ページ1に含まれる内容の要旨
5800_CIB_1ATT 8/6/02 10:43 AM Page II
USER’S MANUAL
Part 2
Expansion Handset 5800
Please also read
Part 1 — Important
Product Information
© 2002 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Symbol are trademarks of AT&T Corp., licensed to Advanced American Telephones.
ページ2に含まれる内容の要旨
5800_CIB_1ATT 8/6/02 10:43 AM Page III Visit us at www.telephones.att.com © 2002 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 1AT&T 08/02
ページ3に含まれる内容の要旨
5800_CIB_1ATT 8/6/02 10:43 AM Page V CONTENTS BEFORE YOU BEGIN ......................................................................1 About Handset Registration....................................................................................1 About Softkeys.........................................................................................................1 CHARGE THE BATTERY...................................................................2 REGISTER THE HANDSET......................
ページ4に含まれる内容の要旨
5800_CIB_1ATT 8/6/02 10:43 AM Page 1 BEFORE YOU BEGIN About Handset Registration • You must register this (and any other) handset with the base, following the directions in “REGISTER THE HANDSET.” This handset is compatible with telephone models 5840 and 5830. • The original handset that came with the base is automatically registered as Handset 1. • Additional handsets will be assigned Handset 2, Handset 3, Handset 4, Handset 5, and Handset 6. • Whenever you install a handset battery pack, th
ページ5に含まれる内容の要旨
5800_CIB_1ATT 8/6/02 10:43 AM Page 2 CHARGE THE BATTERY 1 Install the handset battery pack. Use only the battery supplied with this handset or AT&T Accessory Battery Model 2401, SKU#91077. • When you install the battery pack the first time, the handset will display ENTER BASE ID. 2 a) Remove battery b) Align the contacts and compartment cover by place the battery pack in pressing on indentation the battery compartment. and sliding downward. c) Replace cover by sliding it on its track up over
ページ6に含まれる内容の要旨
5800_CIB_1ATT 8/6/02 10:43 AM Page 3 REGISTER THE HANDSET To Model 5830 Base Unit 1 Make sure to charge the handset battery pack at least 12 hours. 2 At the cordless handset, use the softkey to select NEW. 3 Enter the 15-digit Base Unit ID Code located on the underside of your Model 5830 base. 4 Use the softkey to select OK. The screen displays PLEASE WAIT!!. 5 After about 45 seconds, the screen displays FOUND BASE. If the handset displays BASE BUSY TRY LATER, the base is in use. To Model 584
ページ7に含まれる内容の要旨
5800_CIB_1ATT 8/6/02 10:43 AM Page 4 INSTALLATION Belt Clip Attach the belt clip (optional). a) Slide b) Press tabs c) To remove, down on belt clip lift one into into slots side grooves on back of with your to attach. handset to thumbnail reattach. and push back. Headset You can use this telephone hands-free when you install any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset. Plug the headset into the jack located on the left side of th
ページ8に含まれる内容の要旨
5800_CIB_1ATT 8/6/02 10:43 AM Page 5 Battery Life A fully charged battery provides an average talk time of about eight hours, or standby time of five days. NOTE: Talk time and standby time may vary depending on ¥ operating conditions. Charge the Handset Battery Pack • After a low battery indicator, the handset battery needs to be charged. • Place the handset in the base so the CHARGING light goes on. The battery pack is typically charged in nine hours. • If you repeatedly get a low battery in
ページ9に含まれる内容の要旨
Need Help Insert 8/6/02 8:25 AM Page 1 Congratulations on your purchase of this AT&T product. NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free 1 (800) 360-4121 or visit our website at www.telephones.att.com
