ページ1に含まれる内容の要旨
Introducing Cisco VT Advantage
Congratulations on your purchase of Cisco VT Advantage.
Cisco VT Advantage brings video telephony functionality to your
Cisco IP Phone.
This guide provides information and instructions for installing
Cisco VT Advantage and the Cisco VT Camera. It includes these topics:
• Getting Started
Installing Cisco VT Advantage
Using Your Cisco VT Camera
Using Cisco VT Advantage
Regulatory Compliance and Safety Information
Cisco One-Year Limited Hardware Warrant
ページ2に含まれる内容の要旨
Cisco VT Camera Package Review the following list to make sure you have received all the necessary items to install Cisco VT Advantage. 1 Cisco VT Camera with attached USB cable 1 flexible camera base 1 privacy shade this Cisco VT Advantage Quick Start Guide See Figure 1 in the “How to Set Up the Cisco VT Camera” section on page 5 for an illustration of the Cisco VT Camera components and connections. If you are missing any items, contact your system administrator before continuing
ページ3に含まれる内容の要旨
Administration Guide, available at this URL: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon /index.htm Verify the following before you begin installing Cisco VT Advantage and the Cisco VT Camera: Ensure that your Cisco IP Phone is connected to your corporate telephony network. If your Cisco IP Phone is powered on and you can make voice calls, then you are properly connected. Ensure that your Cisco IP Phone is video enabled. If the LCD screen on your Cisco IP Phone disp
ページ4に含まれる内容の要旨
Ensure that your PC meets the following specifications: PC Feature Minimum Requirement Operating system Windows 2000 Professional with service pack 3.0 or later Windows XP Professional, with service pack 1.0 or later CPU 1.0 GHz or higher Pentium III or compatible processor (Streaming SIMD Extensions support required) 1.4 GHz or higher Pentium III or compatible processor recommended System memory 256 MB minimum Free disk space 40 MB USB port At least 1 free USB (1.1 or 2.0
ページ5に含まれる内容の要旨
Installing Cisco VT Advantage Make sure you have read the “Getting Started” section on page 1 before you begin installing Cisco VT Advantage. Installation Sequence You must follow this sequence when installing Cisco VT Advantage: 1. First, remove the Cisco VT Camera parts from the packaging and set up the camera. See the “How to Set Up the Cisco VT Camera” section on page 5. 2. Second, install the Cisco VT Advantage software. See the “How To Install Cisco VT Advantage” section on page 9. H
ページ6に含まれる内容の要旨
Figure 1 Cisco VT Camera Components and Connections 3 5 2 6 1 4 1 Cisco VT Camera 4 Flexible camera base 2 USB cable and connector 5 Opening on the bottom of the camera 3 Privacy shade (attaches to the 6 Tab on the flexible camera base camera) (snaps into the opening on the bottom of the camera) 6 105775
ページ7に含まれる内容の要旨
Procedure Caution Do not connect the camera to your PC until prompted to do so during the installation of the Cisco VT Advantage software. 1. Remove the camera, privacy shade, and the flexible camera base from the packaging. 2. Mount the camera on the flexible camera base: a. Insert the protruding black plastic tab on the camera base into the opening on the bottom of the camera. b. Snap the camera into place. The camera will then be firmly connected to the flexible camera base. 3. Attach th
ページ8に含まれる内容の要旨
4. Position the camera on top of your PC monitor or flat panel screen, adjusting the flexible camera base as necessary. See Figure 2. Figure 2 Cisco VT Camera Placed on PC Monitor Caution DO NOT CONNECT THE CAMERA TO THE PC. 5. Now go to the “How To Install Cisco VT Advantage” section on page 9. 8 105777
ページ9に含まれる内容の要旨
How To Install Cisco VT Advantage Your system administrator will likely provide you with instructions about how to obtain the Cisco VT Advantage software and user guide at your site. If you did not receive those instructions, contact your system administrator. Note Cisco VT Advantage supports only the Cisco VT Camera, and the Cisco VT Camera works only with the Cisco VT Advantage software. Procedure Note You must be logged into Windows with Administrator authority to install Cisco VT Adva
ページ10に含まれる内容の要旨
1. Close and Exit any open applications on your PC, and then start the Cisco VT Advantage installation program. 2. Follow the on-screen prompts to complete the installation. For more information about your Cisco VT Camera, see the “Using Your Cisco VT Camera” section on page 10. For more information about Cisco VT Advantage, see the “Using Cisco VT Advantage” section on page 12. Using Your Cisco VT Camera The camera is designed for optimal eye contact when placed on top of your PC monitor
ページ11に含まれる内容の要旨
Figure 3 Cisco VT Camera Features 1 2 3 4 5 1 Privacy shade 4 Focus ring 2 Ready light 5 Base 3 Lens 11 120113
ページ12に含まれる内容の要旨
Tips for Positioning Your Cisco VT Camera Place the camera in the middle of your PC monitor or flat panel screen, or on a table top, for optimal eye contact. Lift up the privacy shade. Pivot the camera up or down, left or right, for the best position. View live video to guide your focus adjustments. Rotate the focus ring (the black ring around the camera lens; see Figure 3) to get a sharp image. To learn how to to adjust various settings for your Cisco VT Camera, such as brightness a
ページ13に含まれる内容の要旨
Regulatory Compliance and Safety Information This section describes the regulatory compliance and safety information for the Cisco VT Camera. Regulatory Compliance The Cisco VT Camera meets the following regulatory compliance and safety standards: Specification Description Regulatory Products shall bear CE Marking indicating Compliance compliance with the 89/366/EEC and 73/23/EEC directives, which includes the following safety and EMC standards. Safety UL 60950 CAN/CSA-C22.2 No. 60950 E
ページ14に含まれる内容の要旨
Specification Description EMC FCC Part 15 (CFR 47) Class B ICES-003 Class B EN55022 Class B CISPR22 Class B AS/NZS 3548 Class B VCCI Class B CNS 13438 EN55024 EN50082-1 EN61000-6-1 EN6000-3-2 EN6000-3-3 14
ページ15に含まれる内容の要旨
FCC Class B Compliance This equipment has been tested and found to comply with the limits for a Class B Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generated, uses and can radiate radio frequency and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
ページ16に含まれる内容の要旨
Canada Class B Notice This Class ‘B’ digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe ‘B’ est conforme à la norme NMB-003 du Canada. Korea Class B Notice Warning This is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas. 16
ページ17に含まれる内容の要旨
Declaration of Conformity for the European Community, Switzerland, Norway, Iceland, Romania, and Liechtenstein With regard to Directives 73/23/EEC and 89/336/EEC, as amended by Directive 93/68/EEC English: This equipment is in compliance with the essential requirements and other provisions of Directives 73/23/EEC and 89/336/EEC as amended by Directive 93/68/EEC. Dansk: Dette udstyr er i overensstemmelse med de ufravigelige hensyn og andre bestemmelser i direktiv 73/23/EEC og 89/336/EEC so
ページ18に含まれる内容の要旨
Français: Cet appareil remplit les principales conditions requises et autres dispositions des Directives 73/23/EEC et 89/336/EEC, modifiées par la Directive 93/68/EEC. Íslenska: Þessir búnaður samrýmist lögboðnum kröfum og öðrum ákvæðum tilskipana 73/23/EBE og 89/336/EBE, með breytingum skv. tilskipun 93/68/EBE. Italiano: Questa apparecchiatura è conforme ai requisiti essenziali e altre disposizioni delle Direttive 73/23/EEC e 89/336/EEC modificate con la Direttiva 93/68/EEC. Nederlands:
ページ19に含まれる内容の要旨
Cisco VT Camera Suomalainen: Tämä laite on direktiivien 73/23/ETY ja 89/336/ETY (kuten muutettu direktiivissä 93/68/ETY) keskeisten vaatimusten ja määräysten mukainen. Svenska: Denna utrustning uppfyller de väsentliga kraven och andra villkor i direktiven 73/23/EEC och 89/336/EEC enligt ändringarna i direktiv 93/68/EEC. Cisco One-Year Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty peri
ページ20に含まれる内容の要旨
Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com. 1. Launch your browser, and go to this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm The Warranties and License Agreements page appears. 2. To read the Cisco Information Packet, follow these steps: a. Click the Information Packet Number field, and make sure that the part number 78-5235-03A0 is highlight
