ページ1に含まれる内容の要旨
Camera 445 Visual Presenter
User Manual
[Important]
To download the latest version of Quick Start
Guide, multilingual user manual, software, or
driver, etc., please visit
http://www.dukcorp.com/audiovisual/products
“Downloads”
Dukane Audio Visual, 2900 Dukane Drive
St. Charles, IL 60174
866.280.4298 Fax: 630.584.5156
http://www.dukcorp.com/
090107-Rev
English - 0
ページ2に含まれる内容の要旨
Contents Copyright Information............................................................................................3 Chapter 1 Precautions........................................................................................4 Chapter 2 Package Content...............................................................................6 Chapter 3 Product Overview .............................................................................7 3.1 Relative position of the presenter and 445 .
ページ3に含まれる内容の要旨
7.16 I would like to resume the factory default setting (Factory Reset).......23 7.17 I would like to reduce the image noise (Noise Reduction) ...................24 7.18 I would like to set / change the password (Lock Down)........................24 7.19 Using a SD card.......................................................................................25 7.20 Computer-related functions ....................................................................25 7.20.1 I would like to insert a
ページ4に含まれる内容の要旨
Copyright Information © Copyrights Dukane Co. All rights reserved. Dukane is a trademark that is currently being registered Dukane Corporation Inc. Copying, reproducing or transmitting this file is not allowed if a license is not provided by Dukane Corporation Inc. unless copying this file is for the purpose of backup after purchasing this product. In order to keep improving the product, Dukane Corporation Inc. hereby reserves the right to make changes to product specifications wi
ページ5に含まれる内容の要旨
Chapter 1 Precautions Always follow these safety instructions when setting up and using the visual presenter: 1. Do not place visual presenter in tilted position. 2. Do not place the visual presenter on an unstable trolley, stand or table. 3. Do not use the visual presenter near water or source of heat. 4. Use attachments only as recommended. 5. Use the type of power source indicated on the visual presenter. If you are not sure of the type of power available, consult your dealer or local
ページ6に含まれる内容の要旨
EQUIPMENT. Note: This equipment has been tested and found to comply with the limits for a Class A or B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee
ページ7に含まれる内容の要旨
Chapter 2 Package Content 445 Quick Start Guide User Manual Remote control Remote Control Holder Base Installation Guide Extender Adapter VGA Cable USB Cable C-Video Cable Power Cord Microscope Adapter Appearance may vary with country/region. Padded Carry Bag Audio cable (Optional) English - 6
ページ8に含まれる内容の要旨
Chapter 3 Product Overview 8. Gooseneck 7. AF button 4. LED indicator 1. Lamp 3. Control panel 2. Remote sensor 9. Built-in Microphone kkkkkkk 5. Lens 6. DIP switch (Bottom) English - 7
ページ9に含まれる内容の要旨
3.1 Relative position of the presenter and 445 445 Presenter Document 3.2 Recommend distance * About 470 mm distance between camera and the desktop is recommended. English - 8
ページ10に含まれる内容の要旨
3.3 Incorrect use English - 9
ページ11に含まれる内容の要旨
Chapter 4 Installation and Connections 4.1 System diagram PC Projector Monitor Monitor PC Speaker (or an amplifier before connecting to the speaker) LCD TV SD Card PC Televisio n 4.2 Mounting the 445 on a desktop stand 1. Please set up the DIP Switch settings first. Refer to Chapter 5 “DIP Switch Settings” in this 445 user manual. 2. Please refer to the Base Installation Guide for installation instructions for all parts. 4.3 Connecting devices 4.3.1 Step 1: Plug in
ページ12に含まれる内容の要旨
4.3.2 Step 2: Connecting the components Connecting to a projector Connect the VGA OUT on the 445 to the VGA IN on the projector using the VGA cable. Connecting to a monitor Use VGA cable to connect VGA PASSTHROUGH connector on 445 to the VGA IN connector on a monitor. [Note] The VGA PASSTHROUGH connector only outputs VGA IN signals. Connecting to a TV 1. Using EXTENDER adapter and C-Video cable to connect EXTENDER of 445 to a C-Video of TV.
ページ13に含まれる内容の要旨
Use VGA cable to connect VGA IN connector on 445 to the VGA OUT connector on the computer Using the USB Cable Connect to USB port then install the supplied queue program. Using the EXTENDER adapter and RS232 Cable to connect EXTENDER of 445 to a RS232 of computer Connecting to speaker Speaker : Or connect to an additional amplifier before connecting to the speaker. 4.4 Start using the 445 Control Panel Remote Control When using the
ページ14に含まれる内容の要旨
4.5 Installing remote control holder Insert the holder over the gooseneck of the camera and push it down. 4.6 Installing driver and application queue (software) After installing the USB driver and application queue, you can use the following functions via the software: Control the 445. Capture and record images. Annotate the image, highlight important details and save it. 4.6.1 System requirements Operating MAC OS X Windows XP Windows Vista System v10.4.10, v10.
ページ15に含まれる内容の要旨
1. Download the [queue X.X.X +Driver] and its user manual. TM Please follow the user manual of queue for installation and operation. Chapter 5 DIP Switch Settings You have to turn the unit OFF and back ON for the setting to take affect. 5.1 Connecting to a projector or monitor 5.1.1 SXGA 60Hz output (default values): 5.1.2 XGA 60 Hz output 5.1.3 Special mode 5.1.4 HDTV 720P 60Hz output English - 14
ページ16に含まれる内容の要旨
5.2 Connecting to a TV 5.2.1 NTSC: America, Taiwan, Panama, Philippines, Canada, Chile, Japan, Korea and Mexico 5.2.2 PAL: Countries/regions not listed above. VGA output is not supported once C-Video output has been enabled. English - 15
ページ17に含まれる内容の要旨
Chapter 6 Control Panel/Remote Control and Setting Menu 6.1 Functions of control panel and remote control : OSD is not available at C-Video mode. [Menu] / [Rotate] / [PAN] / [Source] / [Record] / [Capture] / [Delete] / [PBP] / [Slide Show] functions are not available on the machine panel and the remote control. The below functions are listed alphabetically. Name Function Operation Turn on and off the visual presenter. Remote control / Control panel Move up, dow
ページ18に含まれる内容の要旨
6.2 Setting Menu Press [Menu] on the remote control or control panel to enter the setting menu; The bold underlined values in the following table are the defaults. rd 3 Level st nd 1 Level 2 Level Adjustment Descriptions Major Items Minor Items values Use the left and right arrow Focus 0~Max keys to adjust focal length on an object Normal/Slide/ Use the left and right arrow Mode Film/Microscope keys to select the image mode. Use the left and right arrow Photo/Text Photo
ページ19に含まれる内容の要旨
memory. Use the left and right arrow keys to select, and then press Format Yes/No [Enter] to format the data stored in the SD card (priority) or internal memory. Use the left and right arrow 1. Single keys to select the video capture Capture 2. Continuous mode. 3. Disable (Single/Continuous/Disable) 1. 1 hr Use the left and right arrow 2. 2 hr keys to set the capture time. Capture Time 3. 4 hr It only works when the 4. 8 hr capture mode is set to 5. 24 hr [continuous].
ページ20に含まれる内容の要旨
8. Suomi Finnish 9. Polski Polish 10. Italiano Italian 11. Português Portuguese 12. Svenska Swedish 13. Česky Czech Use the left and right arrow keys in the language option to select the preferred language. 1. XGA Based on different DIP switch 2. SXGA settings, different output modes 3. UXGA Output Mode are provided. Refer to Chapter 4. 720P 5 DIP “Switch Settings” in the 5. 1080P 4 user manual. Use the left and right arrow keys to turn the lock down Lock Down On/Off
