ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
Color Television
ET 13P2
ET 19P2
ページ2に含まれる内容の要旨
C CA AU UT TIIO ON N R RIIS SK K O OF F E EL LE EC CT TR RIIC C S SH HO OC CK K D DO O N NO OT T O OP PE EN N CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to
ページ3に含まれる内容の要旨
EMERSON RADIO CORP. 9 Entin Road P.O. Box 430 Parsippany. NY07054-0430 1-888-508-2627 Dear Customer : Emerson Radio Corp. would like to thank you for choosing this color television receiver. It incorporates a host of features designed to give you excellent performance for many years to come. We realize that you’re eager to turn it on and begin enjoying the high-quality pictures it deliv- ers just as quickly as possible, but we ask you to take a few minutes to read the instructions in the bookle
ページ4に含まれる内容の要旨
CONTENTS Table of Contents Important Safeguards 2 Chapter 1: Overview of Your Equipment 4 Your TV's Front Panel 4 Your TV's Back Panel 4 Your Remote Control 5 Installing your remote control batteries 6 Notes 6 Chapter 2: Connecting an Antenna or Cable to Your TV 7 Connecting an Antenna 7 Connecting a Cable System 8 Connecting Other Pieces of Equipment 9 Safety Note 9 Chapter 3: Operating Your TV 10 Turning your TV On 10 Programming Your TV's Channel Memory 10 Changing Channels 11 Changing the Vo
ページ5に含まれる内容の要旨
SAFETY IMPORTANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 7 Slots and openings in the cabinet and the back or bottom are provided for ven- 2 Save these instructions for later use. tilation and to ensure reliable operation 3 Unplug this television equipment from of the television equipment; and to pro- the wall outlet before cl
ページ6に含まれる内容の要旨
aged. 13 An outside antenna system should not be located in the vicinity of overhead (f) When the television equipment power lines or other electric light or exhibits a distinct change in perfor- power circuits, or where it can fall into mance - this indicates a need for ser- such power lines or circuits. When vice. installing an outside antenna system, 18 When replacement parts are required, be extreme care should be taken to keep sure the service technician has used from touching such power li
ページ7に含まれる内容の要旨
CHAPTER 1 Overview of Your Equipment Your TV comes with a remote control. The section below summarizes the buttons, controls, and terminals that you will use with your TV. Your TV's Front Panel 1 POWER Use this button to turn your TV on or off. 2 t CHs Use these buttons to change channels on your TV, or to select items in the menu system. 3 CVOLB Use these buttons to change your TV's volume, to activate selections in the menu system, or to change audio and video settings. 4 MENU Use this butto
ページ8に含まれる内容の要旨
Your Remote Control 1. POWER Use this button to turn your TV on or off. 2. MUTE Use to turn the TV’s sound on and off. 3. t CHs POWER MUTE Use these buttons to change channels on 2 1 your TV, or select items in the menu system. C H 4. CVOLB Use these buttons to change your TV's vol- 3 MENU ume, to activate selections in the menu sys- tem, or to change audio and video settings. 4 4 5. MENU 5 VOL Use this button to turn the TV's menu sys- VOL tem on and off. 3 6. DISPLAY C H Use this button to d
ページ9に含まれる内容の要旨
Installing your remote control batteries 1 Open the battery compartment on the back of the remote control. 2 Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. Notes Do not mix different types of batteries, or mix an old and a new battery. Remove and replace weak batteries. Weak batteries can leak and damage your con- troller. Dispose of batteries properly; never throw them into a fire. Point your remote at the
ページ10に含まれる内容の要旨
CHAPTER 2 Connecting an Antenna or Cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown below, not all of them. All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a silver metal post partially surrounded by two plastic tabs. For help in locating
ページ11に含まれる内容の要旨
Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads, you must obtain a combiner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from combiner onto the antenna
ページ12に含まれる内容の要旨
OUT IN IN OUT OUT IN If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4 and change channels using the converter box. If your cable system only requires you to use a converter box for some channels (i. e. pay-TV channels), follow these ste
ページ13に含まれる内容の要旨
CHAPTER 3 Operating Your TV Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the remote, you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of available channels. Turning Your TV On 1 To turn your TV, press the POWER button on the remote con- trol. You can also use the POWER button on the front panel. Make sure your TV is plugged in before you try to turn it on. Programming Your TV's Channel Memo
ページ14に含まれる内容の要旨
Changing Channels You can change channels in three ways: 1 The t CHs buttons will take you through all memorized 1 channels, one by one. The t CHs buttons will not access channels that have not been programmed into the TV's 2 memory. For more information about programming chan- nels into memory, see the section “Programming your TV's 3 Channel Memory” on the previous page. 2 The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel, enter it
ページ15に含まれる内容の要旨
Changing the TV's Channel Memory Your TV's memory determines the channels that are available using the t CHs but- tons. You can add channels to this memory or remove them from memory. If a chan- nel is removed from memory, you can tune to it with the number buttons, but you cannot tune to it with the t CHs buttons. If there are just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if there are two or more channel memorized, then the Add/Delete Chan
ページ16に含まれる内容の要旨
Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1 With the TV on, press the MENU button. then “Video” menu will appear. 2 The “Settings” item will be selected. Use the CVOLB buttons to turn Settings to Preset or Custom. 3 Use the t CHs buttons to select the video setting you wish to adjust. Descriptions of the video settings are on the next page. 4 Use the CVOLB buttons to adjust
ページ17に含まれる内容の要旨
Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps : 1 With the TV on, press the MENU button. then “Video” menu will appear. 2 Press the CVOLB buttons to set the “Settings” to ‘Preset’. The TV will remember the ‘Custom’ settings you had previously chosen. When you set “Settings” to ‘Custom’ again, your previous custom settings will be restored. 1 2 Video Video Settings : Cust
ページ18に含まれる内容の要旨
CHAPTER 4 Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Setting the Clock 1 With the TV turned on, press the MENU button until “Time” menu will be dis- played. 2 The “Set Clock” item will be selected. Press the CVOLB buttons to set the clock. If you hold down either CVOL or VOLB button, the corresponding numbers will change more quickly. 3 W
ページ19に含まれる内容の要旨
Setting the Off Timer If you enter a time in the “Off time” setting, your TV will automatically turn off at that time. Follow these instructions to set the “Off time”. 1 With the TV turned on, press the MENU button until “Time” menu will be dis- played. 2 Use the t CHs buttons to select “Off time” item. 3 If you hold down either CVOL or VOL B button, the corresponding numbers will change more quickly. 4 When the setting is correct, use the t CHs buttons to select another “Time” func- tion, or pr
ページ20に含まれる内容の要旨
Setting the Sleep Timer The sleep timer allows you to set an amount of time from 15 minutes to 120 minutes. TV will count down the amount of time you set, then turn itself off. To set the sleep timer: 1 With the TV turned on, press the MENU button until “Time” menu will be dis- played. 2 Use the t CHs buttons to select “Sleep timer” item. 3 Use the CVOLB buttons to set the sleep time. Each time you press VOL, you step between the available sleep times : 15min, 30min, 45min, 60min, 90min, or 120m
