ページ1に含まれる内容の要旨
DXAI4588
Series
ページ2に含まれる内容の要旨
Contents Adjusting the Earpiece Volume ......................................... 26 Welcome/Accessibility...................................................2 Using Call Waiting ............................................................. 27 Terminology/Manual.Conventions................................3 Selecting a Different Channel ........................................... 27 Product.Overview...........................................................4 Find Handset ...........................
ページ3に含まれる内容の要旨
Welcome Congratulations on your purchase of the Uniden dual-handset cordless telephone. This cordless phone is designed for reliability, long life, and outstanding performance. Note:.Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this. manual.may.differ.from.the.actual.unit..The.color.of.your.cordless.telephone.may.vary. ® Uniden is a registered trademark of Uniden America Corporation. AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden Amer
ページ4に含まれる内容の要旨
Terminology Base The main part of the phone that connects to your phone line and lets you make and receive calls. Charger A cradle that charges the handset battery. It connects to power but does not connect to a phone line. Caller ID is available from your telephone provider. With this service, you can see the name and number CID of incoming callers. Caller ID on Call Waiting is available from your telephone provider. With this service, you can see CIDCW incoming caller information while on an
ページ5に含まれる内容の要旨
Product.Overview Main.Phone.Features • 2.4 GHz Extended Range Technology • Last Number Redial • Dual-Handset System • Tone/Pulse Dialing (Extra Handset & Charger Included) • Page/Find Handset Key • Call Transfer from Handset to Handset • Earpiece/Ringer Volume Controls • Caller ID/Caller ID on Call Waiting • Mute or Turn Ringer Off • 3-Line Backlit LCD • Hearing Aid Compatible • Trilingual Menu Displays (English, Spanish, or French) • 20-Channel Auto Scan • 30 Caller ID Memory • Desk or Wall Mou
ページ6に含まれる内容の要旨
Controls.and.Functions Handsets . Handset antenna 11 2. Handset battery compartment 3. Handset earpiece 4. LCD display 33 5. [vol/ / / ] (volume & ringer up/down) key 6. [cid/menu] key 44 7. [ /tone/ ] (left cursor) key 8. [redial/pause] key 55 9. [select/channel] key 10 10 0. [memory] key 66 11 11 . [end] key 12 12 2. [talk/flash] key 3. [#/ ] (right cursor) key 4. [delete/transfer] key 22 5. Handset ringer speaker 77 13 13 6. Handset microphone 88 14 14 7. Handset
ページ7に含まれる内容の要旨
8. Base speaker Main.Base.Unit 9. Base charging contacts 20 2021 2122 22 23 23 24 24 20. [menu/clock] key 2. [set] key 22. Message counter LED 18 18 23. Main Base antenna 24. charge/in.use LED 25 25 25. [vol/select/ / ] 26 26 19 19 (volume/select up/down) key 27 27 26. [ ] (play/stop) key 28 28 27. [ ] (delete) key 36 36 37 37 28. [ ] (skip/fast forward) key 29. [ ] (answer on/off) key 29 29 30 30 31 31 32 32 33 33 34 34 35 35 30. [ ] (repeat/rewind) key 3. Mic (microphone) Extra.Chargin
ページ8に含まれる内容の要旨
Installing.the.Phone Choosing.the.Best.Location Before choosing a location for your new phone, here are some important guidelines you should consider: A Avoid heat sources, such as radiators, void heat sources, such as radiators, A Avoid noise sources such as a window by void noise sources such as a window by air ducts, and sunlight air ducts, and sunlight a street with heavy traffic a street with heavy traffic A Avoid television sets and other void television sets and other A Avoid microwave ov
ページ9に含まれる内容の要旨
Installing.the.Rechargeable.Battery.Packs.into.the.Handsets Each handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the handset is placed in the base or charging cradle. To install the rechargeable battery pack: 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the small jack inside the battery c
ページ10に含まれる内容の要旨
Installing.the.Base.Unit.and.Charging.Cradle ) Connect each AC adapter to the DC.IN.9V jack and to each standard 20V AC wall outlet. Note:. •..Use.only.the.supplied.AD-314.AC.adapter.for.the.base. unit.and.AD-310.or.AD-1010.for.the.charging.cradle.. Do.not.use.any.other.AC.adapter. •..Do.not.place.the.power.cord.where.it.creates.a.trip. hazard.or.where.it.could.become.chafed.and.create.a. fire or electrical hazard. 2) Charge the handsets by placing one handset in the base unit and the other
ページ11に含まれる内容の要旨
3) Make sure that the charge/in.use LED and LED illuminate. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the cradle’s charging contacts. Note:. •..Connect.the.AC.adapter.to.a.continuous.power.supply.(not. controlled.by.a.wall.switch). •..Place.each.cradle.close.to.the.AC.outlet.to.avoid.long. extension.cords. •. Charge.your.handsets.at.least.15.-.20.hours.before.plugging. into.the.phone.line.. 4) Once the handset
ページ12に含まれる内容の要旨
Mounting.the.Base.Unit.on.a.Wall Standard.wall.plate.mounting This phone can be mounted on any standard wall plate. 1 ) Snap the wall mount adapter into the notches on the base top. 2) Plug the AC adapter to the DC.IN.9V jack. 3) Plug the AC adapter into a standard 20V AC wall outlet. 4) Plug the telephone line cord into the TEL.LINE jack. 2 4 5) Route the telephone line cord through the groove as shown. 6) Plug the telephone line cord into the telephone outlet. 5 7 7) Align the mounting slot
ページ13に含まれる内容の要旨
Direct.wall.mounting If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #0 screws
ページ14に含まれる内容の要旨
Register.Handsets.to.the.Main.Base.before.Using! Both handsets will need to be registered to the main base unit before use. Whichever handset you choose to charge in the base unit will automatically register to the base unit. The handset charging in the extra charging cradle MUST also be registered to the base unit before use. To register the extra handset: ) Be sure both handsets are fully charged. 2) Pick up the handset from the charging cradle, and place it in the base unit. The charge/in
ページ15に含まれる内容の要旨
When.to.Re-register.Handsets In some cases, it may be necessary to re-register your handsets. To re-register your handsets, please follow registration steps outlined on page 3. Re-registration is required in the following scenarios: ) You’ll need to re-register both handsets (follow steps on page 3) each time the digital security code is changed. (Refer to page 47 for details regarding the Digital Security Code.) 2) When there is a power failure for more than one hour: If power failure o
ページ16に含まれる内容の要旨
Basic.Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset . If you try to set by using other handset, you will not see these options listed on the LCD screen. (You can easily identify Handset shows as HS1 will be seen in the display while the phone is charging.) AutoTalk, Area Code and Language options can be set by using any handset. Ac
ページ17に含まれる内容の要旨
Activating.Caller.ID.on.Call.Waiting.(HS1.only) Caller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line. You must subscribe to Caller ID service through your local telephone provider to use this feature. ) When the phone is in standby, press and hold [cid/menu]. The following screen appears. 2) Press [vol/ / ] to move the pointer to sel
ページ18に含まれる内容の要旨
2) Press [vol/ / ] to move the pointer to select AREA CODE. 3) Press [select/channel]. If an area code was already stored, the phone will display it. 4) Use the number keys ( [0] – [9] ) to enter the 3-digit area code. If you make an error, use [delete/transfer] to backspace. 5) Press [select/channel]. A confirmation tone sounds. 6) Press [end] or return the handset to the charging cradle to complete the setting. The handset returns to standby. Choosing.the.Dialing.Mode.(HS1.only) Your phone c
ページ19に含まれる内容の要旨
2) Press [vol/ / ] to move the pointer to select DIAL. 3) Press [select/channel] to set the phone to pulse dialing. 4) Press [end] and return the handset to the base unit to complete the setting. The handset returns to standby. Note:. •. If.your.phone.system.requires.pulse.dialing.and.you.need.to.send.the.DTMF.tones.during.a.call,. you.can.temporarily.switch.over.to.tone.dialing..(Refer.to."Tone.Dialing.Switch-over".on.page.28.) •. To.enable.the.setting.change.of.Dialing.Mode,.you.need.to.retur
ページ20に含まれる内容の要旨
Using.the.Speed.Dial.Memory Your cordless phone allows you to store up to 0 names and numbers in each handset. You can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. An example is a frequently refilled prescription number. Store your pharmacy phone number in one speed dial and your most frequently refilled pr
