Résumé du contenu de la page N° 1
SyncMaster 710T / 910T / 710N / 910N / 510T / 510N / 512N / 515V / 915V
/ 712N / 912N / 711T / 912T / 913N / 701T
Résumé du contenu de la page N° 2
Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended periods of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This
Résumé du contenu de la page N° 3
Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. This may cause an electric shock or fire. Do not connect too many extension cords or plugs to an outlet. This may c
Résumé du contenu de la page N° 4
Set down the monitor carefully. It could be damaged or broken. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. Leave a space for ventilation between the product and the wall. Poor ventilation may cause the interior temperature to rise and lead to a fire
Résumé du contenu de la page N° 5
Contact a Service Center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or a fire. Other Do not remove cover (or back). No user serviceable parts inside. This may cause an electric shock or a fire. Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any
Résumé du contenu de la page N° 6
This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor. This may cause malfunction, an electric shock or a fire. If a foreign substance enters the monitor, unplug the power cord and contact the Service Center . Do not use or store inflammable substances near the m
Résumé du contenu de la page N° 7
Sitting too close to the monitor on a continuous basis may damage eyesight. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not use the monitor where it can be exposed to strong vibrations. Exposure to strong vibrations can be a fire hazard and shorten the life of the monitor. When moving the monitor, turn the power switch off and unplug the power cord. Make sure that all cables, including the antenna cable and cables c
Résumé du contenu de la page N° 8
SyncMaster 510T / 710T / 910T / 711T / 912T / 701T Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Option 1 SyncMaster 510T / 701T Moniter & Simple stand Bottom Option 2 Monitor & Pivot stand Manual User's Guide, Monitor
Résumé du contenu de la page N° 9
Dirver, Natural Color Quick Setup Guide Warranty Card software, MagicTune™ software CD (Not available in all locations) Cable D-Sub Cable Power Cord DVI Cable(option) Front 1. Menu button [ ] Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu. 2. MagicBright button MagicBright is a new feature providing optimum viewing environment [] depending on the contents of the image you are watching. Currently four different modes
Résumé du contenu de la page N° 10
If this is the case, adjust the Brightness and Contrast by using the OSD menu. 3. Brightness button [ ] When OSD is not on the screen, Push the button to adjust brightness. 2,3. Adjust buttons [ ] Adjust items in the menu. 4. Enter button [ ] / Activate a highlighted menu item. / Source button Push the 'Source', then Selects the Video signal while the OSD is off. (When the Source button is pressed to change the input mode, a message appears in the center of the screen displaying the cu
Résumé du contenu de la page N° 11
SyncMaster 710T / 910T / 711T / 912T / 701T(Option) (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. Connect the DVI Cable to the DVI Port on the back of your Monitor. 2. DVI port 3. D-sub 15-pin port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. Use this button for turn the monitor on and off. 4. Power on/off Switc
Résumé du contenu de la page N° 12
SyncMaster 510N / 710N / 910N / 512N / 712N / 912N / 913N / 515V / 915V Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Option 1 SyncMaster 510N / 512N / 515V Moniter & Simple stand Bottom Option 2 Monitor & Pivot stand Manual User's Guide, Monitor
Résumé du contenu de la page N° 13
Dirver, Natural Color Quick Setup Guide Warranty Card software, MagicTune™ software CD (Not available in all locations) Cable D-Sub Cable Power Cord Front 1. Menu button [ ] Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu. 2. MagicBright button MagicBright is a new feature providing optimum viewing environment [] depending on the contents of the image you are watching. Currently four different modes are available: Cus
Résumé du contenu de la page N° 14
If this is the case, adjust the Brightness and Contrast by using the OSD menu. 3. Brightness button [ ] When OSD is not on the screen, Push the button to adjust brightness. 2,3. Adjust buttons [ ] Adjust items in the menu. 4. Enter button [ ] Activate a highlighted menu item. 5. Auto button Use this button for auto adjustment direct access. 6. Power button Use this button for turn the monitor on and off. 7. Power indicator This light glows green during normal operation, and blinks green o
Résumé du contenu de la page N° 15
SyncMaster 510T / 710T / 910T / 711T / 912T / 701T 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2. Using the DVI (Digital) connector on the video card. Connect the DVI Cable to the DVI Port on the back of your Monitor. 2-3. Connected to
Résumé du contenu de la page N° 16
SyncMaster 510N / 710N / 910N / 512N / 712N / 912N / 913N / 515V / 915V 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2. Connected to a Macintosh. Connect the monitor to the Macintosh computer using the D-SUB connection cable. 2-3. In the cas
Résumé du contenu de la page N° 17
SyncMaster 510T / 510N / 512N /515V 701T Monitor and Bottom Pivot Stand Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
Résumé du contenu de la page N° 18
SyncMaster 510T / 510N / 512N / 515V / 701T Simple stand Pivot stand A. Monitor B. Mounting interface pad 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the Stand from the LCD monitor. 4. Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with four screws that came with the arm-type base, wall
Résumé du contenu de la page N° 19
This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung.com/. 5. Monitor driver installation is completed. Windows XP | Windows 2000 | Windows NT | Linux When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the d
Résumé du contenu de la page N° 20
5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7. Click the "Browse" button then choose A:(D: \Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button.
