ページ1に含まれる内容の要旨
Operating Instructions
Wide Projection Television
Model No. TX-47P800H
Manufactured under license from BBE
Sound,Inc.
Licensed by BBE Sound,Inc.under
USP4638258, 5510752 and 5736897.
BBE and BBE symbol are registered
trademarks of BBE Sound,Inc.
Please read these instructions before operating your set and retain
them for future reference.
TQBC0542
ページ2に含まれる内容の要旨
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Wide Projection television set. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the Model Number and Serial Number of your set in the space provided on the rear cover of these Instructions. Visit our Panasonic Web Site
ページ3に含まれる内容の要旨
Warnings and Cautions Warnings Unplug the power cord in the DO NOT use this unit near event of any malfunction water. (Near a bath tub, etc.) (screen goes blank, no sound, odd sounds, smoke or unusual odors coming from the unit). Unplug the power cord if foreign matter or water falls into the unit, or if the unit is dropped or the cabinet is damaged. DO NOT place any of the DO NOT use if the power cord following on the unit: or power plug is damaged, or if Flower vases, flower pots, t
ページ4に含まれる内容の要旨
Warnings and Cautions Cautions Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the Wide Projection TV screen. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode. Note: The permanent after-image on the Wide Projection TV screen resulting from fixed image use After-images appear is not an operating defect and as such is not covered by the Warranty. This prod
ページ5に含まれる内容の要旨
Before Operating This Set Safety Precaution Securing the casters Please take safety precautions to To prevent the set from tipping forward, turn the two casters on prevent the unit form falling over. the front of the TV so they face forward, as shown in the picture. The unit may fall over during earthquakes, or if someone stands on or shakes the TV. Fixing to a wall Use a strong rope or a chain to fasten the TV firmly to a strong support such as a wall or a pillar. Connecting the Aerial Cable
ページ6に含まれる内容の要旨
Before Operating This Set Connecting the Plug to the Wall Outlet Notes: • Main plug types vary between countries. The main plug shown at left may therefore not be the type fitted to your set. • The On/Off switch on this model does not full disconnect the TV from the mains supply. How to Turn the Power On Power Indicator Power OFF No light: Power OFF condition Note: Even when the Power Switch is "OFF", the TV set will still consume a small amount of power. Power Indicator Push the Power switch
ページ7に含まれる内容の要旨
Location of Controls Controls and Terminals on the TV TV/AV STR F AV3 IN S-VIDEO VIDEO MONO L AUDIO R S-VIDEO Y Y VIDEO MONO MONO PB MONO PB L PR PR AUDIO R MONITOR AV1 I COMPONENT I COMPONENT OUT IN AV2 IN AV4 IN Item Function Refer to Item Function Refer to No. Page No. Page TV/AV Selection 10 Headphones Jack 5 Aerial Terminal (RF In Terminal) 5 AV3 Input Terminals 5 Monitor Output Terminals 9 Power Switch 10 AV1 Input Terminals 8 STR 10 AV2 Input Terminals 8 Function Selection 10
ページ8に含まれる内容の要旨
Connections How to connect the “AV1, 2, 3 or 4” Input Terminals Connect VCRs and other peripheral equipment (VHS VCR) Audio Video OUT OUT RL S-VIDEO S-VIDEO Y Y VIDEO VIDEO MONO MONO PB MONO PB VIDEO L MONO PR AUDIO PR L AUDIO R AUDIO MONITOR AV1 I COMPONENT I COMPONENT R OUT IN AV2 IN AV4 IN AV1 IN (Super-VHS VCR) Audio Video S Video OUT OUT RL OUT S-VIDEO S-VIDEO Y Y VIDEO VIDEO MONO MONO PB MONO PB VIDEO L MONO PR PR AUDIO L AUDIO R AUDIO MONITOR AV1 I COMPONENT I COMPONENT R OUT IN AV2 IN AV
ページ9に含まれる内容の要旨
Connections How to connect the DVD Input Terminals DVD Player Audio DVD(Y-PB-PR) OUT OUT R L PR PB Y S-VIDEO Y Y Y VIDEO MONO MONO PB MONO PB MONO PB L L PR PR AUDIO AUDIO R PR R MONITOR AV1 I COMPONENT I COMPONENT OUT IN AV2 IN AV4 IN Notes: • The AV4 audio signal is common for both AV4 and DVD input signal terminals. • The DVD signal input terminal takes priority over the AV4 video signal input terminal. • Similar connection are available at the COMPONENT VIDEO input 2 terminal. How to conn
ページ10に含まれる内容の要旨
General Operation TV/AV Selection TV/AV STR F Press to select TV, AV1, AV2, AV3 and AV4 input signal modes sequentially. Volume Up (+) / Programme Number Up ( ) Power switch Volume Down (-) / Programme Number Down ( ) STR Picture Menu (see page 12, 24) Used to store tuning and other function settings. Also used to start the menu demonstration. Sound Menu (see page 12, 26) Function selection Set up Menu (see page 13, 23) Displays the on screen display functions, use repeatedly to select
ページ11に含まれる内容の要旨
General Operation Note: Power (Stand-by) (see page 6) • It is also possible to turn the TV set on from STANDBY The TV set must first be plugged into the wall mode by pressing the “Direct Programme Number outlet and turned on at the power switch. Selection” Buttons (0-9) and the “Programme Number Press this button to turn the TV set On from Up or Down” Button, either on the set or on the Standby mode, press it again to turn the TV set Remote Control. OFF to Standby mode. Sound Mute Pre
ページ12に含まれる内容の要旨
On-Screen menu Display from Remote Control To PICTURE adjust menu (see page 24) PICTURE PICTURE MENU STANDARD CONTRAST BRIGHTNESS SOUND COLOUR SHARPNESS NTSC-TINT SET UP C. TEMP STANDARD TV/AV PICTURE P-NR AUTO AI ON TV/TEXT INDEX HOLD F.P . SCAN MODE PROGRESSIVE 100Hz/ CH SEARCH STILL PROGRE 1 2 3 SURROUND To SOUND adjust menu 45 6 (see page 26) ASPECT 78 9 SOUND MULTI MENU MUSIC PIP VOLUME 0 BASS TREBLE BALANCE HEADPHONE VOL. BBE ON SURROUND OFF DVD REC-VCR To HELP MENU N HELP MENU STR HELP
ページ13に含まれる内容の要旨
On-Screen menu Display from Remote Control To TUNING MENU (see page 15) TUNING MENU CH SELECT POSITION SYS SELECT NZ/INDONES AUTO TUNE MANUAL TUNE SOUND SYS 5. 5 MHz COLOUR SYS AUTO FINE TUNE SKIP OFF To SETUP MENU (Other than Australia) (see page 23) SETUP MENU TUNING MENU TELETEXT FASTEXT SYS SELECT AUSTRALIA OFF TIMER OFF AUTO TUNE CH COLOUR SET MANUAL TUNE CHILD LOCK OFF SOUND SYS 5. 5 MHz BLUE BACK ON COLOUR SYS AUTO ILLUMINATION ON FINE TUNE FLICKER REDUC. ON SKIP OFF Press
ページ14に含まれる内容の要旨
Convergence Adjustment Convergence Adjustment mode Prior to adjustment, tune the broadcast signal to the video input signal and operate the set for more than 60 minutes. If the location or direction of the set is changed or moved, the display may be out of alignment. If necessary, carry out the following procedures once with PAL signal Vertical centre marker and again with the NTSC signal. Horizontal centre marker SET UP 1 SETUP MENU Press to display the Setup Menu. 3D-COMB ON TEXT SELECT ENGL
ページ15に含まれる内容の要旨
Convergence Adjustment Convergence 2 Adjustment for RED and BLUE This function adjust the convergence of the side part of the screen. SELECT Press to select the CONVERGENCE 2. ACCESS RETURN TV / AV - EXIT Press to access to the function. CONVERGENCE 1 CONVERGENCE 2 ACCESS Press the Number button on the Remote Control to select TV/TEXT F.P . INDEX HOLD the position which you would like to adjust. 100Hz/ CH SEARCH STILL PROGRE (Example) Position 1 is selected. 1 2 3 SURROUND 2 3 4 5 6 1 2
ページ16に含まれる内容の要旨
Tuning Channels 2 1 Select the “POSITION” or the “DIRECT” (Other than Australia) CH SELECT Press to select the “CH SELECT (Channel Select) ” Mode. TUNING MENU CH SELECT POSITION Press to select the “POSITION” or the “DIRECT”. SYS SELECT NZ/INDONES AUTO TUNE Setting range when the “POS.” (Position) has been selected: MANUAL TUNE Position 0-99 SOUND SYS 5. 5 MHz Setting range when the “DIRECT” has been selected: Channel 0-125 COLOUR SYS AUTO FINE TUNE The channel select indicator will chang
ページ17に含まれる内容の要旨
Tuning Channels Channel Allocation • CATV (USA CATV) channel numbers as recommended by the joint EIA/NCTA Engineering committee and published as EIA INTERIM STANDARD No.6-CABLE TELEVISION CHANNEL IDENTIFICATION PLAN-MAY 1983. • The receiving channels are as follows; SYS SELECT CHINA HK/UK ASIA/M.EAST NZ/INDONES AUSTRALIA E.EUROPE SPECL VER AMERICA CATV JAPAN CH DISPLAY RECEIVE CHANNEL 0 – – – – – – – – – – 1 1 – – 1 0 1 1 – 1 1 2 2 – 2 2 1 2 2 2 2 2 3 – 2 4 – 3 5 – 4 6 – 5 7 – S2 – 11 – 11 11
ページ18に含まれる内容の要旨
Tuning Channels Automatic Tune This TV uses automatic tuning to determine whether or not the TV can receive a broadcast signal which is being sent, and automatically prepares so that the channel selection can respond to both the position select and direct select modes. Before Automatic Tune, Channel Select and Regional System must already be set (Refer to pages 16). AUTO TUNE 1 TUNING MENU Press to select the “AUTO TUNE”. AUSTRALIA SYS SELECT Press to access to the “AUTO TUNE”. AUTO TUNE ACCES
ページ19に含まれる内容の要旨
Tuning Channels Manual Tune Before Manual Tune, Channel Select and Regional System must already be set (Refer to page 16). MANUAL TUNE 1 TUNING MENU 1 Press to select the MANUAL TUNE. SYS SELECT AUSTRALIA AUTO TUNE Press to access to the MANUAL TUNE. ACCESS MANUAL TUNE SOUND SYS 5. 5 MHz COLOUR SYS AUTO FINE TUNE SKIP OFF 2 Press to select the desired Programme Number. Press to select the higher or lower channel. Search Start. 29 CH 12 When a station is found. PROGRAMME - /+ SEARCH - /+
ページ20に含まれる内容の要旨
Tuning Channels Fine Tuning Under normal reception conditions this function is not required or necessary. However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the picture and sound quality. Press to select the FINE TUNE. TUNING MENU 1 SYS SELECT AUSTRALIA Press until the clear picture is received. AUTO TUNE MANUAL TUNE SOUND SYS 5. 5 MHz COLOUR SYS AUTO FINE TUNE STR 2 SKIP OFF Press to store the FINE TUNE. This stores the FINE TUNE to
