ページ1に含まれる内容の要旨
Using Advanced Software
Getting Ready Settings Viewing Images
the Camera Features Installation
This manual will show you how to use your FUJIFILM
DIGITAL CAMERA FinePix F700 correctly.
Please follow the instructions carefully.
( )
BL00247-201 1
ページ2に含まれる内容の要旨
Warning EC Declaration of Conformity To prevent fire or shock hazard, do not expose the unit to rain or moisture. We : ( ) Name Fuji Photo Film Europe G.m.b.H. to correct the interference by one or more of the following For customers in the U.S.A. Address: Heesenstrasse 31 measures: Tested To Comply — Reorient or relocate the receiving antenna. 40549 Dusseldorf, Germany With FCC Standards — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a c
ページ3に含まれる内容の要旨
Using Advanced Software Getting Ready Settings Viewing Images the Camera Features Installation Contents .............................................................................................. n Red-Eye Reduction + Slow Synchro 44 .......................................................................... ................................................................. Warning 2 Nomenclature 8 .................................................................................................
ページ4に含まれる内容の要旨
Preface Accessories included Test Shots Prior to Photography Notes on Electrical Interference h NP-40 Rechargeable Battery (1) h AC-5VW AC Power Adapter (1 set) For particularly important photographs (such as If the camera is to be used in hospitals or aircrafts, Soft case included weddings and overseas trips), always take a test please note that this camera may cause interference photograph and view the image to make sure that the to other equipment in the hospital or aircraft. For camera i
ページ5に含まれる内容の要旨
Nomenclature ✽ Refer to the pages in parentheses for information on using the camera features. Mode dial Fitting the rubber feet AUTO (P.38) Programmed auto (P.39) Rubber feet Movie (P.58) Shutter-priority auto (P.40) Scene Position (P.38) Aperture-priority auto (P.41) Manual (P.42) Fit the rubber feet before using this product. Self-timer lamp (P.52) Power switch (P.13) (USB,A/V) AF Auxiliary Light (P.23) socket Shutter button POWER switch/POWER lamp Viewfinder Window DC IN 5V Connecti
ページ6に含まれる内容の要旨
NP-40 Getting Ready 1 Getting Ready LOADING THE BATTERY AND THE MEDIA Close the battery cover. Compatible Batteries 4 Use only the special Rechargeable Battery NP-40. The use of other brands of rechargeable battery could cause faults or damage to the camera. h NP-40 Rechargeable Battery (1) ! The battery is not fully charged at shipment and must be fully Terminals charged before being used. ! Do not stick labels onto the battery as this could cause the Indicator battery to become jammed insi
ページ7に含まれる内容の要旨
Getting Ready CHARGING THE BATTERY SWITCHING ON AND OFF SETTING THE DATE AND TIME Slide the POWER switch to turn the camera on and DC IN 5V off. When you switch the camera on, the viewfinder 1 1 socket lamp lights (green) and the self timer lamp lights. In “q” mode, the lens extends and the lens cover opens. Because these actions involve precision mechanisms, you should take care not to obstruct the lens with your hand or fingers. Obstructing the lens will cause a malfunction or fault and the
ページ8に含まれる内容の要旨
Getting Ready CORRECTING THE DATE TIME AND CHANGING THE DATE ORDER SELECTING THE LANGUAGE Always press the “MENU/OK” button after you 1Press the “MENU/OK” button. 0 10 3 2 0 complete the settings. 2Press “d” or “c” to select “F” OPTION and 1 5 then press “a” or “b” to select “SET–UP”. 3Press the “MENU/OK” button. SELECTING THE LANGUAGE 1Press the “MENU/OK” button to display the 1 03 0 0 2 menu screen. 1 2Press “a”, “b”, “d” or “c” to select “SET–UP” from the “F” OPTION menu. 1
ページ9に含まれる内容の要旨
Getting Ready SETTING UP AND USING THE FinePix F700 CRADLE CP-FX700 Just by putting the camera in the cradle, you can ensure that your camera is always charged. The Connecting to a computer cradle will also automatically launch the “FinePixViewer” image viewing software when you switch Pressing the power switch on the cradle switches the cradle on. You can then display thumbnail lists of your photographed images on your computer the camera on. This initiates the connection to the for quick and
ページ10に含まれる内容の要旨
Using the Camera Using 2 the Camera BASIC OPERATION GUIDE You’ve read the chapter on getting ready and the camera is now set up and ready to take pictures. 0 DISP button “Using the Camera” describes the basic camera operations of “Taking Pictures”, then “Viewing Images” and “Erasing Images”. You can use this button to select the LCD monitor display. Photography: Switches the LCD monitor on and off or displays the framing guides. This section describes the camera’s functions. Playback: Switches
ページ11に含まれる内容の要旨
Using the Camera STILL IMAGE MODE ( ) SHOOTING STILL IMAGES AUTO MODE Using the LCD monitor or viewfinder, position the Set the Power switch to “q” 1 and set the Mode 0 1 0 2 subject at or near the center of the image. dial to “B” 2. To take pictures using the 1 5 viewfinder, press the “DISP” button 3 to switch the LCD monitor off. (Switching the LCD monitor off conserves power.) h Photography range: Approx. 60 cm (2.0 ft.) to infinity ! If the camera will not focus successfully on the sub
ページ12に含まれる内容の要旨
Using the Camera STILL IMAGE MODE ( ) SHOOTING STILL IMAGES AUTO MODE Viewfinder Lamp Display FOCUSING Display Status Because the focus mode is set to “AUTO (automatic recognition)” when the camera is shipped from Lit green Ready to shoot. the factory, the camera automatically recognizes and focuses on the subject at or near the center of Blinking green AF/AE in progress, camera shake warning or AF warning (Ready to shoot). the image. Blinking green and Recording to xD-Picture Card (Ready to s
ページ13に含まれる内容の要旨
Using the Camera STILL IMAGE MODE PLAYBACK MODE ( ) ( ) SHOOTING STILL IMAGES AUTO MODE VIEWING YOUR IMAGES PLAYBACK ( ) USING THE ZOOM OPTICAL ZOOM, DIGITAL ZOOM Single-frame Playback 0 1 2 0 You can zoom in and out by pressing the zoom 1Set the Power switch to “w”. buttons. 2Press “c” to scan forward through your images The digital zoom can be used with the “3”, “2” and “d” to scan backwards. and “1” quality mode setting. ! When you set the Power switch to “w”, your last shot is When zooming
ページ14に含まれる内容の要旨
Using the Camera PLAYBACK MODE PLAYBACK MODE ( ) ( ) VIEWING YOUR IMAGES PLAYBACK ERASING IMAGES ERASE FRAME Set the Power switch to “w”. Single-frame Playback 1 Press the “BACK” button to cancel playback zoom. Playback Zoom Panning 1Press the “MENU/OK” button during playback to 1 0 2 0 2 display the menu. 2Press “d” or “c” to select “o” ERASE. Zoom bar Note that mistakenly erased images cannot be Pressing the zoom button during single-frame recove
ページ15に含まれる内容の要旨
Advanced Features p PHOTO MODE STILL IMAGE/MOVIE Advanced p PHOTO MODE STILL IMAGE ( ) 3 Features y QUALITY MODE NUMBER OF RECORDED PIXELS S SENSITIVITY 1Set the Power switch to “q”. 1Set the Power switch to “q”. 1 0 0 2 0 1 0 2 2Set the mode dial to Still Photography mode or 2Set the mode dial to Still Photography mode. 1 1 Movie mode. 3Press the Photo mode (p) button. 3Press the Photo mode (p) button. 3 0 0 3 ! In “r” Movie mode, you cannot set the ISO (sensitivity) setting. 1Press “g”
ページ16に含まれる内容の要旨
Advanced Features p PHOTO MODE STILL IMAGE p PHOTO MODE PLAYBACK ( ) J FinePix COLOR u HOW TO SPECIFY PRINT OPTIONS DPOF DPOF stands for Digital Print Order Format and refers to a format that is used for recording 1Set the Power switch to “q”. 1 0 2 0 printing specifications for images shot using a digital camera on media such as an xD- 2Set the mode dial to Still Photography mode. 1 Picture Card. The recorded specifications include information on which frames are to be 3Press the Photo mod
ページ17に含まれる内容の要旨
Advanced Features p PHOTO MODE PLAYBACK p PHOTO MODE PLAYBACK ( ) u HOW TO SPECIFY PRINT OPTIONS DPOF U DPOF ALL RESET 1Press “f” to select “WITH DATE” or “WITHOUT 1Set the Power switch to “w”. 1 0 0 2 0 1 0 2 DATE”. If you select “WITH DATE”, the date is 3 2Press the Photo mode (p) button. 1 imprinted on your prints. 2Press the “MENU/OK” button. 1Press “d” or “c” to select “U” DPOF ALL RESET. 0 1 0 2 2 2Press the “MENU/OK” button. When DPOF settings were specified
ページ18に含まれる内容の要旨
Advanced Features Closed (Aperture) Open STILL IMAGE MODE STILL IMAGE MODE ( ) ( ) FOCUSING DISTANCE EXPOSURE SHUTTER SPEED AND APERTURE FOCUSING EXPOSURE The distance from the subject to the camera is referred to as the shooting distance. Exposure refers to the light that hits the CCD or the total amount of captured light and determines When the shooting distance is set correctly and the image appears sharp, the image is focused. the brightness of the image. The exposure is determined by the c
ページ19に含まれる内容の要旨
Advanced Features NIGHT SPORT SCENE PORTRAIT STILL IMAGE MODE TAKING PICTURES — SELECTING THE CAMERA SETTINGS Consider the scene you are photographing and the sort of image you want to List of Functions Available in Each Mode achieve when you specify the camera settings. A general guide to the procedure ? Photography mode is given below. m , . / B NM < > r Select the Photography mode (➡P.38-42, 58, 59). 1 Function All settings other than the Quality, ISO sensitivity and FinePix color are B YE
ページ20に含まれる内容の要旨
Advanced Features STILL IMAGE MODE STILL IMAGE MODE B AUTO ? SCENE POSITION N PROGRAMMED AUTO Set the Mode dial to “N”. B AUTO This is an automatic mode that allows you to Set the Mode dial to “B”. specify any of the settings other than the shutter This is the easiest mode to use and can be used speed and aperture. This allows you to take shots for most types of shot. relatively simply in the same way as the Shutter- priority Auto and Aperture-priority Auto modes (program shift). ? SCENE POS
