ページ1に含まれる内容の要旨
27944
40 Channel 2.4 GHz Color Display
Dual Handset Call Waiting Caller ID
Speakerphone System
User’s Guide
ページ2に含まれる内容の要旨
EQUIPMENT APPROVAL INFORMATION Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, p
ページ3に含まれる内容の要旨
INTERFERENCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection a
ページ4に含まれる内容の要旨
TABLE OF CONTENTS EQUIPMENT APPROVAL INFORMATION .........2 RINGER TONE ...............................12 INTERFERENCE INFORMATION ....................3 PHONE SETTING ..............................12 LICENSING ............................................3 LANGUAGE ..................................12 HEARING AID COMPATIBILITY (HAC) .........3 AREA CODE .................................13 TABLE OF CONTENTS ..............................4 SET TONE/PULSE ..........................13 TABLE OF CONTE
ページ5に含まれる内容の要旨
TABLE OF CONTENTS EXIT ...............................................20 INSERTING A PAUSE IN THE DIALING RINGER SWITCH ..............................20 SEQUENCE ......................................26 PAGING THE HANDSET .......................20 CONNECTING THE BELT CLIP ...............26 CALLER ID FEATURES ...........................20 CHANGING THE BATTERY ....................27 RECEIVING AND STORING CALLS .........21 BATTERY SAFETY PRECAUTIONS ..........27 REVIEW CALLER ID RECORDS .........
ページ6に含まれる内容の要旨
INTRODUCTION CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Your cordless telephone system with Caller ID and Call Waiting is designed to give you flexibility in use and high quality performance. To get the most from your new cordless telephone system, we suggest that you take a few minutes right now to read through this instr
ページ7に含まれる内容の要旨
Wall plate TELEPHONE JACK REQUIREMENTS To use this phone, you need an RJ11C type modular telephone jack, which Modular telephone line might look like the one pictured here, installed in your home. If you don’t jack have a modular jack, call your local phone company to find out how to get one installed. DIGITAL SECURITY SYSTEM Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. When you place the handset in
ページ8に含まれる内容の要旨
CAUTION: To reduce the risk of fire or personal injury, use only the ATLINKS, Inc. Nickel-Cadmium battery model 5-2548 that is compatible with this unit. 2. Locate the battery compartment on the back of the handset. 3. Plug the battery pack cord into the jack inside the compartment. NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment. To ensure proper battery installation, the connector is keyed and can be inserted only one way. BATTERY RED W
ページ9に含まれる内容の要旨
EXTRA CHARGING CRADLE 1. Plug the extra charging cradle into an easily accessible electrical outlet. 2. Place the handset on the charging cradle. 3. The charge indicator turns on, verifying the battery is charging. 4. Allow the phone to charge for 16 hours prior to first use. HANDSET LAYOUT display TALK/call back (button) CID/VOL - CID/VOL + (Caller ID/Volume - button) (Caller ID/Volume + button) SPEAKER (button) MENU (button) REDIAL (button) SELECT/TRANSFER (button) TONE*/exit (button) PAUSE#
ページ10に含まれる内容の要旨
PROGRAMMING FUNCTIONS The system uses a menu structure to give you access to all of the built-in features. You may program the following items in main menu: Time and Alarm Setting, Ringer Setting, Phone Setting and Display Setting. NOTE: During programming, you may press the TONE*/exit button at any time to exit and keep the previous setting. TIME AND ALARM SETTING You may program the following items: Set Clock and Set Alarm. SET CLOCK Handset clock will be updated automatically with the Cal
ページ11に含まれる内容の要旨
7. Use CID/VOL (+ or -) button select ON or OFF. • If you select OFF, the alarm will turn off. 8. If you select ON, repeat steps 7 through 9 in Set Time to set the time. Then the alarm tone menu shows in the display. M e l o d y 1 9. Use the CID/VOL (+ or -) button to select desired alarm tone. You will hear a sample of the alarm tone you select 10. Press SELECT/TRANSFER button to confirm. You will hear the confirmation tone. NOTE: When the alarm is sounding, you may press any button on t
ページ12に含まれる内容の要旨
6. Press SELECT/TRANSFER button to enter the menu. RINGER VOLUME shows in the display. 7. Use CID/VOL (+ or -) button to select HIGH or LOW. The default setting is LOW. 8. Press SELECT/TRANSFER button to save your selection. You will hear a confirmation tone. RINGER TONE There are 3 Ring Tones and 10 Ringer Melodies to choose from. Follow the procedures to choose your favorite ring tone. 1. Make sure your phone is OFF (not in talk mode). 2. Press the MENU button to go to the main menu. 3.
ページ13に含まれる内容の要旨
7. Use CID/VOL (+ or -) button to select ENGLISH, SPANISH or FRENCH. ENGLISH is default setting. 8. Press the SELECT/TRANSFER button to save your selection. You will hear a confirmation tone. 9. The unit will advance to the AREA CODE setting menu. AREA CODE 1. Make sure your phone is OFF (not in talk mode). 2. Press the MENU button to go to the main menu. 3. Use CID/VOL (+ or -) button to scroll to PHONE SETTING. 4. Press SELECT/TRANSFER button to confirm. 5. Use CID/VOL (+ or -) bu
ページ14に含まれる内容の要旨
7. Use CID/VOL (+ or -) button to select TONE DIALING or PULSE DIALING. TONE DIALING is default setting. 8. Press the SELECT/TRANSFER button to save your selection. You will hear a confirmation tone. 9. The unit will advance to the SET KEY TONE setting menu. SET KEY TONE 1. Make sure your phone is OFF (not in talk mode). 2. Press the MENU button to go to the main menu. 3. Use CID/VOL (+ or -) button to scroll to PHONE SETTING. 4. Press SELECT/TRANSFER button to confirm. 5. Use CID/VOL
ページ15に含まれる内容の要旨
5. Use CID/VOL (+ or -) button to scroll to HANDSET NAME menu. 6. Press SELECT/TRANSFER button to enter the menu. HANDSET NAME shows in the display. 7. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Wait for 1 second, press the 5 key 3 times for the second lette
ページ16に含まれる内容の要旨
7. Use CID/VOL (+ or -) button to scroll to NO or YES. The default is YES. NOTE: If you choose YES all the settings in the programmable menu are returned to factory default setting. 8. Press the SELECT/TRANSFER button to save your selection. You will hear a confirmation tone. NOTE: The following records can not be changed by resetting the default values; Time, Dialed/Received numbers, Caller ID records, Handset Volume, and Ringer On/OFF. DISPLAY SETTING You may program the following items: W
ページ17に含まれる内容の要旨
SET CONTRAST 1. Make sure your phone is OFF (not in talk mode). 2. Press the MENU button to go to the main menu. 3. Use CID/VOL (+ or -) button to scroll to DISPLAY SETTING. 4. Press SELECT/TRANSFER button to confirm. 5. Use CID/VOL (+ or -) button to scroll to SET CONTRAST menu. 6. Press SELECT/TRANSFER button to enter the menu. 7. Use CID/VOL (+ or -) button to select 1, 2 or 3. Contrast 2 is the default setting. 8. Press SELECT/TRANSFER button to save your selection. You will hear
ページ18に含まれる内容の要旨
2. To hang up, press the TALK/call back button or place the handset in the base cradle. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. NOTE: You can only use one handset at a time and there is no conference or intercom features for this model. RECEIVING A CALL 1. To answer a call press the TALK/call back button on the handset before you begin speaking. 2. To hang up, pre
ページ19に含まれる内容の要旨
1. Press the TALK/call back or SPEAKER buttons. 2. Press the REDIAL button. -OR- To choose from the last three numbers you dialed through menu: 1. Make sure the phone is OFF (not in talk mode). 2. Press MENU button to go to the Main Menu. 3. Use CID/VOL (+ or -) button to scroll to CALL RECORDS menu. 4. Press SELECT/TRANSFER button to enter the menu. 5. Use the CID/VOL (+ or -) button to scroll to DIALED menu. 6. Press the SELECT/TRANSFER button to confirm. 7. Use the CID/VOL (
ページ20に含まれる内容の要旨
CHANNEL BUTTON While talking on the phone, you might need to manually change the channel in order to reduce static caused by appliances, such as baby monitors, garage door openers, microwave ovens, or other cordless phones. Press and release the CHAN/delete button to move to the next clear channel. TEMPORARY TONE This feature is useful only if you have pulse (rotary) service. Temporary Tone Dialing enables pulse (rotary) service phone users to access touchtone services offered by banks, cred
