ページ1に含まれる内容の要旨
TABLE OF CONTENTS
HITACHI
Instruction Manual
8mm Video Camera/Recorder
VM-H38A
Hitachi Home Electronics (America), Inc. HITACHI (HSC) CANADA INC.
3890 Steve Reynolds Blvd., Norcross, GA 30093 3300 Trans Canada Highway, Pointe Claire,
Tel. 404-279-5600 Quebec, H9R 1B1, CANADA
Tel. 514-697-9150
HITACHI SALES CORPORATION OF
HAWAII, INC.
3219 Koapaka Street, Honolulu, Hawaii 96819
Tel. 808-836-3621
E145554/E72118
P4707229 © Hitachi, Ltd. 1992 Printed in Ja
ページ2に含まれる内容の要旨
TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS............................................................................................................................ 2 IMPORTANT SAFEGUARDS..................................................................................................................... 3 FEATURES ................................................................................................................................................. 5 ACCESSORIES ......
ページ3に含まれる内容の要旨
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warms the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part o
ページ4に含まれる内容の要旨
IMPORTANT SAFEGUARDS MOISTURE Moisture may occur if the video camera/recorder is moved from a cold area to a warm humid area. A flashing "DEW" indication in the viewfinder indicates that moisture has condensed on the recorder mechanism, which could result in tape damage. Since condensation builds up gradually, the indication does not appear immediately when condensation starts. When the temperature or humidity of the room changes abruptly, turn the power on and check that the "DEW" indica
ページ5に含まれる内容の要旨
FEATURES FEATURES • Hi8 • Fade-in/Fade-out • Electronic Image Stabilizer (EIS) • Auto Focus Power Zoom Lens with macro feature • Digital Filter • Flying Erase Head • Digital Zoom up to X16 • Time and date • Solid-state camera pickup • Titler • Program AE (Auto Exposure) • Wireless Remote Control ACCESSORIES Check that you have the following components and accessories (besides the camera/recorder unit itself) before disposing of the packing material. 1. AV Stereo Output
ページ6に含まれる内容の要旨
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Camera/Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for f
ページ7に含まれる内容の要旨
IMPORTANT SAFEGUARDS Caution: Maintain electrical safety. Powerline operated equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the accessory itself and should not have been modified so as to defeat the safety features. This will help avoid any potential hazard from electric shock or fire. If in doubt, contact qualified service personnel. 10 Water and Moisture -- Do not use this video product near water - for example, near a bath t
ページ8に含まれる内容の要旨
IMPORTANT SAFEGUARDS SERVICE 17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18 Conditions Requiring Service -- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged b. If liquid has been spilled, or object
ページ9に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER 1. Save these instructions -- This page contains important safety and operating instructions for AC Adapter/Charger Model VM-AC 82A. 2. Before using AC Adapter/Charger, read all instructions and cautionary markings on (1) AC Adapter/Charger, (2) battery and (3) product using battery. 3. Also read all instructions on pages 4 and 5. 4. Caution -- To reduce risk of injury, charge only r
ページ10に含まれる内容の要旨
Hi8 Hi8 has realized high resolution and high picture quality when compared to the standard format. Compatibilty with conventional video camera/recorder • video cassettes are recorded in the format when the switch of this camera/recorder is set to "AUTO", and recorded in the format when it is set to "OFF". • video cassettes are recorded in the format regardless of the position of the switch. • During playback, the recording format is discriminated automatically and vide
ページ11に含まれる内容の要旨
HOW TO ATTACH THE SHOULDER STRAP HOW TO ATTACH THE SHOULDER STRAP Attach the shoulder strap (provided), as illustrated. LOADING BATTERIES FOR DATE/TIME AND REMOTE CONTROL You may want to install the date/time and remote control batteries (provided) immediately to prevent misplacing them. For date/time 1. Pull the battery holder. 2. Insert the date/time battery with the "+" terminal facing up. 3. Fully insert the battery hjolder into the camera/recorder. For remote control
ページ12に含まれる内容の要旨
POWER SOURCES NOTES: • When replacing the batteries, use 3V micro lithium cell such as Maxell CR2025 or equivalent. • Instructions for setting the date and time are on page 22. You can do that later if desired after you're more familiar with your camera/recorder. • Dispose of battery safely and in accordance with local laws. • Do not dispose of in fire. WARNING: Keep this battery away from children. If swallowed, consult a physician immediately for emergency treatment. POWER SOURCES
ページ13に含まれる内容の要旨
CHECKING THE BATTERY WHEN USING WITH THE AC ADAPTER/CHARGER (provided) 1. Plug the AC adapter/charger power cord into an AC electrical output; the "POWER" indicator on the AC adapter/charger will come on. 2. Attach the external power adapter (provided) to the camera/recorder as shown in the figure. Align the marks and hold the external power adapter flush against the camera/recorder. Then attach it using the same procedure used when attaching the battery. 3. Connect the external power
ページ14に含まれる内容の要旨
CHECKING THE BATTERY When the " " indication appears in the viewfinder and flashes while the camera/recorder is being operated with a battery (provided), it indicates that the battery charge is low. Charge it or replace it with a charged battery. NOTE: Whenever the linear time counter is present in the viewfinder, the battery level indicator " " is displayed in the viewfinder indicating the condition of camera/recorder battery power. When the battery is fully charged, " " is displayed.
ページ15に含まれる内容の要旨
CHARGING THE BATTERY CHARGING THE BATTERY 1. Plug the AC adapter/charger power cord into AC electrical outlet. 2. Attach the battery to the AC adapter/charger. Align the " " mark on the battery with that of AC adapter/charger and push the battery flush with the AC adapter/charger and slide it in the direction of arrow. NOTES: • You must remove the external power adapter from the AC adapter/charger to charge the battery. If the external power adapter is connected, "CHARGE" light will f
ページ16に含まれる内容の要旨
INSERTION AND REMOVAL OF CASSETES INSERTION AND REMOVAL OF CASSETES Before inserting or removing a cassette, be sure to connect the power source. When a power source is connected, the cassette can be ejected and removed whether the power is on or off. Insertion 1. Slide the "EJECT" switch. The cassette door will open. 2. Insert a cassette so the transparent window is toward you and the arrow toward the cassette holder. Slide the cassette into cassette holder as far as it will go.
ページ17に含まれる内容の要旨
MAKING A SAMPLE CAMERA RECORDING MAKING A SAMPLE CAMERA RECORDING 1. Connect the POWER SOURCE. (See pages 11 and 12.) 2. Slide "EJECT" switch and insert tha cassette so the transparent window is toward you and the arrow toward the cassette holder. Slide the cassette into cassette holder as far as it will go. NOTE: If the power source is not connected to the camera/recorder, the cassette holder will not open. 3. Press the cassette holder. The holder will latch in the operating position.
ページ18に含まれる内容の要旨
MAKING A SAMPLE CAMERA RECORDING NOTE: If you connect the camera/recorder to your TV, you can see the picture played back on your TV. Refer to "VIEWING THE PICTURE PLAYED BACK ON YOUR TV" on page 37. 11. After playing, press "STOP" button. 12. Slide the power switch to "OFF" and then slide "EJECT" switch to remove cassette. 13. Always remove the power source from the camera/recorder after use. See "POWER SOURCES" on page 11. NOTE: If you have a cassette tape that has already been pa
ページ19に含まれる内容の要旨
IDENTIFICATION AND OPERATION OF CONTROLS IDENTIFICATION AND OPERATION OF CONTROLS Left side Illustration 1. Lens F1.4 (6~48mm) 8:1 power zoom lens features auto focus and auto iris functions. 2. "ZOOM MODE" Button Use this button to switch the digital zoom feature. Usually press this button so that "ZM:1" appears in the viewfinder. (See "DIGITAL ZOOM" on page 25.) 3. "EIS" (Electronic Image Stabilizer) Button Press to display (hand) in the viewfinder. EIS corrects slight shaking of the
ページ20に含まれる内容の要旨
IDENTIFICATION AND OPERATION OF CONTROLS 18. "AV IN/OUT" Jack (Behind the door) Use the RF output adapter (provided) to connect this jack to a TV to view the pictures played back by the camera/recorder. Use the AV input cord (provided) to connect this jack to a TV or VCR to record pictures from the VCR or TV. 19. Hand Strap Adjust to best fit your hand. 20. Power Supply Attachment Section Attach the battery (provided) or external power adapter (provided) here. 21. Date/Time Battery Com
