ページ1に含まれる内容の要旨
COLOUR TELEVISIONS
NICAM STEREO
24”, 25”, 26”, 28”, 29”, 32”, 33”
Operating Instructions
ページ2に含まれる内容の要旨
List of contents Special features 2 Safety instructions 3 Getting started 4 Aerial connection 4 Switching on 4 Battery fitting 4 1 Control unit 5 Front and rear panel 5 External connections table 6 Remote control 6 Using the TV 7 TV controls 7 Manual tuning 8 Automatic tuning 9 Child lock 9 Program table 10 TV setup 11 Sound menu 11-12 Picture menu 13 Features menu 14 Picture format 15 PIP Operation 16 Using teletext 17-18 Connecting external equipment 19-23 Help and service tips 24 Technical sp
ページ3に含まれる内容の要旨
Television Thank you for buying this television which is designed to give you many years of satisfactory service. You may already be familiar with using a television but do please take time to read these instructions. They are designed to familiarise you with the unit’s many new features and to ensure you get the very best out of your purchase. Special features • Your TV can receive stereo channels directly (NICAM optional). • Automatic tuning system with country selection. • 100 Programme Mem
ページ4に含まれる内容の要旨
Safety is Important Your safety and the safety of others is important. Please, therefore, ensure you read the Safetyinstructions before you operate this television. Safety instructions Read all the safety instructions before first use of your TV. ! • Position the television so that direct light does not fall on the screen. Excessive light will cause a washed out effect. • Position the power supply lead and other leads so that they are not likely to be walked on or pinched by things placed on or
ページ5に含まれる内容の要旨
Getting started Please Note Remove your Television carefully When not in use disconnect the plug from the box. You may wish to from the mains power supply. store the packaging for future use. Press the Power button on the front of the TV . The In the box standby indicator will illuminate. Inside your this package you should have: 7 • Television Press a Numeric button or the • Remote control Program up or Program down • User guide button on the remote handset or • AAA batteries x 2 Program
ページ6に含まれる内容の要旨
Control Unit Front Panel Program Down/Up button P- P+ Volume Down/Up button. V- V+ 5 General Program ON/OFF switch Stand by (Depends on model) Stand by indicator External Connections: (Front or side) (External connections: (Rear) AV1 scart Right audio RCA (Red) AV2 scart Left audio RCA/Mono RCA (White) AV3 scart (optional) Video RCA (Yellow) S-Video connection Aerial socket Headphone socket Power cable Optional SUBWOOFER You may wish to connect R audio amplifier or any similar devices to audio A
ページ7に含まれる内容の要旨
PP MENU P- External connections table Picture tube 24” 25” 26” 28” 28” 29” 32” 33” size/typee 16:9 4:3 16:9 4:3 16:9 4:3 16:9 4:3 AV1 Scart STD. STD. STD. STD. STD. STD. STD. STD. STD. STD. STD. STD. STD. AV2 Scart STD. STD. STD. AV3 Scart OPT. OPT. OPT. OPT. OPT. OPT. OPT. OPT. Headphone OPT. OPT. OPT. OPT. OPT. OPT. OPT. OPT. socket Audio/Video OPT. OPT. OPT. OPT. OPT. OPT. OPT. OPT. RCA S-Video OPT. OPT. OPT. OPT. OPT. OPT. OPT. OPT. socket 6 Back Audio OPT. OPT. OPT. OPT. OPT. OPT. OPT. OPT.
ページ8に含まれる内容の要旨
PP Using the TV Turning on for the first Volume Press the Volume + or Volume - time and Tuning button on the TV or the Vol or When you first turn your TV on, Vol button on the remote control. “ Language” menu willl appear. To search on the languages, use the A sound level bar will appear on the Program up or Program down. screen. Volume up or Volume down butttons Mute and choose your desired language and OK/Z To mute the sound press the Mute press “OK/Z” button. button on the remote control.
ページ9に含まれる内容の要旨
MENU Press the AV button again to return In the Setup menu select PROG AV to TV . NO and change to P1 using the Program down button to select it and the Volume up Tuning the television button to change it. There are two ways of tuning your television: Manual, where you control the tuning process Starting with Program 1, tune or in the first channel as follows: Autoprogram where the television does it all automatically. Use the Program down button Please Note to select SEARCH. If the TV is set t
ページ10に含まれる内容の要旨
MENU Use the Program down button to Tuning with channel numbers Enter the SETUP menu by pressing select AUTOPROGRAM and the blue button. press the OK/Z button. A list of OK/Z countries will appear. Select Press the OK/Z button to enter the the desired country using CHANNEL row. OK/Z Program and Volume buttons. Use the OK/Z button to select “S” for cable channels and OK/Z When you are sure the aerial is “C” for terrestrial broadcast. connected properly press the OK/Z button. Autoprogam will Us
ページ11に含まれる内容の要旨
MENU MENU Program Table Once you have tuned in all the channels you Please Note want, you can change their programme Some TV channels may send their names with teletext transmission. In this number, if required, and name them. case their names will be automatically To enter the PROGRAM TABLE shown on the name line. menu press the Menu button and select PROGRAM TABLE and OK/Z To move the programmes press the OK/Z button or press You can move the programmes around the directly the Yellow button.
ページ12に含まれる内容の要旨
MENU MENU MENU Volume TV set up Sets default volume using the Volume up The TV set up is accessed through a menu and down buttons. system. To save your settings, select STORE and press the OK/Z button. Once you have stored your set up, this is the STOREDwill be displayed. Press set up the TV will default to when you switch the Menu button to go back to it on. the previous menu. OK/Z To enter the MAIN menu press the Menu button. Once in the MAIN menu use the Balance Program up and Program down S
ページ13に含まれる内容の要旨
MENU MENU Sound mode Dynamic Bass (optional) You can select NORMAL, SPATIAL or DOLBY VIRTUAL (optional)using the Set DYNAMIC BASS to ON if you Volume up/down buttons or mix button. wish to deepen the bass sound specifically. SPATIAL sound is an ‘expanded stereo’. It gives the impression that the two speakers in the TV are further apart than they really are. Subwoofer (optional) A sub woofer speaker can be fitted DOLBY VIRTUAL is based on Dolby Pro within the TV case as an option Logic decoding
ページ14に含まれる内容の要旨
MENU Equalizer Picture menu (Green button) EQUALIZER PICTURE BRIGHTNESS MUSIC CONTRAST SPORTS COLOUR CINEMA SHARPNESS SPEECH CTI ON USER 0.1 0.5 1.5 5 10 DDVa ON COLOUR TEMPERATURE NORMAL STORE BACK BACK In this menu are a series of preset equalizer The picture menu allows you to set up the settings for different types of sound output. following: There are five music settings - MUSIC, BRIGHTNESS SPORTS, CINEMA, SPEECH and USER CONTRAST mode. COLOUR 13 USER allows you to set your own sound S
ページ15に含まれる内容の要旨
MENU P- Language Select BRIGHTNESS, There are many languages available for the On CONTRAST, COLOUR and Screen Displays (OSD). SHARPNESS using the Program up/down buttons. OK/Z Press the OK/Z button to select the language list. Change the settings with the Volume up/down buttons. Press the Program down button to page through all the languages and To save your settings, select STORE OK/Z to select. OK/Z and press the OK/Z button. STORED OK/Z will be displayed. Press the Menu button to go back to t
ページ16に含まれる内容の要旨
4:3 Sets: Picture format This allows you to select the picture size on 4:3, is the screen format of 25”, 28”, 29” corresponding to the scren type widescreen and 33” TV sets But you can change of your TV: the picture format to 16:9 to able Avaible formats for widesereen TV sets are to watch the inputs in 16:9 format, i.e. 16:9, 4:3, zoom, Letterbox, Subtitle and some broadcasts and DVD’s. Panaroma. Avaible formats of 4:3 TV sets are 4:3 and 16:9. The formats of the broadcasts (4:3 or 16:9) you
ページ17に含まれる内容の要旨
P- PIP OPERATION (OPTIONAL) DOUBLE WINDOW STOP 2 Tuner PIP function allows you to watch If you press the PAP button the PAP 2 programmes or other inputs like DVD, double window function will be VCR or satellite receiver at the same time displayed by putting the PIP through its PIP window. window on the half of the main It includes lots of functions like, SWAP, picture. SIZE, POSITION, ZAPP and DOUBLE WINDOW. On and off P 100 Press the PIP button to switch on PIP the PIP picture. Press again to
ページ18に含まれる内容の要旨
Using T eletext Teletext is an information system that displays TV/text mix text on your TV screen. Using the teletext To view a page of text whilst MIX control buttons you can view pages of watching a TV programme press INPUT information that are listed in the teletext theMix button. The text will be index. superimposed over the TV programme. Please Note MIX No on screen display is available in text mode. Press the Mix button again to return INPUT The contrast, brightness and colour cannot
ページ19に含まれる内容の要旨
Page hold To reveal information If the page of text you have selected Press the Rev button to reveal contains sub pages, these sub pages concealed information (quiz answers etc.). will automatically be displayed in order with a delay to allow you to read the page. Press the Rev button again to conceal the information again. To stop the move to the next sub page press the Stop button. STOP Clock will appear in the top left hand Press the Sub button, whilst corner. watching a TV program , to dis
ページ20に含まれる内容の要旨
Connecting external equipment Please note: Headphones (optional) You can connect a RGB external equipment The headphones must have an impedance of via Scart 1. It is necessary to you use full between 8 and 32 ohms and have a 3.5 mm Scart cable for this purpose. stereo jack plug. Select the video outputs of external device Plug the headphone jack into the headphone by using its menu to RGB if it’s available. socket of the TV. Via RCA lead (optional) Make sure the TV and video recorder are both sw
