ページ1に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page i
INSTRUCTION MANUAL
CLT-5812
5.8 GHz
Dual handsets Cordless Telephone
with Call Manager Features
IMPORTANT
Charge the handset battery pack for a full 15-20 hours before
using your cordless handset for the first time.
www.sanyocanada.com
ページ2に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page ii Introduction Congratulations on your purchase of the CLT-5812 cordless telephone from SANYO. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 5.8 GHz technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features Dual Handsets Call Manager Features*: Caller ID and Caller ID on Call Waiting (each handset). *Each feature works with you
ページ3に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 1 CONTENTS Getting Started Introduction/Features ................................inside front cover Controls and Functions.......................................................E2 Getting started Checking the package contents..........................................E4 Setting up the phone ..........................................................E4 Basics Before using, register second handset to the base unit....E9 When to re-register handsets.....
ページ4に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 2 Controls and functions Dual Handsets 1 5 2 6 7 14 3 8 15 9 16 4 10 17 18 11 12 19 13 20 1. Handset antenna 11. REDIAL/PAUSE key 2. Belt clip hole 12. SELECT/CH key 3. Headset jack 13. Handset microphone and ringer speaker 4. Handset battery compartment 14. SPEED DIAL key 5. Handset earpiece 15. END key 6. LCD display 16. TALK/FLASH key 7. CID (caller ID)/MENU key 17. #/ (right cursor) key 8. (up)/VOL (volume)/RING key 18. MEM (memory) key 9. (down
ページ5に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 3 21 27 22 23 28 24 25 26 29 21. Base antenna 26. DC IN 9V jack 22. CHARGE/IN USE LED 27. Charging contacts 23. PAGE key 28. CHARGE LED 24. Base charging contacts 29. DC IN 9V jack 25. Telephone line jack E3
ページ6に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 4 GETTING STARTED Checking the package contents Make sure you have received the following items in the package. • Base unit (1) • Handset (2) • AC adapter (2) • Rechargeable battery (2) • Telephone cord (1) • Charging cradle (1) • This instruction manual • Belt Clip (2) Setting up the phone Do the following steps: A. Choose the best location B. Install the rechargeable battery packs into the handsets C. Connect the base unit and charging cradle and
ページ7に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 5 GETTING STARTED B. Install the rechargeable battery packs into the handsets Both handsets are powered by a rechargeable battery packs. The battery recharges automatically when the handset is placed in the base unit or charging cradle. IMPORTANT Use only the Sanyo rechargeable battery pack supplied with your cordless telephone. Charge the handset battery packs for at least 15-20 hours before using your new cordless telephone for the first time! To
ページ8に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/10/05 5:28 PM Page 6 GETTING STARTED Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, ¨Low Battery¨ appears on the LCD and none of the keys will operate. If the phone is in use, ¨Low Battery¨ flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to either charging cradle for charging. Notes:
ページ9に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 7 GETTING STARTED C. Connect the base unit and charging cradle and charge the handsets Route the cord. 1 Connect each AC adapter to the DC IN 9V jack and to each standard 120V AC wall outlet. 2 Set the base and charging cradle on a desk or tabletop, and place one handset in the base unit and the other in the charging cradle. 3 Make sure that the CHARGE/IN USE and CHARGE LED illuminates. If the LED does not illuminate, check to see that the AC adapt
ページ10に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 8 GETTING STARTED • After installing the battery packs in the handsets, charge your handsets at least 15-20 hours before plugging into the phone line. 4 Place one handset in the base unit and one handset in the charging cradle for 15-20 hours without interruption. The base or charging cradle unit’s LED light (labeled CHARGE/IN USE or CHARGE) illuminates once the handset is placed in the base and charging cradle. The LED light will illuminate whether
ページ11に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 9 GETTING STARTED Before using, register second handset to the base unit When the dual handsets are removed from the packaging, the handset that is placed in the base unit first (to charge battery for 15- 20 hours), will automatically be registered to the base unit. (It does not matter which handset you choose to place in the base unit first.) You will also need to register the second handset by placing it in the base cradle. The second handset WIL
ページ12に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 10 GETTING STARTED When to re-register handsets 1 You’ll need to re-register the second handset (follow steps on page E9) each time the digital security code is changed. Refer to page E38 for details regarding the Digital Security Code. 2 When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a move), both handsets will need to be re- registered. To re-register,
ページ13に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 11 GETTING STARTED Mounting the base unit on a wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1 Plug the AC adapter into the DC IN 9V jack. 2 Wrap the AC adapter cord inside the molded wiring channel as shown. 3 Plug the AC adapter into a standard 120V AC wall outlet. 4 Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as shown. 5 Plug the telephone line co
ページ14に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 12 GETTING STARTED Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive cable lengths. • Make sure the wall material is capable o
ページ15に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 13 GETTING STARTED Setting menu options There are five setup options available. They are Automatic Talk, CIDCW (Caller ID on Call Waiting), Area Code, Dial and Language. Automatic Talk allows you to answer the phone without pressing the TALK/FLASH key. If the phone rings when Automatic Talk is On, simply remove the handset from the base or charging cradle and the phone automatically answers the call. If the phone rings when Automatic Talk is Off, y
ページ16に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:22 PM Page 14 GETTING STARTED Entering your area code If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number. 1 When the phone is in standby mode,
ページ17に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:22 PM Page 15 GETTING STARTED Choosing the dialing mode Most phone systems use tone dialing which sends DTMF tones through the phone lines. However, some phone systems (such as those in rural areas) still use pulse dialing. The default setting is tone dialing. Depending on your dialing system, set the mode as follows: Notes: • Make sure your battery pack is fully charged before choosing the dialing mode. • Dialing mode can only be changed from handset 1. To co
ページ18に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:22 PM Page 16 BASICS Making and receiving calls Handset On Base Handset Off Base or Charging Cradle or Charging Cradle Pick up the handset Press the TALK/FLASH key (Automatic Talk: On) or pick (Automatic Talk: Off), or To receive up the handset and press press the TALK/FLASH, a call the TALK/FLASH key /TONE/ , #/ , or any (Automatic Talk: Off). number key (Automatic Talk: On). 1) Pick up the handset. 1) Press the TALK/FLASH key. 2) Press the TALK/FLASH key. 2
ページ19に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:22 PM Page 17 BASICS Adjusting the handset ringer and earpiece volume Handset ringer tone and volume Press the volume up key or volume down key (labeled as, the VOL/RING or VOL/RING key) in standby mode to select one of five ringer tones and volume combinations. Earpiece volume Pressing the volume up key or volume down key (labeled as, the VOL/RING or VOL/RING key) during a call will change the earpiece volume of the handset. This setting will remain in ef
ページ20に含まれる内容の要旨
UP016DH(CLT5812) ENG OM 3/7/05 5:22 PM Page 18 BASICS Redial The REDIAL/PAUSE key redials the last number dialed. The redialed number can be up to 32 digits long. Tone dialing switch-over Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dialing during the call. This feature is useful when you need tone dialing to use automated systems, for example, entering your
