ページ1に含まれる内容の要旨
User’s manual
TL7610
DECT 6.0 cordless headset
ページ2に含まれる内容の要旨
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 45-48 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model number: TL7610 (Headset and headset base) Typ
ページ3に含まれる内容の要旨
Parts checklist Check to make sure the package includes the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual Quick start guide TL7610 TL7610 DECT 6.0 cordless headset DECT 6.0 cordless headset User's manual Quick start guide Cordless Over the ear hook headset Battery Telephone line cords Headset base Battery for compartment (4-conductor and headset cover 2-conductor) Headset Behind the neck Over the head Line Colored
ページ4に含まれる内容の要旨
Optional accessories The following optional accessories are compatible with your headset and headset base: • The TL7100 is a handset lifter with an optional external ring detector. • The TL7600 is an expansion headset (up to two headsets can be used with the same headset base). TL7100 TL7600 Visit our website www.telephones.att.com for more information about these products or to download the user's manuals.
ページ5に含まれる内容の要旨
User’s manual TL7610 DECT 6.0 cordless headset Table of contents Optional accessories ................. 5 Option 2: Headset base stand-alone installation ......15 Getting started Option 3: Headset base Quick reference guide - with corded phone for headset ......................................... 1 multiple line system or Headset indicator lights ........... 1 digital business system Alert tones ...................................... 3 installation .................................16 He
ページ6に含まれる内容の要旨
Over the head band ..............25 FCC Part 68 and ACTA.............50 Behind the neck band ..........27 FCC Part 15 ...................................53 Limited warranty .........................55 Operation Technical specifications ..........59 Headset operation .....................29 Operating range ......................59 Making a call.............................29 Extended range and Answering a call on the clarity ...........................................59 headset ...............
ページ7に含まれる内容の要旨
Getting started Quick reference guide - headset ON/OFF Press to make, answer, or end a call. Headset indicator lights ON/OFF light status On • Headset is charging in the headset base. • Headset is trying to register to the headset base. • Headset is searching for the headset base. Flashing • Flashes slowly when an incorrect type of battery is installed. • Flashes three times, followed by a pause. This cycle then repeats three more times and then shuts down to indicate the battery is very l
ページ8に含まれる内容の要旨
Getting started Quick reference guide - headset VOLUME / - + Press the volume keys on the side of the headset to adjust the listening volume when on a call (page 32). MUTE/FLASH Press to mute the microphone during a call (page 35). Press and hold to answer a call waiting call while on a call Earpiece (page 32). Press to mute the ring tone in the earpiece when there is an incoming call. Microphone Battery compartment cover Remove to install or replace the battery (page 8). 2
ページ9に含まれる内容の要旨
Getting started Alert tones Headset alert tones Three quick beeps • A VOLUME /+ - key is pressed when the volume is already at its highest or lowest setting. • The headset is not registered and the headset ON/OFF button is pressed. • The headset is out of range from the headset base during a call. One short beep Low battery warning. every 20 seconds One short beep The call is muted. every 15 seconds One long beep Call waiting alert tone. (repeated) One short beep The headset ON/OFF key is p
ページ10に含まれる内容の要旨
Getting started Quick reference guide - headset base Charging cradle Insert the headset here for charging (page 10). PAIR Press and hold to begin headset registration (pages 18-20) or deregistration (page 21). NO LIFTER MODE light On when NO LIFTER MODE is selected. Flashes while on a call, or another telephone is in use on the same line. Flashes quickly when there is an incoming call. LIFTER MODE light On when LIFTER MODE is selected. Flashes while on a call. Flashes quickly when there
ページ11に含まれる内容の要旨
Getting started Quick reference guide - headset base LIFTER AUDIO ADJUST Switch to choose the best headset audio quality when using LIFTER MODE. See page 17 of this manual or the handset lifter user's manual for more information. You can download the manual at www.telephones.att.com. VOLUME / Press the volume keys on the side of the headset base to adjust the speaking volume while on a call (page 32). MODE Press to choose between NO LIFTER MODE or LIFTER MODE when the headset is
ページ12に含まれる内容の要旨
Getting started Indicator lights Headset base indicator lights NO LIFTER MODE LIFTER MODE MUTE NO LIFTER MODE • On when NO LIFTER MODE is selected (default mode). • Flashes quickly when there is an incoming call. • Flashes when the headset is in use or another telephone on the same line is in use. LIFTER MODE • On when LIFTER MODE is selected. • Flashes quickl quickly y when ther when there e is an is an incoming call. • Flashes when the headset is in use. MUTE • On when a call is muted. •
ページ13に含まれる内容の要旨
Getting started Installation You must install and See pages 8-10 charge the battery before for instructions. STOP! using the headset. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.
ページ14に含まれる内容の要旨
Getting started Battery installation Install the battery as shown below. After installing the battery, you may be able to make and receive short calls. For optimal performance, charge the headset battery for at least 6 hours before use. When the headset is not in use, recharge the headset by returning it to the headset base. 1 1. If the battery compartment cover is attached, press on both sides of the cover and lift it up and off. 2. Insert the battery into the battery compartment with th
ページ15に含まれる内容の要旨
Getting started Headset base installation Installation preparation Before installing the headset base, remove the rear bottom piece of the headset base by pushing it away from the base (as shown in Figure 1). Figure 1 Install the headset base as shown on the following pages. After completing installation option 1, 2 or 3 (see page 13), slide the rear bottom piece into the headset base until it clicks into place (as shown in Figure 2). Figure 2 9
ページ16に含まれる内容の要旨
Getting started Battery charging After installing the battery, charge the headset by placing it in the headset base as shown below. The headset ON/OFF light is on when the headset is charging. Push ON/OFF light Insert 1. Insert the headset into 2. Push the headset downward the charging cradle. until the ON/OFF light on the headset turns on. CAUTION: There may be a risk of detonation if you use a wrong type of battery. Use only the supplied rechargeable battery or replacement battery (mode
ページ17に含まれる内容の要旨
Getting started Headset base installation No lifter mode or lifter mode There are two answer modes available on the headset base. The current mode is indicated by the NO LIFTER MODE or LIFTER MODE lights on the front of the headset base. • When plugging your headset base into the telephone wall jack (installation option 1 or 2), make sure the headset base mode is set MODE to NO LIFTER MODE. -OR- • When connecting your headset base to a multiple line corded telephone (installation option
ページ18に含まれる内容の要旨
Getting started Headset base installation Cord labels The cords provided with your headset are attached with colored labels to help you plug them into the correct jacks on the headset base. Each jack on the headset base is labeled and marked with a colored dot, allowing you to plug in the correct cords by matching the colors. If you are using installation option 3, you can attach the provided light blue colored label to the end of the curly handset cord of your telephone that you plug into
ページ19に含まれる内容の要旨
Getting started Headset base installation Installation options IMPORTANT: You have three installation options: Option 1: Connect the headset to a corded or cordless telephone (see page 14). You can use the provided line splitter to connect the headset to a telephone. Option 2: Connect the headset to a telephone wall jack (see page 15). This option enables you to use the headset with a single telephone line with or without a telephone. Option 3: Connect the headset base to the curly handset
ページ20に含まれる内容の要旨
Getting started Headset base installation Option 1: Headset base with corded or cordless phone installation To use this installation option, make sure the headset base mode is set to NO LIFTER MODE. • Plug the small end • Plug one end of the telephone of the headset line cord into the TEL WALL base power JACK (red dot) at the back of adapter into the the headset base. POWER jack (green dot) at the back of the headset base. • Plug the other end of the telephone line cord Telephone into
