Résumé du contenu de la page N° 1
AGX7 0 0
REFERENCE GUIDE
17”COLOR
16” VIEWABLE
MONITOR
BY PRINCETON
Résumé du contenu de la page N° 2
This Page left blank intentionally.
Résumé du contenu de la page N° 3
U S E R ' S M A N U A L I. FCC Compliance Statement 4 A G X 7 0 0 II. Safety Instructions 5 III. Sicherheitshinweise 6 IV. TUV 7 1. Introduction 9 2. Installation 11 3. Controls & Functions 12 4. Timing Guide 16 5. Power Management 17 Appendix A: Specifications 18 Appendix B: Pin Assignment 19 Troubleshooting and Q&A 20 3
Résumé du contenu de la page N° 4
This equipment has been tested and found to comply with the limits for a for compliance could void the user’s authority to operate the equipment. Class B digital device, pursuant to Part 15 of the FCC Rules. These limits If necessary, the user should contact the dealer or an experienced radio/ are designed to provide reasonable protection against radio frequency television technician for additional suggestions. The user may find the interference in a residential installation. This equipment gen
Résumé du contenu de la page N° 5
Read all of these instructions. If an extension cord is used with this product, make sure that the Save these instructions for later use. total of the amperage ratings on the products plugged into the Follow all warnings and instructions marked on the product. extension cord does not exceed the extension cord’s amperage rating. Also, make sure that the total of all products plugged into Unplug this product from the wall outlet before cleaning. Do not use the wall outlet does not exceed 15 ampere
Résumé du contenu de la page N° 6
Lesen Sie sich die folgenden Hinweise vollständig durch. Wenn Sie ein Verlängerungskabel verwenden, vergewissern Sie sich, Bewahren Sie die Anleitung auf. daß der Gesamtverbrauch aller angeschlossenen Geräte die Befolgen Sie alle Hinweise und Warnungen, die am Produkt selbst maximale Belastbarkeit des Verlängerungskabels nicht überschreitet. Stellen Sie ebenso sicher, daß der Gesamtverbrauch vermerkt sind. aller Geräte den Wert von 15 A nicht überschreitet. Ziehen Sie den Netzstecker aus der Ste
Résumé du contenu de la page N° 7
Folgende Schritte sollten für die richtige Verbindung des - Bildschirmgerätes mit dem Compoter befolgt werden. Die folgenden Hinweise sollten vor der Installation des sorgfältig beachtet werden ü ä ä • Das Bildschirmgerät nicht direkter Sonneneinstrahlung aussetzen. • Das Bildschirmgerät nicht in der Nähe von Wärmequellen aufstellen, z.B. Heizgeräten, Heizungen. • Das Bildschirmgerät nicht Regen oder übermäßiger Feuchtigkeit aussetzen. • Nicht die Belüftungsoffnungen blockieren oder abdecken. Di
Résumé du contenu de la page N° 8
8
Résumé du contenu de la page N° 9
• Multi-scanning at horizontal frequencies of 30kHz to 70kHz, vertical The AGX700 is a high-performance 17-inch (16.0-inch viewable) multi- frequencies of 50Hz to 140Hz scan color monitor that supports high refresh rates for no flicker. The • 17-inch (16.0-inch viewable) Sony Trinitron® picture tube AGX700 is capable of resolutions up to 1280 x 1024, and the intelligent • Aperture grille design for excellent brightness and color fidelity microprocessor-based design enables the AGX700 to automa
Résumé du contenu de la page N° 10
Before operating this monitor, please make sure that all the items listed below are present in your package: • AGX700 monitor • AC power cord • Drivers and utilities CD-ROM • User’s manual • Warranty information If any of the above items is found missing, please contact your dealer, or call Princeton Graphic Systems. Princeton Graphic Systems 2801 South Yale Street Santa Ana, CA 92704 Tel: 1-800-747-6249 (U.S. and Canada) or 1-714-751-8405 Fax: 1-714-751-5736 Internet Address: www.prgr.com 10
Résumé du contenu de la page N° 11
No tools are required to install the AGX700. Simply follow the instructions outlined in the next few pages. Adjust the controls, if necessary, to obtain the best display. Instructions on how to use the On-Screen Display controls and the Auto Setup button may be found in the next chapter, “Controls and Functions.” Connect the female end of the power cable to the power input receptacle on the back panel of the AGX700. Then plug the male end of the power cable into an AC outlet. Adjust the tilt an
Résumé du contenu de la page N° 12
6 5 4 3 2 1 the previous item in the OSD menu. Once a control is selected, use this button to adjust the display setting. Press this button to turn the power ON or OFF. There will be a short delay before the display appears. Activates the Brightness/Contrast control if the OSD menu is not active. While the OSD menu is active, use this button to move the highlight down This LED indicator turns green when the power is switched ON and the to the next item in the OSD menu. Once a control is select
Résumé du contenu de la page N° 13
direction, from the factory preset, your adjustments are being made. Use the or buttons to adjust the control. In addition, a second control The AGX700 features a PreVu™ On-Screen Display (OSD) menu with icon will appear allowing you to toggle between the control originally animated control icons designed to make adjusting your monitor display selected and a second control (for example, Contrast/Brightness). Use settings a more user-friendly process. When highlighted, the icon the
Résumé du contenu de la page N° 14
Select this control, then use the and buttons to center the image vertically on the display screen. Select this control, then use the and buttons to expand or decrease the image height to vertically fill the display screen. Select this control, then use the and buttons to straighten the sides of the image by pulling them in opposing directions. Select the Pincushion control, then use the button to select Pin Balance. Use the and buttons to straighten the sides of
Résumé du contenu de la page N° 15
Select this control, then use the and buttons to rotate the image Select “Color 4: User,” then use the button to scroll up and down the until the sides of the image are parallel to the edge of the bezel. RGB menu to G (Green). Use the and buttons to adjust the green level of the display. É Select this control, then use the button to select moiré. Use the and buttons to decrease the moiré, an interference pattern that Select “Color 4: User,” then use the bu
Résumé du contenu de la page N° 16
RESOLUTION FREQUENCY MODE NAME The AGX700 is a multi-scan monitor. It operates at horizontal frequencies H V H(kHz) V(Hz) between 30kHz and 70kHz, vertical frequencies between 50Hz and 640 480 31.5 60 140Hz. Because of its microprocessor-based design, it offers auto- 720 400 31.5 70 synchronization and auto-sizing capabilities. This monitor offers 11 pre- 640 480 37.5 75 programmed settings, which are listed in the table to the right. 800 600 46.9 75 These preset modes cover most of
Résumé du contenu de la page N° 17
The power management feature of the AGX700 enables the monitor to The power management feature of the AGX700 is comprised of four recognize VESA DPMS (Display Power Management Signaling) signals stages: On (green), Standby (amber), Suspend (amber/green), and from an VESA DPMS video adapter and power down to less than 8 watts Active Off (amber/green). In the Standby and Suspend modes, the high of power consumption. A VESA DPMS compatible video adapter achieves voltage function of the monitor sh
Résumé du contenu de la page N° 18
17” (16.0” viewable) nonglare, anti- 100 to 240V @ 50/60Hz; AC S M static, dark Sony Trintron® tube with EPA Energy Star compliant; VESA® ™ aperture grille and 90° deflection DPMS compatible; NUTEK compliant; On: <100W, Standby: 0.25mm <15W, Suspend: <15W, Active Off: <8W 1280 x 1024 @ 66Hz 32 to 104°F (0 to 40°C) 1024 x 768 @ 85Hz 10 to 80% (noncondensing) Unlimited 16.1” x 16.1” x 17.7” Auto-synchronizing 50Hz to 140Hz (410mm x 410mm x 449mm) Auto-synchronizing 30kHz to 70kHz Net: 39.9 lb. (1
Résumé du contenu de la page N° 19
The pin assignment of the connectors is listed below. This is for your information only. Please do not attempt to devise your own connections as it may damage the monitor. 1 Red 2 Green 3 Blue 4 No Connection 5 DDC Return 6 Red Ground 7 Green Ground 8 Blue Ground 9 No Connection 10 Sync. Ground 11 Ground 12 SDA 13 Horizontal Sync. 14 Vertical Sync. 15 SCL 19 1
Résumé du contenu de la page N° 20
Make sure all of the power connections are secure. If the monitor is plugged into a surge protector, make sure the surge protector is switched on. Check all the signal cable connections and make sure that they are secure. Adjust both the contrast and brightness controls to the highest settings. If you see a faint gray color appearing on the screen, the monitor is functioning properly but not receiving any signal from the computer’s display adapter. Also, the AGX700 features a self test screen
