ページ1に含まれる内容の要旨
Instruction
booklet
Gas hob
ZGF 780 IT
GB IE
ページ2に含まれる内容の要旨
Thank you for selecting our appliance Thank you for selecting our appliance Thank you for selecting our appliance Thank you for selecting our appliance Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner o
ページ3に含まれる内容の要旨
Contents Important Safety Information Important Safety Information Important Safety Information Important Safety Information Important Safety Information ................................................................... ................................................................... ................................................................... ................................................................... ................................................................... 4 4 4
ページ4に含まれる内容の要旨
Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 727 727. IIIIInstallation nstallation nstallation nstallation nstallation This appliance must be installed and serviced by a competent person as stated in the Gas Safety (Installation and Use) Regulations Current Editions and the IEE Wiring Regulations. For appliances installed in the Republic of Ireland please refer to NS
ページ5に含まれる内容の要旨
Ensure a good ventilation around the appliance. A poor air supply could cause lack of oxygen. When using the hob for a long period time, the ventilation should be improved, by opening a window or increasing the extractor speed. Do not use this hob if it is in contact with water. Do not operate the hob with wet hands. Ensure the control knobs are in the ‘OFF’ position when not in use. When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of
ページ6に含まれる内容の要旨
Description of the Hob 3 3 5 4 1 2 6 1. Hob Top 2. Auxiliary Burner 3. Semi-rapid Burner 4. Rapid Burner 5. Triple Crown 6. Control knobs 6
ページ7に含まれる内容の要旨
Instructions for the User INSTALLATION Any gas installation must be carried out by a registered competent person, and in accordance with existing rules and regulations. The relevant instructions are to be found in the second section of this manual. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. WHEN THE HOB IS FIRST INSTALLED Once the hob has been installed, it is important to remove any protective materials, which were put o
ページ8に含まれる内容の要旨
Operation Operation Operation Operation Operation Hob burners control knobs Hob burners control knobs Hob burners control knobs Hob burners control knobs Hob burners control knobs The symbols on the knobs mean that : there is no gas supply (“off” position) there is maximum gas supply there is minimum gas supply Lighting the burners Lighting the burners Lighting the burners Lighting the burners Lighting the burners For easier lighting, proceed before putting a pan on the pan support. To light a
ページ9に含まれる内容の要旨
Do not keep the control knob pressed for more than 15 seconds. If the burner does not light even after 15 seconds, release the control knob, turn it the "off" position and wait for at least 1 minute before trying to light the burner again. When switching on the mains, after installation or a power cut, it is quite normal for the spark generator to be activated automatically. In the absence of electricity, ignition can occur without the electrical device; in this case, approach the burner with
ページ10に含まれる内容の要旨
Carefully supervise cooking with fat or oil, since these types of foodstuff can result in a fire, if over-heated. The stainless steel can become tarnished if excessively heated. Therefore prolonged cooking with potstones, earthenware pans or cast-iron plates is inadvisable. Also, do not use aluminium foil to protect the top during use. Make sure pots do not protrude over the edges of the cooktop and that they are centrally positioned on the rings in order to obtain lower gas consumption. Do not
ページ11に含まれる内容の要旨
Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. This appliance cannot be cleaned with steam or with a steam cleaning machine. The Hob T The Hob T The Hob Top op op The Hob T The Hob Top op Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing u
ページ12に含まれる内容の要旨
Pan Supports Pan Supports Pan Supports Pan Supports Pan Supports Wash the pan supports using hot soapy water. If necessary, a paste cleaner or a soap YES impregnated steelwool pad can be used with caution. The pan supports are not dishwasher proof; they must be washed by hand. After cleaning, be sure to wipe dry with a soft cloth. Take care when drying them as the enamelling process occasionally leaves rough edges. If necessary, remove stubborn stains using a paste cleaner. After cleaning, make
ページ13に含まれる内容の要旨
Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your local Service Force Centre. SYMPTOM SOLUTION There is no spark when Check that the unit is plugged lighting the gas. in and the electrical supply is switched on. Check that the RCCB has not tripped (if fitted). Check the mains fuse has not blown. Check the burner cap and crown have been replaced correctly, e.g. after cleaning. The gas ring burns unevenly. Check the
ページ14に含まれる内容の要旨
Instructions for the Installer Engineer technical data Engineer technical data Engineer technical data Engineer technical data Engineer technical data OVERALL DIMENSIONS Width: 744 mm Depth: 510 mm CUT OUT DIMENSIONS Width: 560 mm Depth: 480 mm SUPPLY CONNECTIONS Gas: R 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230 V~ 50 Hz supply, 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse HEAT INPUT Front Left Burner 2.0 kW (6826 BTU/HR) (semi-rapid) Rear
ページ15に含まれる内容の要旨
Gas burners Gas burners Gas burners Gas burners Gas burners BURNER RAPID SEMI-RAPID AUXILIARY TRIPLECROWN TYPE OF GAS POSITION MAX MIN MAX MIN MAX MIN MAX MIN NOMINAL THERMAL POWER kW 3.0 0.75 2.0 0.45 1.0 0.33 4.0 1.2 NATURAL GAS 20 mbar NOMINAL FLOW 3 RATE m /h 0.286 0.057 0.190 0.038 0.095 0.028 0.381 0.114 VALUE = 3 37.78 MJ/m NOZZLE REFERENCE 11 9 Adjust. 9 6 Adjust. 7 0 Adjust. 14 6 Adjust. 3 Ws - 50.7 MJ/ m 1/100 mm NOMINAL TH
ページ16に含まれる内容の要旨
Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Installation I.S. 813 Current Editions and the ETCI Rules for Electrical Installations. Provision for Ventilation Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B
ページ17に含まれる内容の要旨
Location Location Location Location Location The hob may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom or shower room. Ensure that there is a minimum distance of 55 mm between the rear cut out edge and the wall. A minimum distance of 450 mm must be left between the side edges of the cut out and any adjacent cabinets or walls. The minimum distance combustible material can be fitted above the hob in line with the edges of the hob is 400 mm If it is fi
ページ18に含まれる内容の要旨
Installation IMPOR IMPOR IMPOR IMPOR IMPORT T T T TANT ANT ANT ANT ANT Any gas installation must be carried out by a GAS SAFE REGISTER installer. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this instruction booklet be ignored. On the end of the shaft, which includes the G 1/2" threaded elbow, ad
ページ19に含まれる内容の要旨
Building In Building over a cupboard or drawer If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface. It is also recommended to carry out the electrical connection to the hob as shown in diagrams 1 and 2. Building over a kitchen unit 1 with door Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be
ページ20に含まれる内容の要旨
Fitting the Hob into the Worktop Carry out the building in of the hob as follows: • place the seals supplied with the hob on the front edge of the cut out. Then, place them at 86 mm from the side edges and at 10 mm from the rear edge, as shown in the diagram, taking care that the seals meet without overlapping. • place the hob in the cut out, taking care that it is centred; • fix the hob with the relevant fixing clamps, supplied with the accessories bag, as shown in the diagram. When the screws
