ページ1に含まれる内容の要旨
25860
5.8 GHz Dual Cordless Handset Call
Waiting Caller ID Telephone/Answering
System User’s Guide
We bring good things to life.
ページ2に含まれる内容の要旨
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, pr
ページ3に含まれる内容の要旨
Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag
ページ4に含まれる内容の要旨
Table of Contents EQUIPMENT APPROVAL INFORMATION ..................2 CID INFORMATION ........................18 INTERFERENCE INFORMATION .............................3 REVIEWING CID RECORDS ..........................19 HEARING AID COMPATIBILITY .............................3 DELETING A CID RECORD .....................19 INTRODUCTION ................................................5 DELETING ALL CID RECORDS ................19 BEFORE YOU BEGIN .........................................6 STORING CID
ページ5に含まれる内容の要旨
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. This telephone answering system is designed to be simple to use, however, you can reach its full potential more quickly by taking a few minutes to read this user’s guide. This telephone/answering system is a multifunction product for use with Call Waiting Caller I
ページ6に含まれる内容の要旨
Before You Begin Parts Checklist Make sure your package includes the items shown here. Handset charge Battery cradle compartment doors Base Handsets Long telephone Handset batteries Belt clips AC power line cord converter Wall plate Telephone Jack Requirements To use this phone, you need an RJ11C type modular telephone jack, which might look like the one Modular pictured here, installed in your home. If you don’t telephone line jack have a modular jack, call your local phone company to
ページ7に含まれる内容の要旨
Handset and Base Layout display talk/callback (button) Caller ID-vol (-) Caller ID-vol (+) (caller ID/volume button) (caller ID/volume button) redial (button) format/mute (button) memory (button) headphone jack del/chan transfer/answerer (button) (delete/channel button) flash/prog ringer (switch) (flash/program button) review (button) skip (button) play/stop (button) # pause (button) * exit (button) erase (button) message (indicator) rev volume (buttons) (review button) PAGE (button) play/sto
ページ8に含まれる内容の要旨
Installation • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines. • Temporarily disconnect any equipment connected to the phone such as faxes, other phones, or modems. Important Installa
ページ9に含まれる内容の要旨
NOTE: You must connect the handset battery before use. NOTE: Battery and battery door are packaged together inside a plastic bag and are separate from the handset. • Locate the battery compartment on the back of the handset. • Plug the battery pack cord into the jack inside the compartment. • Insert the battery pack. NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment as shown in the illustration. BATTERY RED WIRE PRESS DOWN FIRMLY BLACK WIR
ページ10に含まれる内容の要旨
Wall Mounting NOTE: For best results, charge the telephone/answering system on a flat surface before hanging it on the wall. Slip the mounting holes (on the back of the base) over the wall plate posts and slide the unit down into place. (Wall plate not included.) Registration YOU MUST REGISTER BOTH HANDSETS TO THE MAIN BASE BEFORE USE! a) 1st handset - The 1st handset being charged on the main base station will automatically register after 16 hours of charging. b) 2nd handset - After the 2nd
ページ11に含まれる内容の要旨
• Press the ans on/off button to turn the answering system on and off. The MESSAGES indicator lights when the answering system is on. The indicator blinks when you have new messages. NOTE: The answering system displays “- -” when it is off. Voice Time/Day Stamp 1. Make sure the answering system is ON. 2. Press and hold the day/check button on the base to set the day of the week. 3. Press and hold the hour button on the base to set the hour (a.m. or p.m.). Example: 12AM, 1AM, or 12PM, 1PM. 4
ページ12に含まれる内容の要旨
Sample Outgoing Announcement Hi, this is (use your name here), I can’t answer the phone right now, so please leave your name, number and a brief message after the tone, and I’ll get back to you. Thanks. Reviewing the Announcement Press and release announce button to review your outgoing announcement. Ringer Select Switch Use the RINGER SELECT switch on the bottom of the base to set the number of times you want the phone to ring before the answering system answers the call. You may choose 3 r
ページ13に含まれる内容の要旨
Message Playback The messages indicator on the base lets you know when you have messages. To play messages, press play/stop. While a message is playing, you may do the following: • Press play/stop to stop the message playback. • Press and release rev to restart the current message; continue pressing and releasing rev to review previous messages. • Press and release skip to go to the next message. • Press and release the erase button to erase current message. Memory Full When the answering sys
ページ14に含まれる内容の要旨
Leaving a Memo Use the memo feature to leave a message. 1. Press and hold the memo button on the base. You must hold the button until you finish recording the memo. 2. Begin speaking after you hear the beep. 3. Release the memo button when finished. Telephone Set Up Programmable Menus There are four programmable menus available on the handset: Language, Local Area Code, Ringer Tone and Factory Default. When you program these settings, make sure the phone is OFF ( not in talk mode). Display L
ページ15に含まれる内容の要旨
2. Use the CID-VOL (- or +) buttons on the handset or the handset touch- tone pad to select 1, 2, or 3. 3. Press the flash/prog button again. NOTE: Press the *exit button once to keep the previous setting and return to the standby screen. Factory Default As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings. 1. Press the flash/prog button until DEFAULT shows in the display. The default i
ページ16に含まれる内容の要旨
2. When finished, place the handset back in the cradle, or press the talk/ callback button again. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless in the event of a power failure. Call Transfer During an external call, you may transfer the external call to another handset. 1. Press the transfer/answerer button on the originating handset. TRANSFERRING shows in the display. 2. Press the transfer/answerer button or talk
ページ17に含まれる内容の要旨
Volume When the phone is ON, press the CID-VOL (- or +) buttons to adjust the volume of the handset’s earpiece to a comfortable listening level. There are four settings to choose from. VOL 1 is the minimum volume level and VOL 4 is the maximum. Exit Press the *exit button on the handset to exit a menu function and return to the standby screen. Mute Use the format/mute button during a phone conversation to speak privately and off-line with a third party. 1. Press the format/mute button on the
ページ18に含まれる内容の要旨
Caller ID (CID) Caller ID (CID) is a service available from your local telephone company. For Caller ID to work on this system, you must subscribe to Caller ID service from your local telephone company. This unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time. The unit can store up to 40 calls for later review. Number of calls Time Date Caller ID phone number
ページ19に含まれる内容の要旨
NOTE: Check with your local phone company regarding name service availability. Reviewing CID Records As records are received and stored, the display is updated to let you know how many calls you have received. 1. Make sure the phone is OFF (not in talk mode). 2. Press the CID-VOL (+) button to scroll through the call records from the oldest to the most recent. OR 3. Press the CID-VOL (-) button to scroll through the call records from the newest to the oldest. Deleting a CID Record 1. Mak
ページ20に含まれる内容の要旨
NOTE: If the memory location is occupied, “REPLACE MEMO?” is displayed, and you must confirm replacement by pressing the memory button. If you do not want to replace number in memory location, press the *exit button. NOTE: It is necessary to format number prior to saving into memory location because you cannot format number after it is saved. Storing a Redial Number 1. Make sure the phone is OFF (not in TALK mode). 2. Press the memory button on the handset. 3. Press any number key (0-9) on the
