ページ1に含まれる内容の要旨
E
N
O
H
E
®
N
G
L
I
S
H
™
PHOTO PHONE P-300
P-300
Users’ Guide
M10799 P-300
5270-31811 A 6/03
∆
P
O
T
O
H
P
ページ2に含まれる内容の要旨
Contents SAFETY INSTRUCTIONS........................................................................1 INTRODUCTION ..................................................................................5 PACKAGE CHECKLIST...........................................................................6 FEATURES IDENTIFICATION ...................................................................7 INSTALLATION ....................................................................................8 A. Desk mountin
ページ3に含まれる内容の要旨
Important Safety E Instructions N G L When using your telephone 7.Place this telephone on a I equipment, basic safety precautions stable surface. Serious damage S should always be followed to and/or injury may result if the H reduce the risk of fire, electric telephone falls. shock and persons including the 8.Do not cover the slots and following: openings on this telephone. 1.Read and understand all This telephone should never instructions. be placed near or over a 2.Follow all warnings an
ページ4に含まれる内容の要旨
Important Safety Instructions dangerous voltage points or those controls that are short out parts that could covered by the operating result in a risk of fire or instructions. Improper electrical shock. Never spill adjustment may require liquid of any kind on the extensive work by a telephone. qualified technician to 13. To reduce the risk of electrical restore the telephone to shock, do not take this phone normal operation. apart. Opening or removing E. If the telephone has been cove
ページ5に含まれる内容の要旨
Important Safety E Instructions N G L this manual. Do not dispose The equipment must also be I of batteries in a fire. They installed using an acceptable S may explode. Check with method of connection. In some H local codes for possible cases, the company’s inside special disposal instructions. wiring associated with a single line individual service may be ADDITIONAL SAFETY NOTES extended by means of a certified FOR CANADIAN USERS connector assembly (telephone extension cord). The customer The
ページ6に含まれる内容の要旨
Important Safety Instructions CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. The Ringer Equivalent Number is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalent Number of all the d
ページ7に含まれる内容の要旨
E Introducing the P-300 N G L Thank you for selecting the exciting Help from Ameriphone I new PHOTO PHONE from S For help with using your PHOTO Ameriphone. These Operating H PHONE, call our Customer Relations Instructions and the associated department at 800-874-3005. Quick Operating Guide provide you with the information you need Please make sure your PHOTO to use your PHOTO PHONE PHONE package includes the items effectively and safely. Read this shown in Figure 1. manual thoroughly before usi
ページ8に含まれる内容の要旨
Package Checklist Office Doctor Office Doctor Bank Bank TM PHOTO PHONE P-300 Generic A D B E Button Icons C F G J M H K N I L O Q T X R U Y P S V W Z O P Phone Cords R HOLD PROG FLASH REDIAL RINGER AMPLIFY HANDSET PITCH VOL LO HI Base Unit Handset ✄ Photo Template P300 User Guide Telephone Line Cords Handset Operating Guides Coil Cord Phone Base Plate Figure 1 - Package Components 6
ページ9に含まれる内容の要旨
E Features on the P-300 N G L I Tone/pulse dialing selection S Phone line connection H DIAL RINGER Ringer volume control switch P T Off Lo Hi Office Doctor Photo memory buttons Bank Big button keypad TM PHOTO PHONE P-300 A D B E C F G J M N H K FLASH button I L O Q T X R U Y P S V W Z REDIAL/PAUSE button O P R AMPLIFY button HOLD PROG FLASH REDIAL AMPLIFY RINGER HANDSET PITCH VOL LO HI VOLUME control AMPLIFY ON indicator Bright ring flasher HOLD indicator light HOLD PROG programming RINGER P
ページ10に含まれる内容の要旨
1 4 1 4 Installation Follow the steps below to connect B. Wall Mounting and install your PHOTO PHONE. 1. Pull the handset hook out and reverse its position so that the A. Desk Mounting hook points up and will hold the handset when you hang up as shown in figure 4. 1. Set the dial mode switch to T (tone) if you have touch tone service. Set the switch to P (pulse) if you have pulse (rotary) dialing. 2. Connect telephone line cord to telephone as shown in figure 3. 3. Connect handset cord
ページ11に含まれる内容の要旨
E Installation N G L 4. Set the dial mode switch to I T (tone) if you have touch S tone service. Set the switch H to P (pulse) if you have pulse rotary) dialing. 5. Connect the handset cord to the telephone as shown in figure 3. Figure 5- Phone base installation for wall mounting 6. Lift the handset and listen for a dial tone. 3. Using the short modular 7. Your Photo Phone is cord, mount the phone as ready for use. shown in figure 6. Figure 6- Wall mounting installation 9 MANUAL AUTO
ページ12に含まれる内容の要旨
Operating your P-300 The PHOTO PHONE is designed to Office Doctor help you communicate easily. Bank There are many convenient, TM PHOTO PHONE P-300 A D B E C F easy-to-use features. G J M H K N I L O Figure 7 A. Photo Directory Set Up You can program up to 9 B. Programming The Photo Directory photo-dial memory buttons with the numbers you dial most 1. Lift the handset and press frequently. As these numbers PROG button. change, it is easy to change the 2. Enter a phone number as you photos a
ページ13に含まれる内容の要旨
E Operating your P-300 N G L C. Memory Dialing E. Amplify Button I Press the AMPLIFY button to turn the S Pick up the handset and simply amplifier on. When AMPLIFY is H press the photo directory button to on, it returns to your previous dial the phone number programmed. amplification setting and a red light ff will illuminate in the ring flasher area. When you hang up the Bank handset, it automatically turns off the amplifier. Figure 8 D. Amplifier Figure 10 The amplifier increases the inc
ページ14に含まれる内容の要旨
Operating your P-300 G. Ringer Pitch Control I. Last Number Redial Button The ringer can be adjusted to emit The PHOTO PHONE remembers the a high-pitched or a low-pitched last number dialed from the phone ring to suit your needs. up to 31digits. Lift the handset and simply press the REDIAL RINGER PITCH button to dial the last number dialed. Note: Press redial if you want to insert a pause between two Figure 12 numbers. H. Hold Button To put the line on hold, simply press the HOLD button a
ページ15に含まれる内容の要旨
E Operating your P-300 N G L J. Flash Button I The flash feature is used to access S special telephone functions and H services available from your local phone company, such as: call waiting, 3-way calling and others. Press this button to activate the flash feature. FLASH Figure 15 13
ページ16に含まれる内容の要旨
In Case Of Difficulty If any problem should arise during use of your PHOTO PHONE, try the suggestions listed below. Should the difficulty persist, contact Ameriphone or your authorized dealer for assistance. SYMPTOM CAUSE AND CORRECTIVE ACTION No dial tone Check all phone cord connections. No number dialed when No number stored in that memory memory button pressed button. See “Programming The Photo Directory”, p. 6. Call cannot be dialed, See "Installation" section to reset the or is dialed
ページ17に含まれる内容の要旨
E Regulatory Compliance N G L Part 68 of FCC Rules compliant. See installation I Information instructions for details. S H This equipment complies with The REN is used to determine Part 68 of the FCC rules. On the number of devices that may the bottom of this equipment is be connected to a telephone a label that contains, among line. Excessive RENs on a other information, the telephone line may result in the FCC registration number and devices not ringing in response ringer equivalence number t
ページ18に含まれる内容の要旨
Regulatory Compliance If this telephone equipment, the please contact Walker / P-300 telephone causes harm Ameriphone, 1-800-874-3005. to the telephone network, the If the equipment is causing telephone company will notify harm to the telephone network, you in advance that temporary the telephone company may discontinuance of service may request that you disconnect the be required. But if advance equipment until the problem is notice isn’t practical, the resolved. telephone company will notify D
ページ19に含まれる内容の要旨
E Regulatory Compliance N G L If your home has specially To comply with state tariffs, the I wired alarm equipment telephone company must be S connected to the telephone line, given notification prior to H ensure the installation of this connection. In some states, the telephone equipment does not state public utility commission, disable your alarm equipment. public service commission or If you have questions about corporation commission must what will disable alarm give prior approval of equi
ページ20に含まれる内容の要旨
Regulatory Compliance FCC rules. These limits are receiving television or designed to provide reasonable radio antenna. protection against harmful interference in residential 2.To the extent possible, installation. relocate the television, radio or other receiver This equipment generates, uses, with respect to the and can radiate radio telephone equipment. frequency energy and, if not (This increases the installed and used in separation between accordance with the the telephone equipme
