ページ1に含まれる内容の要旨
Operator Manual
LF215
User Guide
your document management partner
ページ2に含まれる内容の要旨
Operating Instructions Laser Facsimile For safe and correct use of this machine, please be sure to read the Safety Information in this manual before you use it.
ページ3に含まれる内容の要旨
About the Operating Instructions Your machine comes with the References: This Operating Instructions provides information you need for setting up your machine and installing the supplied software. It also provides all of the detailed instructions for using your machine as a printer, a scanner and a copier and information for maintaining and troubleshooting the machine. Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, i
ページ4に含まれる内容の要旨
Safety Information When using this machine, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. WARNIN
ページ5に含まれる内容の要旨
CAUTION: • Protect the machine from dampness or wet weather, such as rain and snow. • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. • When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). • Do not allow paper clips, staples, or other small metallic objects to fall inside the machine. • Keep toner (used
ページ6に含まれる内容の要旨
Declaration of Conformity Notice to Users in EEA Countries This product complies with the essential requirements and provisions of Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. Notice to Users Accessing Analog PSTN in EEA Countries This product is designed to be able to access analog PSTN in all EEA countries. Local PSTN compatibility is d
ページ7に含まれる内容の要旨
Positions of Labels and Hallmarks for WARNING and CAUTION Labels This machine has labels for WARNING and CAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated. * * *This label is stuck to hot surfaces. Be careful not to touch these areas. In accordance with IEC 60417, this machine uses the following symbols for the main power switch: means POWER ON. means POWER OFF. v
ページ8に含まれる内容の要旨
NOTICE Note to users in the United States of America Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
ページ9に含まれる内容の要旨
USA FCC Requirements 1. This equipment complies with Part 68 of the FCC rules and requirements adopted by the ACTA. On the cover of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXXX. If requested, this number must be provided to the telephone company. 2. This equipment uses the RJ11C USOC jack. 3. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the ap
ページ10に含まれる内容の要旨
Differences Between British and American English British English American English (Re)dialling (Re)dialing Colour Color Emphasise Emphasize Recognise Recognize Organise Organize Authorise Authorize Cancelling Canceling Customise Customize Socket Jack Labelling Labeling WARNING • Do not disassemble the machine as it may give you an electric shock. • If you print large amount of copies, the surface of the output tray may become hot. Be careful not to touch the surface, especially for child
ページ11に含まれる内容の要旨
CONTENTS Chapter 1: GETTING STARTED Setting Up Your Machine Unpacking .......................................................... 1.2 Selecting a Location ........................................ 1.4 Understanding the Component Location .................. 1.5 Front View ..................................................... 1.5 Rear View ...................................................... 1.5 Control Panel Functions ................................... 1.6 Attaching Accessories ..
ページ12に含まれる内容の要旨
Chapter 2: PAPER HANDLING Selecting Print Materials ....................................... 2.2 Type, Input Sources and Capacities .................. 2.2 Guidelines for Paper and Special Materials .......... 2.3 Selecting an Output Location ................................. 2.4 Printing to the Front Output Tray (Face down) .... 2.5 Printing to the Rear Output Slot (Face up) .......... 2.5 Loading Paper in the Paper Tray ............................ 2.7 Using the Manual Feeder
ページ13に含まれる内容の要旨
Receiving Manually in Tel Mode ............................ 4.12 Receiving Manually Using Remote Receive Start Code 4.13 Receiving Faxes Using the DRPD Mode .................. 4.13 Receiving Faxes in the Memory ............................. 4.14 Automatic Dialing One-touch Dialing ............................................... 4.15 Storing a Number for One-touch Dialing ........... 4.15 Sending a Fax using a One-touch Number ......... 4.16 Speed Dialing ...........................
ページ14に含まれる内容の要旨
Printing a Reduced or Enlarged Document .............. 5.13 Fitting Your Document to a Selected Paper Size ...... 5.14 Printing Posters .................................................. 5.15 Using Watermarks .............................................. 5.16 Using an Existing Watermark ........................... 5.16 Creating a Watermark .................................... 5.17 Editing a Watermark ...................................... 5.18 Deleting a Watermark ...................
ページ15に含まれる内容の要旨
Chapter 8: TROUBLESHOOTING Clearing Document Jams ...................................... 8.2 Clearing Paper Jams ............................................. 8.3 In Tray 1 ....................................................... 8.3 In Tray 2 ....................................................... 8.4 In the Paper Exit Area ..................................... 8.5 In the Fuser Area or Around the Toner Cartridge . 8.6 In the Manual Feeder ...................................... 8.6 Tips
ページ16に含まれる内容の要旨
GETTING STARTED 1 Thank you for purchasing this multifunctional product. Your machine provides you with printing, copying, scanning, and faxing functions! This chapter gives you step-by-step instructions for setting up your machine. This chapter includes: • Setting Up Your Machine • Installing Software • Setting Up the Machine System
ページ17に含まれる内容の要旨
Setting Up Your Machine Unpacking Remove the machine and all accessories from the packing carton. Make sure that the machine has been packed with the following items. If there is a missing item, contact the retailer where you bought the machine: * Starter Toner Cartridge AC Power Cord * ** Telephone Line Cord CD-ROM Quick Install Guide Quick Guide Document Output Support USB Cable (for America only) 1.2 GETTING STARTED
ページ18に含まれる内容の要旨
1 *** Key layout sheet Brand plaque (May already be affixed to the machine (for Europe only /May already be in some regions) affixed to the machine in some regions) * The appearance of the power cord and the telephone line cord may differ according to your country’s specifications. ** The CD-ROM contains the Type 2200 Driver, the Operating Instructions and the Adobe Acrobat Reader program. ***Peel off the brand plaque’s backing, and then stick down the plaque in the control panel’s left c
ページ19に含まれる内容の要旨
Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold and humidity. Do not set the machine close to the edge of your desk or table. Clearance Space • Front: 482.6 mm (enough space so that the paper tray can be removed) • Back: 250 mm (enough space for ventilation) • Right: 100 mm • Left: 100 mm (enough space for venti
ページ20に含まれる内容の要旨
