Résumé du contenu de la page N° 1
MITSUBISHI
AUTO-SCANNING WITH DIGITAL CONTROL
COLOR DISPLAY MONITOR
MODEL FFT9905SKHFW
USER'S GUIDE
For future reference, record the serial
number of your display monitor in the
space below:
SERIAL No.
The serial number is located on the
rear cover of the monitor.
Résumé du contenu de la page N° 2
CAUTION The power cord provided with this monitor is designed for safety and must be used with a properly grounded outlet to avoid possible electrical shock. Do not remove the monitor cabinet as this can expose you to very high voltages and other hazards. Trademark IBM, PC, PS/2, PS/V, Personal System/2 are registered trademarks of International Business Machines Corp. Apple Macintosh is a registered trademark of Apple Computer, Inc. Quadra is a trademark of Apple Computer, Inc. UNIX i
Résumé du contenu de la page N° 3
RADIO INTERFERENCE REGULATIONS STATEMENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu
Résumé du contenu de la page N° 4
Congratulations! You have just purchased a TCO'95 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and to the further development of environmentally-adapted electronic products. Why do we have environmentally-labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the
Résumé du contenu de la page N° 5
In and after the middle of this page, you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development Unit S-114 94 Stockholm Sweden Fax: +46 8 782 92 07 E-mail (Internet): development@tco.se Current information regarding TCO'95 approved and labelled products may also be obtained via the Internet, using the address: http//www.tco-info.com/ TCO'95 is a co-operative project between Environmental
Résumé du contenu de la page N° 6
Diamond Scan 90e User’s Guide CONTENTS 1. INTRODUCTION .................................................................................................. 6 1.1 Features ..................................................................................................... 6 1.2 Internal Preset Memory Capability ............................................................. 7 1.3 Power Management Function .................................................................... 7 1.4 DDC ................
Résumé du contenu de la page N° 7
1 INTRODUCTION 1 Congratulations on your purchase of the Diamond Scan 90e high resolution color monitor. Mitsubishi designed this monitor to provide you with years of reliable trouble-free operation. Once again, thank you for selecting our product and welcome to Mitsubishi! This guide tells you how to connect, adjust and care for your Diamond Scan 90e monitor. This guide also provides technical specifications and instructions for troubleshooting any basic problems you may experience with your
Résumé du contenu de la page N° 8
1.2 Internal Preset Memory Capability To minimize adjustment needs, the factory has preset popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected, the picture size and center- ing are automatically adjusted. All of the factory presets may be overwritten by adjusting the user controls. The monitor is capable of automatically storing up to 6 additional display standards. The new display information must differ from any of the existing dis
Résumé du contenu de la page N° 9
1.4 DDC The monitor includes the DDC1 and DDC2B feature. DDC (Display Data Channel) is a communi- cation channel over which the monitor automatically informs the host system about its capabilities (e.g. each supported resolution with its corresponding timing). DDC is routed through previously unused pins of the 15-pin VGA connector. The system will perform "Plug and Play" feature if both, monitor and host, implement the DDC protocol. 1.5 Location Considerations When setting up and using the mon
Résumé du contenu de la page N° 10
M MODEL FFT9905SKHKW ODEL FFT9905SKHKW MITSUBISHI MITSUBISHI D Diamond Scan 90e iamond Scan 90e U User's Guide ser's Guide AD-A205 M TSUB SH I I I ON 1 2 3 4 5 6 1.7 Unpacking After you unpack the box you should have all of the items indicated in Figure 1. Save the box and packing materials in case you ship or transport the monitor. Complete and mail in warranty cards. 1 2 3 4 1. Diamond Scan 90e Color Monitor 5 6 2. AC Power Cord 3. Signal Cable SC-B102
Résumé du contenu de la page N° 11
1.9 Quick Operation Chart To summarize the steps in connecting your computer and adapter with Diamond Scan 90e color monitor and setting the necessary controls and switches, refer to the chart below. Connect the power cord to the Diamond Scan 90e color See 2.1 AC Power Connection monitor and the signal cable between the Diamond 2.2 Signal Cable Connection Scan 90e and the graphics adapter. Turn on the computer. Turn on the Diamond Scan 90e color monitor. See 3. USER CONTROLS Set the controls a
Résumé du contenu de la page N° 12
2 CONNECTING THE MONITOR 2 On the back of the monitor are four plug-in connections: one for the AC power cord, DB9-15P connector, BNC connector for video and a DIN-8P connector for the optional USB-unit. 2.1 AC Power Connection One end of the AC power cord is connected into the AC power connector on the back of the monitor. The other end is plugged into a properly grounded three-prong AC outlet. The monitor’s auto-sensing power supply can automatically respond to the power supply input of
Résumé du contenu de la page N° 13
2.2.2 Connecting to An Apple Macintosh Centris, Quadra, and Apple Macintosh II Family Figure 4 shows the SC-B102 cable and AD-A205 Adapter to the video port in an Apple Macintosh. 1. Power off, both the monitor and the computer. 2. Set the DIP switches of Macintosh Adapter according to the setting chart. (See 7.4 Macintosh Adapter AD-A205 settings) 3. Connect the 15-pin (DB-15P) end of the AD-A205 Adapter to the straight 15-pin connector on the Macintosh video port on the CPU or on the video b
Résumé du contenu de la page N° 14
BNC CONNECTION (1) IN CASE OF A COMPOSITE SYNC ON GREEN VIDEO SIGNAL (SYNC ON GREEN): Connect the R, G and B video signals to the BNC receptacles on the back of the monitor. D-SUB COMP. RG B VD HD Serial (2) IN CASE OF EXTERNAL COMPOSITE SYNC SIGNAL: Connect the R, G and B video signals and the Composite sync signal to BNC receptacles on rear panel, respectively. D-SUB COMP. RG B VD HD Serial (3) IN CASE OF SEPARATE HORIZONTAL AND VERTICAL SYNC SIGNALS: Connect the R, G and B video signals and t
Résumé du contenu de la page N° 15
3 USER CONTROLS 3 3.1 Control Names See Figure 6 and 7 for the location of the following user controls and indicators. Each control is identified by number and is described individually on page 14. FRONT [How to use the front control panel] Press the button marked “ ” on the control panel to open.To close, press it again. 1. POWER SWITCH 2. POWER-ON INDICATOR 4. OSD OFF BUTTON 6. FUNCTION ADJUST BUTTONS BNC/D-SUB OFF BNC/D-SUB OFF ADJUST DEGAUSS ADJUST
Résumé du contenu de la page N° 16
REAR D-SUB COMP. RG B VD HD Serial SIGNAL INPUT CONNECTOR AC POWER CONNECTOR (DB9-15P) 9. DC POWER OUTPUT CONNECTOR D-SUB COMP. RG B VD HD Serial 8. SERIAL INTERFACE CONNECTOR SIGNAL INPUT CONNECTOR (BNC) (DIN-8P) Figure 7 8. SERIAL INTERFACE CONNECTOR: The monitor has a DIN-8P connector for serial interface communication. This connector will be used for optional USB unit. For the information about connecting, please refer to the instruction which is included in each optional kit. For further
Résumé du contenu de la page N° 17
4 OSD(On Screen Display) FUNCTIONS 4 (1) CONTRAST: Adjusts to the desired contrast level. (2) BRIGHTNESS: Adjusts to the black level of the screen. (3) COLOR-TEMPERATURE: Adjusts the color temperature of the screen image. (4) INFORMATION: Indicate current Scanning frequency and input Video signal port (signal connector) (5) H-SIZE (Horizontal Size): Controls the horizontal size of the image on the screen. (6) H-PHASE (Horizontal Position): Controls the horizontal position of the image on
Résumé du contenu de la page N° 18
4.1 Operation Press any select button and control indicators will be superimposed on the display screen called 1st layer. Refer to Figure 6 for the location of the monitor function ( ) controls. Press the select buttons to choose one of the following controls. The indication of a function symbol changes to blue. When selected the function symbol of above OSD, press the adjust button ( or ), the OSD screen changes to following called 2nd layer. Then you can adj
Résumé du contenu de la page N° 19
2 10 6 14 15 3 11 7 1 4 5 8 12 9 13 16 z USB 17 z z 20 CLAMP VIDEO CONT R AS T 18 19 Press the Minus Adjust Button: Press the Plus Adjust Button: Symbol of 1st 2nd OSD layer OSD layer 1 CONTRAST CON T R A S T 9 0% To increase the contrast. To decrease the contrast. Press plus and minus buttons together, to restore LEVEL: 00 - 100% to factory preset level. 2 BRIGHTNESS BR I GH T N E S S 9 0% To decrease the brightness. To increase the brightness. Press plus and minus buttons together, to restore
Résumé du contenu de la page N° 20
Press the Plus Adjust Button: Press the Minus Adjust Button: Symbol of 1st 2nd OSD layer OSD layer 5 H-SIZE H - S I Z E 9 0% To expand the width of To narrow the width of the image on the screen. the image on the screen. LEVEL: 00 - 100% 6 H-PHASE H - P H A S E 9 0% To move the image to To move the image to the left. the right. LEVEL: 00 - 100% 7 V-SIZE V - S I Z E 9 0% To narrow the height of To expand the height of LEVEL: 00 - 100% the image on the screen. the image on the screen. 8 V-POSITION
