ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Instructions Getting to know your camera Use this camera in the following order. Thank you for buying a Samsung Digital Camera. To use this camera with a PC, install the Prior to using this camera, please read the user manual thoroughly. Set up the Software application software fi rst. After this has If you require After Sales service, please bring the camera and the cause been done, the stored images in the of the camera malfunction (such as battery, Memory card etc.) to the A/S camera
ページ3に含まれる内容の要旨
DANGER WARNING DANGER indicates an imminently hazardous situation which, if not WARNING indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. avoided, could result in death or serious injury. Do not attempt to modify this camera in any way. This may result in fi re, Do not use the fl ash in close proximity to people or animals. Positioning injury, electric shock or severe damage to you or your camera. Internal the fl ash too close to your sub
ページ4に含まれる内容の要旨
CAUTION Contents CAUTION indicates a potentially hazardous situation which, if not 007 Package Contents READY avoided, may result in a minor or moderate injury. 007 Included Contents 007 Sold Separately Leaking, overheating, or burst battery could result in fi re or injury. 008 Identifi cation of features – Use battery with the correct specifi cation for the camera. 008 Front & Top – Do not short circuit, heat or dispose of battery in fi re. 009 Back – Do not insert the battery with the polarities
ページ5に含まれる内容の要旨
Contents 027 Things to watch out for when taking 049 E (Effect) button: Image editing 049 Colour pictures 050 Sharpness 028 Focus lock 050 Contrast 028 Using the camera buttons to set the 050 Saturation camera 051 Using the LCD monitor to adjust the 028 POWER button camera settings 029 Shutter button 052 Command Lever 029 Zoom W/T Lever 052 Flash Intensity 031 Command Lever 053 Quality 031 How to use the Command lever mode 053 ACB 032 Function Description / Info / Up button 054 OIS (Optical im
ページ6に含まれる内容の要旨
Contents 079 Copy To Card 062 Play & Pause / Down button 063 Left / Right / MENU / OK button 080 Sound menu 063 Print button 080 Sound 080 Volume 063 Delete button 080 Start up Sound 064 E (Effect) button: Resize 080 Shutter Sound 065 E (Effect) button: Rotating an image 081 Beep Sound 065 E (Effect) button: Colour 081 AF Sound 066 E (Effect) button: Image editing 081 Self Portrait 066 ACB 082 Setup menu 066 Red eye removal 082 Display 067 Face Retouch 082 Language 067 Brightness control 082 S
ページ7に含まれる内容の要旨
Contents 091 PictBridge PRINT 092 PictBridge: Picture Selection 092 PictBridge: Print Setting 093 PictBridge: Reset 093 Software notes SOFTWARE 094 System requirements 094 QuickTime Player 7.5 : H.264(MPEG4. AVC) playback Requirements 095 About the software 096 Setting up the application software 098 Starting PC mode 100 Removing the removable disk 101 Samsung Master 104 Setting up the USB Driver for MAC 104 Using the USB Driver for MAC 105 Specifi cations APPENDIX 107 Important notes 109 Warnin
ページ8に含まれる内容の要旨
Package Contents Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Parts and accessories illustrated below may differ from exact appearance. Included Contents User manual, Camera Camera strap Rechargeable battery AC adapter / USB cable Product warranty Software CD (see p.95) Sold Separately SD/SDHC/MMC Remote control Camera
ページ9に含まれる内容の要旨
Identifi cation of features Front & Top Zoom T Lever (Digital zoom) Zoom W Lever (Thumbnail) Mode dial POWER button Speaker Flash Microphone AF sensor/ Self-timer lamp Remote control sensor Lens HDMI connection terminal HDMI connection terminal note To connect to the HDMI connection terminal, use the HDMI cable only. 008
ページ10に含まれる内容の要旨
Identifi cation of features Back Shutter button Camera status lamp LCD monitor Command Lever USB / AV / DC terminal Fn / Delete button 5-function button Play mode / Print button E (Effect) button Camera strap 009
ページ11に含まれる内容の要旨
Identifi cation of features Bottom 5 Function button Memory card slot Function Description / Information / Up button Flash / Self-timer / Left button Right button MENU / OK button Battery holder Macro /Play & Pause / Down button Battery chamber cover Battery chamber Tripod socket 010
ページ12に含まれる内容の要旨
Identifi cation of features Self-timer lamp Icon Status Description When the USB cable is The lamp blinks and turns off when the printer inserted to a printer is ready to print a picture. – For the fi rst 7 seconds, the lamp blinks at 1 second intervals. When the printer is printing The lamp is off. Blinking – For the fi nal 3 seconds, the lamp blinks quickly The lamp turns on. at 0.25-second intervals. (The camera is focused on the subject) When the AF activates For the fi nal 2 seconds, the l
ページ13に含まれる内容の要旨
Connecting to a power source You should use the rechargeable battery SLB-10A supplied with the Recording Conditions camera. Be sure to charge the battery before using the camera. time SLB-10A rechargeable battery Specifi cation Approx. 125 Using the fully charged battery Movie MIN 640x480 image size 30fps frame rate. Model SLB-10A Type Lithium Ion These fi gures are measured under Samsung’s standard conditions and Capacity 1050mAh shooting conditions and may vary depending on the user’s met
ページ14に含まれる内容の要旨
Connecting to a power source Connecting the AC adapter with the USB cable can be used as an Important information about USB cable usage. AC cable, and you can charge the rechargeable battery with the AC Use a USB cable with the correct specifi cation. cable. If the camera is connected to the PC through a USB hub: connect the camera directly to the PC. If the camera and other devices are connected to the PC at Using an AC cable: the same time: remove other device. Connect the AC adapter to
ページ15に含まれる内容の要旨
Connecting to a power source How to charge the rechargeable battery Charging LED of the AC Adapter Charging LED Being Charged Red LED is on Charging is complete Green LED is on Charging error Orange LED is off or blinking – If you insert the fully discharged battery to charge it, do not turn on the camera at the same time. This is because of the low battery capacity. Charge the battery for more than 10 minutes before using the camera. – Do not use the fl ash frequently or take a movie clip wi
ページ16に含まれる内容の要旨
Inserting the battery Inserting the memory card Insert the battery as shown. Insert the memory card as shown. – If the camera does not turn on - Turn off the camera’s power after you have inserted battery, before inserting the memory card. please check whether the battery - Have the front label of the is inserted with the correct polarity memory card facing toward the (+/-). front of the camera (Lens) and the – When the battery chamber cover card pins toward the back of the is opened, do
ページ17に含まれる内容の要旨
Instructions on how to use the memory card Be sure to format the memory card (see p.84) if you are using a newly If the memory card is subjected to any of the following, the recorded data purchased memory card for the fi rst time, if it contains data that the camera may become corrupted: cannot recognise, or if it contains images captured with a different camera. – When the memory card is used incorrectly. Turn off the camera power whenever the memory card is being inserted or – If the pow
ページ18に含まれる内容の要旨
Instructions on how to use the memory card The camera can use SD/ SDHC Memory Cards and MMC (Multi When using a 1GB SD memory, the specifi ed shooting capacity will be Media Cards). as follows. These fi gures are approximate as image capacities can be affected by variables such as subject matter and memory card type. Recorded Super Card pins Fine Normal 60FPS 30FPS 15FPS image size Fine 147 285 404 -- - Write protect 168 314 442 -- - switch -- - 203 368 529 Label Still -- - 212 375 538
ページ19に含まれる内容の要旨
When using the camera for the fi rst time Charge the rechargeable battery fully before using the camera for the fi rst Setting up the date, time and date type time. 1. Select the [Date&Time] menu by When the camera is turned on for the fi rst time, a menu will be displayed pressing the Up/Down button and press DISPLAY in the LCD monitor to set date, time and language. This menu will not be the Right button. Language + Seoul, Tokyo displayed again after setting up the date, time and langua
ページ20に含まれる内容の要旨
LCD monitor indicator No. Description Icons Page The LCD monitor displays information about the shooting functions and selections. 9 ISO p.44 1 3 2 10 White Balance p.44~45 Face Detection · Self Portrait 1 1 11 p.46~47 4 ) · Blink Detection ·Smile Shot aa 5 12 Date/Time 2009/01/01 PM 01:00 p.83 bb ( 1/30 F3.3 1/30 F3.3 6 / d cc 13 Saturation/Colour p.50/p.49 * 7 & / e 14 Contrast/Face Retouch p.50/p.22 8 ^ f 9 Sharpness/Photo Style p.50/p.49/ /
