ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
INDEX Getting Started............................................................................ 1 Contents of Package ........................................................................... 1 System Requirements ......................................................................... 1 General Precautions ............................................................................ 2 FCC Compliance and Advisory............................................................ 2 Camera Nomenclatu
ページ3に含まれる内容の要旨
Taking Pictures ......................................................................... 19 Previewing a Picture before it is taken............................................... 19 Taking a picture .................................................................................. 20 Adjusting the Exposure ..................................................................... 22 Setting the White Balance ................................................................. 23 Changing the Picture Re
ページ4に含まれる内容の要旨
Copying Flash Memory Images to a Memory Card ........................... 38 Formatting the Memory Card or Internal memory ............................. 39 Setting Your Camera for Printing ............................................. 40 Folders and Files ............................................................................... 40 DPOF Print Settings .......................................................................... 41 PRINT Image Matching ...........................................
ページ5に含まれる内容の要旨
Getting Started Getting Started Contents of Package All of the items shown below are included with your camera. Camera USB cable Video cable Strap Pouch Alkaline batteries Quick Start User's Guide CD-ROM (2 AA-size batteries) Guide System Requirements For Windows PC with processor better than MMX Pentium 166MHz Windows 98/98SE/2000/ME/XP Minimum 32MB RAM USB Port CD-ROM drive For Macintosh Mac Power PC or higher Mac OS 9.0 - 10.0 Minimum 32MB RAM USB Port CD-ROM drive 800x600 pixel
ページ6に含まれる内容の要旨
Getting Started General Precautions · Do not try to open the case of the camera or attempt to modify this camera in any way. High-voltage internal components create the risk of electric shock when exposed. The maintenance and repairs should be carried out by authorized service providers. · Do not fire the flash near eyes, human or animal. It may cause eye damage especially for children. · Do not use this camera with wet hands. Keep the camera away from water and other liquids. Moisture creates t
ページ7に含まれる内容の要旨
Getting Started Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. Camera Nomenclature Front Exposure sensor Viewfinder Flash Microphone Lens Self-
ページ8に含まれる内容の要旨
Getting Started Side DC IN terminal Video out terminal USB port Top Shutter button Mode dial Accessory Set-up Attaching the Wrist Strap · Follow the illustration to attach the wrist strap. Note: When carrying the camera by the strap, please don’t swing the camera on the strap. 4
ページ9に含まれる内容の要旨
Getting Started Using the Soft Case · Keep the camera in its soft case while it is not in use. · Be sure to insert the camera into the case, with the monitor screen facing down. 5
ページ10に含まれる内容の要旨
Preparing to Take Pictures Preparing to Take Pictures Battery Installation There are two ways to supply power to the camera. You can use batteries (AA Alkaline or CR-V3), or alternatively, you can use an AC adapter (DC3.3V/2.5A). If using Batteries, 1. Open the battery cover by pushing and sliding it to the side. 2. Check inscription on battery chamber for correct negative/ positive installation. 3. Install 2-AA alkaline batteries. 6
ページ11に含まれる内容の要旨
Preparing to Take Pictures 4. Close the battery cover. Low Battery Indicator Upon power up, the LCD monitor on the back of the camera shows the battery power status. Battery High Low Capacity Monitor Screen NOTE: · Never use manganese batteries, as they cannot supply sufficient power to support the camera’s operations. · Replace all the batteries at the same time to ensure a properly working camera; never mix old and new batteries. · Remove the batteries from the camera if you do not plan on
ページ12に含まれる内容の要旨
Preparing to Take Pictures If using the AC Adaptor Plug the adaptor into the DC-In jack (DC-IN 3.3V). Please make sure that you use an AC adaptor with the correct specification for the camera (DC3.3V/2.5A). NOTE: · Please be sure to turn off the power before connecting or disconnecting the adaptor. · The camera automatically switches over to AC adaptor powered operation whenever the AC adaptor is plugged into the camera. · It is recommend to use the AC adaptor to power the camera whenever con
ページ13に含まれる内容の要旨
Preparing to Take Pictures Date and Time Set-Up 1. You may set the date and time while in any mode. ( ) 2. Press the MENU button. 3. Press the RIGHT button ( ) until the SETUP MENU () appears. 9
ページ14に含まれる内容の要旨
Preparing to Take Pictures 4. Press the SET button to adjust the DATE & TIME. 5. Press the UP/DOWN ( / ) buttons to change the date or time. 6. Press the Set button to confirm your selection and move to the next date or time value. Use UP/DOWN button to change the display of date. A. YY/MM/DD B. MM/DD/YY C. DD/MM/YY 10
ページ15に含まれる内容の要旨
Preparing to Take Pictures Beep Sound Set-Up You may turn on/off the beep sound while in any mode. ( ) 1. Press the MENU button. 2. Press the RIGHT button ( ) until the SETUP MENU () appears. 3. Press the DOWN button ( ) to scroll to BEEP. 4. Press the SET button to enter the BEEP menu. 5. Press the UP/DOWN ( / ) buttons to set the beep sound. 6. Press the SET button to confirm your setting. Note: The default setting is “On”. 11
ページ16に含まれる内容の要旨
Preparing to Take Pictures Power Save Settings You may perform power save settings while in any Mode. ( ) 1. Press the Menu button. 2. Then press the RIGHT button until the SETUP MENU ( ) appears. 3. Press the DOWN button ( ) to POWER SAVE. 4. Press the SET button to enter the POWER SAVE menu. 5. Press the UP/DOWN buttons to adjust the setting. 6. Press SET again to confirm your setting. Note: The default setting is “1 minute”. 1 minute: The LCD screen on this camera will automati
ページ17に含まれる内容の要旨
Preparing to Take Pictures Note: If the camera is inactive for an additional minute, the camera will automatically power off. Press the POWER button to turn the camera back on. 3 minutes: The LCD screen on this camera will automatically turn off if there is no activity for three minutes. Pressing any button will illuminate the LCD. Note: If the camera is inactive for an additional minute, the camera will automatically power off. Press the POWER button to turn the camera back on. Off: This ca
ページ18に含まれる内容の要旨
Preparing to Take Pictures 4. Press the SET button to enter the QUICK VIEW menu. 5. Use the UP/DOWN button ( / ) to toggle between ON/OFF. 6. Press SET to confirm your selection. TV Out Signal Set-Up This camera can connect directly to a TV set. Please refer to “Viewing images on a TV set” on Page 44. It allows you to use the TV screen as your camera's LCD screen when shooting or replaying images. The Video output signal can be switched to NTSC or PAL to accommodate different signal systems.
ページ19に含まれる内容の要旨
Preparing to Take Pictures 3. Press the DOWN button ( ) to TV Out. 4. Press the SET button to enter the TV Out selection. 5. Use the UP/DOWN buttons ( / ) to toggle between NTSC and PAL. 6. Press SET to confirm your selection. Language Set-Up Use this feature to select the language for the LCD screen. You may perform the language setting in any Mode. ( ) 1. Press the MENU button. 2. Press the RIGHT button ( ) until the SETUP MENU appears. 15
ページ20に含まれる内容の要旨
Preparing to Take Pictures 3. Press the DOWN button ( ) to reach the LANGUAGE menu .. 4. Press the SET button to enter the LANGUAGE selection. 5. Use the UP/DOWN ( ) buttons to toggle / among the different options. 6. Press SET to confirm your selection. 16
