Panasonic LumixDMC-XS1GNの取扱説明書

デバイスPanasonic LumixDMC-XS1GNの取扱説明書

デバイス: Panasonic LumixDMC-XS1GN
カテゴリ: デジタルカメラ
メーカー: Panasonic
サイズ: 6.83 MB
追加した日付: 11/25/2014
ページ数: 39
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスPanasonic LumixDMC-XS1GNの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Panasonic LumixDMC-XS1GNに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Panasonic LumixDMC-XS1GNをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Panasonic LumixDMC-XS1GNのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Panasonic LumixDMC-XS1GNの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Panasonic LumixDMC-XS1GN 取扱説明書 - Online PDF
Advertisement
« Page 1 of 39 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Panasonic LumixDMC-XS1GNを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Panasonic LumixDMC-XS1GNの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

ORDER NO. DSC1302004CE
B26
Digital Camera
Model No. DMC-XS1P
DMC-XS1PC
DMC-XS1PU
DMC-XS1EB
DMC-XS1EE
DMC-XS1EF
DMC-XS1EG
DMC-XS1EP
DMC-XS1GA
DMC-XS1GC
DMC-XS1GF
DMC-XS1GK
DMC-XS1GN
DMC-XS1GT
Colour
(W)..........White Type
(K)...........Black Type
(R)...........Red Type (except PC)
(WA)........White Type (only EB/EG/EP)
(V)............Violet Type (only EB/EF/EG/EP/GC/GF/GN)
© Panasonic Corporation 2013 Unauthorized copy-
ing and distribution is a violation of law.

ページ2に含まれる内容の要旨

TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure. 1)--------3 1.4. How to Discharge the E.Capacitor on Flash Top P.C.B.----------------------------------------------------4 2Warning --------------------------------------------------------------5 2.1. Prevention of Electrostatic Di

ページ3に含まれる内容の要旨

1 Safety Precautions 1.1. General Guidelines 1.3. Leakage Current Hot Check 1. IMPORTANT SAFETY NOTICE (See Figure. 1) There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check. 2. Connect a 1.5 k Ω, 10 W resistor, in parallel with a 0.15 μF in the Schematic Diagrams, Circuit Board Layout, capacitor, between each exposed metallic part on the set

ページ4に含まれる内容の要旨

1.4. How to Discharge the E.Capacitor on Flash Top P.C.B. CAUTION: • Be sure to discharge the E.Capacitor on Flash Top P.C.B. before disassembling. • Be careful of the high voltage circuit on Flash Top P.C.B. when servicing. [Discharging Procedure] 1. Put the insulation tube on the lead part of resistor (ERG5SJ102:1k Ω /5W). (An equivalent type of resistor may be used.) 2. Put the resistor between both terminals of E.Capacitor on the Flash Top P.C.B. for approx. 5 seconds. 3. After discharging,

ページ5に含まれる内容の要旨

2Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain

ページ6に含まれる内容の要旨

3 Service Navigation 3.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual. 3.2. Important Notice 3.2.1. CCD FPC UNIT: • The image sensor (CCD FPC) unit which are connected to the lens unit with 3

ページ7に含まれる内容の要旨

3.3. General Description About Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 °C (86 °F) mo

ページ8に含まれる内容の要旨

3.4. How to Define the Model Suffix (NTSC or PAL model) There are seven kinds of DMC-XS1, regardless of the colours. • a) DMC-XS1 (Japan domestic model) • b) DMC-XS1P/PC • c) DMC-XS1EB/EF/EG/EP • d) DMC-XS1EE • e) DMC-XS1GT • f) DMC-XS1GN • g) DMC-XS1PU/GA/GC/GF/GK What is the difference is that the “INITIAL SETTINGS” data which is stored in Flash-ROM mounted on Main P.C.B.. 3.4.1. Defining methods: To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom

ページ9に含まれる内容の要旨

3.4.2. INITIAL SETTINGS: After replacing the Main P.C.B., make sure to perform the initial settings after achieving the adjustment by ordering the following procedure in accordance with model suffix of the unit. 1. IMPORTANT NOTICE: Before proceeding Initial settings, make sure to read the following CAUTIONS. 2. PROCEDURES: • Precautions: Read the above “CAUTION 1” and “CAUTION 2”, carefully. • Preparation: - Attach the Battery. (Since this unit has built-in memory, it can be performed without i

ページ10に含まれる内容の要旨

• Step 4. Display the INITIAL SETTING: While pressing [ MENU/SET ] button and “[ RIGHT ] of Cursor button” simultaneously, turn the Power off. The “INITIAL SETTINGS” menu is displayed. There are two kinds of “INITIAL SETTINGS” menu form as follows: [CASE 1. After replacing Main P.C.B.] When Main P.C.B. has just been replaced, all of the model suffix is displayed as follows. (Five pages in total) [CASE 2. Other than “After replacing Main P.C.B.”] • Step 5. Choose the model suffix in “INITIAL SETT

ページ11に含まれる内容の要旨

• Step 6. Set the model suffix in “INITIAL SETTINGS”: Press the “[ RIGHT ] of Cursor buttons”. The only set area is displayed, and then press the “[ RIGHT ] of Cursor buttons” after confirmation. (The unit is powered off automatically.) • Step 7. CONFIRMATION: Confirm the display of “PLEASE SET THE CLOCK” in concerned language when the unit is turned on again. When the unit is connected to PC with USB cable, it is detected as removable media. (When the “GK” or “GT” model suffix is selected, th

ページ12に含まれる内容の要旨

4 Specifications The following specification is for DMC-XS1P/DMC-FH10P. Some specifications may differ depending on model suffix. 12

ページ13に含まれる内容の要旨

5 Location of Controls and Components The following description is for DMC-XS1P. Some descriptions may differ depending on model suffix. 13

ページ14に含まれる内容の要旨

14

ページ15に含まれる内容の要旨

6 Service Mode 6.1. Error Code Memory Function 1. General description This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the latest. When the error is occurred more than 16, the oldest error is overwritten in sequence. The error code is not memorized when the power supply is shut down forcibly (i.e.,when the unit is powered on by the battery, the battery is pulled out) The error code is memorized to Flash-ROM when the unit has j

ページ16に含まれる内容の要旨

Error Code List The error code consists of 8 bits data and it shows the following information. 16

ページ17に含まれる内容の要旨

Important notice about “Error Code List” 1) About “*” indication: The third digit from the left is different as follows. - In case of 0 (example: 18001000) When the third digit from the left shows “0”, this error occurred under the condition of INITIAL SETTINGS has been completed. It means that this error is occurred basically at user side. - In case of 8 (example: 18801000) When the third digit from the left shows “8”, this error occurred under the condition of INITIAL SETTINGS has been releas

ページ18に含まれる内容の要旨

7 Service Fixture & Tools 7.1. Service Fixture and Tools The following Service Fixture and tools are used for checking and servicing this unit. 7.2. When Replacing the Main P.C.B. After replacing the Main P.C.B., be sure to achieve adjustment. The service software is available at “TSN Website”. 18

ページ19に含まれる内容の要旨

7.3. Service Position Check the Flash Top P.C.B., when servicing this DSC.(Refer to the following.) CAUTION. (When servicing Flash Top P.C.B.) 1. Be sure to discharge the E.Capacitor on Flash Top P.C.B.. Refer to “How to Discharge the E.Capacitor on Flash Top P.C.B.”. The E.Capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed. 2. Be careful of the high voltage circuit on Flash Top P.C.B.. 3. DO NOT allow other parts to touch the high voltage circuit on

ページ20に含まれる内容の要旨

8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart This is a disassembling chart. When assembling, perform this chart conversely. 8.2. P.C.B. Location 20


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Panasonic AJ- P 取扱説明書 デジタルカメラ 9
2 Panasonic AJ-D215P 取扱説明書 デジタルカメラ 8
3 Panasonic AJ-D900WP 取扱説明書 デジタルカメラ 0
4 Panasonic AJ-D900WAP 取扱説明書 デジタルカメラ 5
5 Panasonic AJ-D610WA 取扱説明書 デジタルカメラ 11
6 Panasonic AJ-D910WBP 取扱説明書 デジタルカメラ 2
7 Panasonic AJ-HC1500G 取扱説明書 デジタルカメラ 1
8 Panasonic AJ-HDC27FE 取扱説明書 デジタルカメラ 8
9 Panasonic AJ-P VQT0A45 取扱説明書 デジタルカメラ 0
10 Panasonic AK-HBU931P 取扱説明書 デジタルカメラ 0
11 Panasonic AJ-SDC915 取扱説明書 デジタルカメラ 1
12 Panasonic AJ-HDC27FP 取扱説明書 デジタルカメラ 22
13 Panasonic AJ-D400 取扱説明書 デジタルカメラ 59
14 Panasonic AJ-PD900WP 取扱説明書 デジタルカメラ 0
15 Panasonic AK-HC3500P 取扱説明書 デジタルカメラ 31
16 Sony 3D Bloggie MHS-FS3 取扱説明書 デジタルカメラ 35
17 Sony 838 MHz to 862 MHz 取扱説明書 デジタルカメラ 7
18 Sony 4-133-499-11 (1) 取扱説明書 デジタルカメラ 15
19 Sony 4-187-045-11(1) 取扱説明書 デジタルカメラ 1
20 Sony 4-132-058-11(1) 取扱説明書 デジタルカメラ 5