ページ1に含まれる内容の要旨
Contents
Answering Device Remote Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Handset Controls and Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Base Unit Controls and Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Battery Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduc
ページ2に含まれる内容の要旨
Turning the Answering System On/Off . . . . . . . . . . . . . . . . . . . . . . . 41 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Reviewing Time and Day Stamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Setting Your Outgoing Message (OGM). . . . . . . . . . . . . . . . . . . . . . 46 Selecting a Preset OGM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 VOX/Calling Party Control Feature. . . . . . . . . . .
ページ3に含まれる内容の要旨
Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or aerosol cleaners. 4. Do not use this product near water; for example, near a bath tub, wash bowl, kitch
ページ4に含まれる内容の要旨
12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally when following the operating instructions. (Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in dama
ページ5に含まれる内容の要旨
Introduction Congratulations on your purchase of the Uniden XCA650 Cordless Telephone. This phone is designed to exacting standards which provide reliability, long life, and outstanding performance. Features • 25 Channels • Random Code™ Digital Security • AutoTalk™ • UltraClear Plus • AutoStandby™ • AutoSecure™ • Speakerphone • Page/Find Button • Pulse/Tone Dialing • Base/Handset Volume Controls • 10-Number Memory • Talk/Battery Low Indicator • Redial/Flash Key • 14 Day Battery Life AutoTalk™
ページ6に含まれる内容の要旨
® Operating Guide batt low ? mem ringe han flash pause redial talk talk tone r c remote Included with the XCA650 If any of these items are missing or damaged, contact Uniden Customer Service at: (800) 297-1023, 8:00 am to 5:00 pm Central, Monday through Friday. Handset Base Unit Rechargeable Battery Long Telephone Cord Short Telephone Cord AC Adapter Operating Guide Other Printed Material 6
ページ7に含まれる内容の要旨
Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm. Caution: Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Operating Guide, could void
ページ8に含まれる内容の要旨
Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless Handset, or clicking noises in the Base Unit. This interference is caused by external sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem. In addition, we recommend that the Base not be plugged into a ci
ページ9に含まれる内容の要旨
Installation Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: • The location should be close to both a phone jack and continuous power outlet. Note: A continuous power outlet is an AC outlet which does not have a switch to interrupt its power. • Keep the Base Unit and Handset away from sources of electrical noise such as motors or fluorescent lighting. • Be sure there is sufficient space to fully extend the Base Unit ant
ページ10に含まれる内容の要旨
+ – Connecting the Telephone Cords Consider these safety guidelines before connecting the telephone cords: CAUTION: • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected. • Use caution when installing or modifying telephone lines. Applying Power to the Base Unit All the XCA650 phones require an AC outlet, without a switch to interrupt power, and the included AC Adapter. To relieve strain o
ページ11に含まれる内容の要旨
Adapter Safety Feature The AC Adapter furnished with this phone may be equipped with a polarized line plug — a plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. Do not alter the shape of the blades of the polarized plug. Desk or Tabletop Installation 1. Place the Base on a desk or tabletop. 11
ページ12に含まれる内容の要旨
+ – 2. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 3. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 4. Place the AC Adapter cord around the strain relief. 12 + – RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE
ページ13に含まれる内容の要旨
5. Plug the other end of the cord into the telephone jack on the wall. 6. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. 13
ページ14に含まれる内容の要旨
Wall Installation Standard Wall Plate Mounting These phones are designed to be mounted on a standard AT&T or GTE wall plate. 1. Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 2. Place the telephone cord inside RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE the molded channel on the bottom of the Base Unit. 14
ページ15に含まれる内容の要旨
3. Plug the AC Adapter into the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 4. Place the AC Adapter cord RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE inside the molded channel. 5. Plug the telephone cord into the modular jack on the wall. Place the Base Unit on the posts of the wall plate and push down until it’s firmly seated. 15
ページ16に含まれる内容の要旨
6. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. Direct Wall Mounting If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following: • Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • M
ページ17に含まれる内容の要旨
2. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE 3. Place the cord inside the RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE molded channel on the bottom of the Base Unit. 4. Plug the AC Adapter into the Base Unit. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE 17
ページ18に含まれる内容の要旨
5. Place the AC Adapter cord RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE + - inside the molded channel. 6. Place the Base Unit on the screws and push down until it’s firmly seated. 7. Plug the other end of the telephone line cord into the wall jack. 18
ページ19に含まれる内容の要旨
8. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. Setting the Handset Retainer The Handset Retainer holds the Handset in place if your phone is mounted on a wall. The steps below describe how to remove and replace the retainer so that the tab faces up. 1. Push up on the Handset Retainer on the Base Unit, and slide the tab out. 25 CHANNEL 2. Flip the retainer over so the tab
ページ20に含まれる内容の要旨
3. Put the retainer back into its slot on the Base Unit. 25 CHANNEL 4. Push down on the Handset Retainer until it snaps into place. 25 CHANNEL 20
