ ANHANG/ ANNEXE About TCO'03 FCC Declaration of Conformity Hinweis zur Ergonomie/ Recycling Information/ Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Résumé du contenu de la page N° 3
This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2006 EIZO NANAO CORPORATION All rights reserved. No part of this manual may
Résumé du contenu de la page N° 4
PowerManager is a trademark of EIZO NANAO CORPORATION. ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries. ® As an ENERGY STAR Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Product specifications may vary depending on the region. Confirm the specifications in the manual written in the language of the region of purchase.
Résumé du contenu de la page N° 5
IMPORTANT! ● This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. ● To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] If the unit begins to emit smoke, smells like something is b
Résumé du contenu de la page N° 6
Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the
Résumé du contenu de la page N° 7
Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. Power supply: 100-120/200-240 VAC±10 %, 50/60 Hz To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. Use the
Résumé du contenu de la page N° 8
When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely. Do not touch a damaged LCD panel dir
Résumé du contenu de la page N° 9
Do not block the ventilation slots on the cabinet. * Do not place any objects on the ventilation slots. * Do not install the unit in a closed space. * Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage. Do not touch the plug with wet hands. Doing so may result in electrical shock. Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in
Résumé du contenu de la page N° 10
The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels:99.9994%or higher. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints left on the s
Résumé du contenu de la page N° 11
Thank you very much for choosing an EIZO Color Monitor. ● The exclusive use calibration software calibrates the monitor characteristics and generate color profile. ● Dual inputs compliant ● DVI Digital input (TMDS) compliant. ● ADC (Apple Display Connector) inputs compliant. ● [Horizontal scanning frequency] Analog: 24 - 100 kHz Digital: 31 - 100 kHz [Vertical scanning frequency] Analog: 49 - 86 Hz (1600 x 1200: 49 - 76 Hz) Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)) [R
Résumé du contenu de la page N° 12
* LCD Monitor * Calibration software * Power Cord "ColorNavigator"(in the CD-ROM) * Analog Signal Cable (FD-C16) * "ColorNavigator" Quick Referenc * Digital Signal Cable (FD-C39) * Adjustment Certificate * EIZO USB Cable (MD-C93) * LIMITED WARRANTY * Setup Guide * Cleaning kit "ScreenCleaner" * EIZO LCD Utility Disk (CD-ROM) * HOOD * User's Manual (in the CD-ROM) (Top Hood/ Right Hood / Left Hood) * Please retain the packing materials for future transference. * The "ActiveRotationII Utility"
Résumé du contenu de la page N° 13
® (1) ScreenManager (2) Main Power Switch (3) Input Signal Selection Button (4) Auto Adjustment Button (5) Enter Button *1 (6) Control Buttons (Up, Down, Left, Right) (7) Power Button *2 (8) Power Indicator Blue Operation Flashing blue Notify that the monitor needs to be recalibrated in CAL (2 times for each) mode. Yellow Power saving Flashing yellow Power is off (Main power is on) slowly Off Power off *1 Directly pressing the left button or the right button allows you to select a FineContr
Résumé du contenu de la page N° 14
*3 (9) Height Adjustable Stand (Detachable) *4 (10) Security Lock Slot (11) DVI-I Input Connector x 2 (SIGNAL 1 / SIGNAL 2) (12) USB Port (1 Upstream) (13) USB Port (2 Downstreams) (14) Power Connector *3 The LCD monitor has the capability of the Portrait/Landscape display. (The panel pivots in the clockwise direction 90°.) The LCD monitor can be used with an optional arm stand by removing the stand. (see "2-6. How to remove the Tilt Stand"). *4 Allows for connection of a security cable. Th
Résumé du contenu de la page N° 15
Before connecting your monitor to the PC, change the display screen settings (resolution and frequency) in accordance with the APPENDIX charts. * When your computer supports VESA DDC, the suitable resolution and the refresh rate are set by just plugging your monitor into the computer without any manual settings. * Be sure that the power switches of both the PC and the monitor are OFF. 1.Plug the signal cable into the connector at the rear of the monitor and the other end of the cable
Résumé du contenu de la page N° 16
Signal Cable Connector on PC PC Signal Cable (FD-C16 Video Output Standard graphics card enclosed) Connector / D-Sub Macintosh G3 (Blue & mini 15 pin White) /Power Mac G4 (VGA) Input Connector (monitor) / DVI Signal Cable (FD-C16 Video Output Macintosh enclosed) +Adapter* Connector / D-Sub 15 pin Input Connector (monitor) / DVI *Macintosh Adapter (Optional) Digital Input Signal Cable Connector on PC PC Signal Cable (FD-C39 Video Output Digital graphics card enclosed) Connector / DVI P
Résumé du contenu de la page N° 17
* The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/Landscape display. 4.Plug the other end of the power cord into a power outlet. The monitor’s power indicator will flash yellow slowly. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. The equipment must be connected to a grounded m
Résumé du contenu de la page N° 18
5.Turn on the monitor's power button and then switch on the PC's power. The monitor's power indicator will light up (blue). If an image does not appear, refer to the "7. TROUBLESHOOTING" for advice. Whenever finished, turn off the PC and the monitor. * When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen. * Adjust brightness of the screen depending on the brightness of your environment. *
Résumé du contenu de la page N° 19
Signal Cable Connector on PC PC Signal Cable (FD-C39 Video Output Power Mac G4 / G5(ADC) enclosed) +ADC-DVI Connector / ADC display adapter Input Connector (commercially available) (monitor) / DVI * ADC-DVI display adapter is required if the monitor connects to Power Mac G4 / G5. The adapter is commercially available. 2.Plug the power cord into the power connector on the rear of the monitor. 3.Lead the power cord and signal cable into the cable holder at rear of the monitor. * The cable
Résumé du contenu de la page N° 20
