Résumé du contenu de la page N° 1
C68000K
Piano di cottura in vetroceramica induttivo
laca vitrocerámica de cocción por inducción
Ceramic Glass Induction Hob
Placa de cerâmica de vidro indução
Istruzioni di montaggio e per l'uso
Instrucciones para el montaje y para el uso
Installation and Operating Instructions
Montagem e indicações de utilização
Résumé du contenu de la page N° 2
Dear Customer, Please read these operating instructions through carefully. Above all, please take note of the “Safety” section on the first few pages. Please keep these operating instructions for future reference. Pass them on to any subsequent owner of the appliance. The warning triangle and/or specific words (Warning!, Caution!, 1 Important!) are used to highlight instructions that are important for your safety or for the function of the appliance. It is imperative that these instruct
Résumé du contenu de la page N° 3
Contents CONTENTS Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Appliance Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Function and the Way the Inducti
Résumé du contenu de la page N° 4
Contents Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Advantages for Cleaning and Caring for the Induction Cooking Zone . . . 92 Glass Ceramic Cooking Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Problem Dirt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 5
Operating Instructions OPERATING INSTRUCTIONS 1 Safety The safety aspects of this appliance comply with the accepted technical standards and the German Appliance Safety Law. However, we also consider it our obligation as a manufacturer to make you aware of the following safety information. Electrical Safety The new appliance may only be installed and connected up by quali- fied personnel, according to the manufacturers instructions and to the relevant country standards. Please observe this
Résumé du contenu de la page N° 6
Operating Instructions Special Notes on Induction Cooking Zones Scientific studies have shown that patients who are fitted with implanted pacemakers are not normally affected or put at risk by our induction cooking zones. The distance between the body and the cooking zone should, howe- ver, never be less than 30 cm! Electromagnetic fields can affect electronic circuits and interfere with portable transistor radios. Do not put magnetically rechargeable objects (e.g., credit cards, casse
Résumé du contenu de la page N° 7
Operating Instructions How to Avoid Damaging your Appliance Do not use the cooking surface as a work surface or for storage. Do not use the cooking zones with empty pots and pans. Glass ceramic is insensitive to temperature shock and very robust, however it is not unbreakable. Especially sharp and hard objects that fall on the cooking surface can damage it. Do not use pans with damaged bases that are rough and have burrs. Scratching may occur when the pans are slid. Do not place any
Résumé du contenu de la page N° 8
Operating Instructions 2 Disposal Disposing of Packaging Materials All packaging can be recycled, sheet and hard foam parts are appro- priately marked. Please dispose of packaging material and any old appliance with due regard to safety and the environment. Information on disposal The appliance must not be disposed of in the household rubbish. You can obtain information about collection dates or public tips from your local Council or Environmental Health Office. Warning! Before disposi
Résumé du contenu de la page N° 9
Operating Instructions Features of the Ceramic Hob Cooking zone 2: Cooking zone 3: Induction cooking zone 1800 W Induction cooking zone 1400 W Cooking zone 4: Induction cooking zone 1800 W with power function 2300 W Cooking zone 1: Induction cooking zone 2200 W Touch-control panel with power function 3000 W Control Panel Display timer Heat setting displays Interlock with Cooking zone displays indicator lamp Timer operation Timer Cooking zone selection Main button “On/Off” Power zone acti
Résumé du contenu de la page N° 10
Operating Instructions The Digital Displays Digits 1 to 9 and four different letters can appear in the display. The digits show the cooking stage set. 1 = Lowest capacity 9 = Highest capacity The following letters and functions are displayed for the cooking zones: H = Residual Heat Display 1 Danger! Cooking zone still hot; it extinguishes when the cooking zone has cooled down. This display appears only if the cooking zone is switched off. a = Automatic heating-up (possible for all cookin
Résumé du contenu de la page N° 11
Operating Instructions Cooking Zone Safety Switch 1 If one of the cooking zones is not switched off after a certain time or if the cooking stage is not changed, the corresponding cooking zone switches itself off automatically. j appears in the display of the relevant cooking zone. The cooking zones switch themselves off at: Cooking stage 1 - 2 after 6 hours Cooking stage 3 - 4 after 5 hours Cooking stage 4 - 5 after 4 hours Cooking stage 5 - 9 after 1.5 hours Resetting the Safety Cut-
Résumé du contenu de la page N° 12
Operating Instructions Suitable Kitchenware for Induction Cooking Zones Pots and Pans In principle all pots and pans with magnetic bases are suitable. These are steel, steel-enamel as well as cast-iron pots and pans. High grade steel pans with a mixed metal base (sandwich base, e.g. Tefal with an aluminium/copper base) are suitable for induction only if the manufacturer has expressly marked them as such. In that case they have a ferromagnetic percentage in the base. If you wish to use
Résumé du contenu de la page N° 13
Operating Instructions Pan Size Up to a certain limit the induction cooking zone adapts itself to the size of the pan base diameter. However, the pan base diameter must be of a minimum size, depending on the size of the cooking zone. For example: Diameter of the cooking zone 21 cm For example: Diameter of the pan base at least 18 cm For example: Diameter of the cooking zone 14,5 cm For example: Diameter of the pan base at least 12 cm Note: Please note the diameter of the pan base when buying
Résumé du contenu de la page N° 14
Operating Instructions Before Using for the First Time Initial Cleaning 0 Wipe the glass ceramic cooking surface with a damp cloth. Important: Do not use any caustic, abrasive cleaners! The surface could 1 be damaged. Using the Cooking Zones TOUCH CONTROL Sensor Field To operate the TOUCH CONTROL sensor field, place you finger from above and flat onto the required field until the corresponding indicator lamp lights up or goes out, or until the required function is carried out. For more speed
Résumé du contenu de la page N° 15
Operating Instructions The digital displays show j and the decimal point flashes. After you have activated the “On/Off” sensor field to switch on your 3 unit, one of the cooking zones must be selected with the cooking zone selection keys within approximately 10 seconds. Otherwise, the unit switches itself off again for safety reasons. Switching Off the Appliance To completely switch off the unit, activate the “On/Off” sensor field n. 0 Touch the “On/Off” sensor field for approximately 1 s
Résumé du contenu de la page N° 16
Operating Instructions Cooking Zone Selection To select the required cooking zone touch the corresponding sensor field for approximately 1 second. The zero with a decimal point = lights up in the associated display field of the cooking zone. The decimal point indicates that settings can only be made in this cooking zone. When you touch the cooking zone sensor field again, the decimal point goes out and further settings are not possible. To switch off the sensor fields, press + and - simul
Résumé du contenu de la page N° 17
Operating Instructions Cooking without the Automatic Heating-Up Function 0 1. For heating up/browning, select a high power. 2. As soon as steam forms or the fat is hot, switch back to the required heat setting for the remainder of the cooking time. 3. Reset to zero in order to end cooking. Note: 2 When cooking with the induction cooking zone you should take into account that – the heating-up times are reduced by the direct energy transfer to the pan! – the cooking process stops immediately a
Résumé du contenu de la page N° 18
Operating Instructions Cooking with the Automatic Heating-Up Function All four cooking zones of the cooking field can be controlled in nine stages and have an automatic heating-up function: – !, Lowest cooking stage – ), Highest cooking stage – a, Heating-up function. With the automatic heating-up function (a), the cooking zone opera- tes for a certain time at full capacity and then automatically switches back to the cooking stage, set for further cooking. The duration of the automatic heat
Résumé du contenu de la page N° 19
Operating Instructions A lights up in the cooking stage display. 3. Next, touch the sensor field - and set the required continued cooking stage - to (. The continued cooking stage set is then displayed. After 5 seconds, a appears in the display again instead of the conti- nued cooking stage. The continued cooking stage is displayed again after the heating-up time expires. If you select a higher stage when the automatic function is in opera- 3 tion, e.g. from § to %, the previous heating-up t
Résumé du contenu de la page N° 20
Operating Instructions Activating the Power Function Using the power function “P” you can increase the power of both front cooking zones for 10 minutes. With this function you can, for example, bring a large quantity of water rapidly to the boil or brown meat. 0 To switch on the power function, the cooking zone must be selected (decimal point in the display). Touch the “Power-function”r sensor field. A P appears in the display. The power function is now active. The power function is activate
