Résumé du contenu de la page N° 1
HP L2045w 20" LCD Monitor
User Guide
Résumé du contenu de la page N° 2
© 2006, 2007 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, o
Résumé du contenu de la page N° 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
Résumé du contenu de la page N° 4
iv About This Guide ENWW
Résumé du contenu de la page N° 5
Table of contents 1 Product Features HP L2045w ........................................................................................................................................... 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 3 Maintenance Guidelines ..........................................................................................................
Résumé du contenu de la page N° 6
Changing the Color Temperature ...................................................................................... 29 Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP .................... 29 Installing the sRGB ICM File for Microsoft Windows Vista ................................................ 29 Appendix A Troubleshooting Solving Common Problems ................................................................................................................ 31 Using t
Résumé du contenu de la page N° 7
1 Product Features HP L2045w The flat panel monitor has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: Large 20.1-inch (51 cm) wide-screen display with 1680 × 1050 resolution, plus full-screen support ● for lower resolutions Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side ● Pivot capability to rotate display to portrait mode ● Tilt, swivel, and height adjustment capabilities ● Grounded alum
Résumé du contenu de la page N° 8
Swedish TCO Requirements ◦ Energy Star ◦ 2 Chapter 1 Product Features ENWW
Résumé du contenu de la page N° 9
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 38 section in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an im
Résumé du contenu de la page N° 10
Turn the monitor off when not in use. You can substantially increase the life expectancy of the ● monitor by using a screen saver program and turning off the monitor when not in use. Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked ● or covered. Never push objects of any kind into cabinet slots or other openings. Do not drop the monitor or place it on an unstable surface. ● Do not allow anything to rest on the power cord. Do not walk on the cord.
Résumé du contenu de la page N° 11
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Rear Components Figure 3-1 Rear Components Component Function 1 USB Downstream Connects optional USB devices to the monitor. Connectors 2 USB Upstream Connects the monitor USB hub to a host USB port/hub. Connector 3 DVI-D Connector Connects the DVI-D signal cable to the monitor. 4 VGA Connector Connects the VGA signa
Résumé du contenu de la page N° 12
The monitor features two sets of VESA 100mm mounting holes. Use the top mounting holes to allow the display head to be lowered 18.05 mm closer to the table surface, when used in landscape mode. Figure 3-2 Two Sets of VESA 100mm Mounting Holes 6 Chapter 3 Setting Up the Monitor ENWW
Résumé du contenu de la page N° 13
Selecting the Signal Connectors and Cables The monitor features one DVI-D connector and one VGA connector capable of supporting either digital or analog input. The video mode is determined by the connector and video cable used. For digital operation, use an optional DVI-D signal cable. Connect the DVI-D signal cable to a DVI- ● D connector on the monitor and the other end to the DVI-D connector on the computer. For analog operation, use the VGA signal cable provided. Connect the VGA signal cable
Résumé du contenu de la page N° 14
Connecting the Monitor 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer or to a USB hub, and the other end to the upstream USB connector on the monitor. Figure 3-5 Connecting the USB Hub Cable (not included with monitor) WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding plug. The grounding plug is an imp
Résumé du contenu de la page N° 15
3. Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 3-6 Connecting the Power Cable 4. Place the cables through the cable management channel on the back of the monitor and on the pedestal base. Figure 3-7 Using the Cable Management Feature ENWW Connecting the Monitor 9
Résumé du contenu de la page N° 16
Adjusting the Monitor 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-8 Tilting the Monitor 2. Swivel the monitor to the left or right for the best viewing angle. Figure 3-9 Swiveling the Monitor 10 Chapter 3 Setting Up the Monitor ENWW
Résumé du contenu de la page N° 17
3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. WARNING! A lock-down/release button on the front of the column prevents the display head from sliding up when the monitor is lifted. If the display head is locked in the lowest height position: a. Make sure that the monitor is safely positioned on a stable surface. b. Gently push down on the display head. c. While pushing down the display head, press the lock-down/release button on the fr
Résumé du contenu de la page N° 18
4. Pivot the monitor from landscape to portrait orientation viewing to adapt to your application. Figure 3-11 Pivoting the Monitor NOTE: The monitor pivots from landscape clockwise to portrait orientation. To view information on the screen in portrait mode, you will need to install the Pivot Pro software included on the software and documentation CD. Turning on the Monitor 1. Press the power switch to turn on the computer. 2. Press the power button on the front of the monitor. CAUTION: Burn-in
Résumé du contenu de la page N° 19
Connecting USB Devices The monitor provides two USB connectors on the rear panel to connect devices such as a digital camera, USB keyboard, or USB mouse. NOTE: You must connect the USB hub cable from the monitor to the computer or to a USB hub to enable the USB 2.0 ports on the monitor. Refer to Step 2 in Connecting the Monitor on page 8. Figure 3-12 Connecting USB Devices Using the Accessory Rails The monitor features accessory rails on the rear that may be used to mount optional devices, such
Résumé du contenu de la page N° 20
Mounting Solutions Removing the Monitor Pedestal Base You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm, or other mounting fixture. CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. If the monitor has a connected audio cable, disconnect it. 1. Disconnect and remove the signal and power cables from the back of the monitor. 2. Lay the monitor face down on a s
